linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian Masney <masneyb@onstation.org>
To: robdclark@gmail.com, sean@poorly.run, robh+dt@kernel.org
Cc: airlied@linux.ie, daniel@ffwll.ch, jcrouse@codeaurora.org,
	dianders@chromium.org, linux-arm-msm@vger.kernel.org,
	dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org
Subject: [PATCH v2 2/4] drm/msm/gpu: add support for ocmem interconnect path
Date: Thu, 21 Nov 2019 20:26:43 -0500	[thread overview]
Message-ID: <20191122012645.7430-3-masneyb@onstation.org> (raw)
In-Reply-To: <20191122012645.7430-1-masneyb@onstation.org>

Some A3xx and all A4xx Adreno GPUs do not have GMEM inside the GPU core
and must use the On Chip MEMory (OCMEM) in order to be functional.
There's a separate interconnect path that needs to be setup to OCMEM.
Add support for this second path to the GPU core.

In the downstream MSM 3.4 sources, the two interconnect paths for the
GPU are between:

  - MSM_BUS_MASTER_GRAPHICS_3D and MSM_BUS_SLAVE_EBI_CH0
  - MSM_BUS_MASTER_V_OCMEM_GFX3D and MSM_BUS_SLAVE_OCMEM

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
 drivers/gpu/drm/msm/adreno/adreno_gpu.c | 14 +++++++++++++-
 drivers/gpu/drm/msm/msm_gpu.h           |  7 +++++++
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 0783e4b5486a..d27bdc999777 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -887,10 +887,21 @@ static int adreno_get_pwrlevels(struct device *dev,
 	DBG("fast_rate=%u, slow_rate=27000000", gpu->fast_rate);
 
 	/* Check for an interconnect path for the bus */
-	gpu->icc_path = of_icc_get(dev, NULL);
+	gpu->icc_path = of_icc_get(dev, "gfx-mem");
+	if (!gpu->icc_path) {
+		/*
+		 * Keep compatbility with device trees that don't have an
+		 * interconnect-names property.
+		 */
+		gpu->icc_path = of_icc_get(dev, NULL);
+	}
 	if (IS_ERR(gpu->icc_path))
 		gpu->icc_path = NULL;
 
+	gpu->ocmem_icc_path = of_icc_get(dev, "ocmem");
+	if (IS_ERR(gpu->ocmem_icc_path))
+		gpu->ocmem_icc_path = NULL;
+
 	return 0;
 }
 
@@ -977,6 +988,7 @@ void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu)
 		release_firmware(adreno_gpu->fw[i]);
 
 	icc_put(gpu->icc_path);
+	icc_put(gpu->ocmem_icc_path);
 
 	msm_gpu_cleanup(&adreno_gpu->base);
 }
diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h
index ab8f0f9c9dc8..be5bc2e8425c 100644
--- a/drivers/gpu/drm/msm/msm_gpu.h
+++ b/drivers/gpu/drm/msm/msm_gpu.h
@@ -111,8 +111,15 @@ struct msm_gpu {
 	struct clk *ebi1_clk, *core_clk, *rbbmtimer_clk;
 	uint32_t fast_rate;
 
+	/* The gfx-mem interconnect path that's used by all GPU types. */
 	struct icc_path *icc_path;
 
+	/*
+	 * Second interconnect path for some A3xx and all A4xx GPUs to the
+	 * On Chip MEMory (OCMEM).
+	 */
+	struct icc_path *ocmem_icc_path;
+
 	/* Hang and Inactivity Detection:
 	 */
 #define DRM_MSM_INACTIVE_PERIOD   66 /* in ms (roughly four frames) */
-- 
2.21.0


  parent reply	other threads:[~2019-11-22  1:27 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-22  1:26 [PATCH v2 0/4] drm/msm/gpu: add support for ocmem interconnect Brian Masney
2019-11-22  1:26 ` [PATCH v2 1/4] dt-bindings: drm/msm/gpu: document second interconnect Brian Masney
2019-12-04 19:36   ` Rob Herring
2019-12-12  7:14   ` Bjorn Andersson
2019-11-22  1:26 ` Brian Masney [this message]
2019-12-12  7:12   ` [PATCH v2 2/4] drm/msm/gpu: add support for ocmem interconnect path Bjorn Andersson
2019-11-22  1:26 ` [PATCH v2 3/4] drm/msm/a3xx: set interconnect bandwidth vote Brian Masney
2019-12-12  7:17   ` Bjorn Andersson
2019-11-22  1:26 ` [PATCH v2 4/4] drm/msm/a4xx: " Brian Masney
2019-12-12  7:18   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191122012645.7430-3-masneyb@onstation.org \
    --to=masneyb@onstation.org \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jcrouse@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robdclark@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).