From: Zhou Yanjie <zhouyanjie@zoho.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org,
paul.burton@mips.com, paulburton@kernel.org,
mark.rutland@arm.com, linus.walleij@linaro.org,
paul@crapouillou.net
Subject: [PATCH RESEND v4 1/4] pinctrl: Ingenic: Fix bugs in X1000 and X1500.
Date: Sun, 24 Nov 2019 02:30:03 +0800 [thread overview]
Message-ID: <1574533806-112333-2-git-send-email-zhouyanjie@zoho.com> (raw)
In-Reply-To: <1574533806-112333-1-git-send-email-zhouyanjie@zoho.com>
1.Fix the pullup parameter of X1000.
2.X1000 and X1500 have only one set of uart1 hwflow pin mapping,
so modify "uart1_hwflow_d" to "uart1_hwflow".
3.X1000 has only one set of mmc1 pin mapping, so modify
"mmc1-1bit-e/mmc1-4bit-e" to "mmc1-1bit/mmc1-4bit".
4.X1000 has only one regular externel memory controller that
does not support nand flash, so change "nemc_" to "emc_".
5.X1500 has only one set of mmc, so modify "mmc0_" to "mmc_".
Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
Notes:
v1->v2:
Modify "nemc_" to "emc_" because X1000 has only one regular externel
memory controller that does not support nand flash.
v2->v3:
No change.
v3->v4:
No change.
drivers/pinctrl/pinctrl-ingenic.c | 94 +++++++++++++++++++--------------------
1 file changed, 47 insertions(+), 47 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 6e26830..059e39a 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1017,7 +1017,7 @@ static const struct ingenic_chip_info jz4780_chip_info = {
};
static const u32 x1000_pull_ups[4] = {
- 0xffffffff, 0x8dffffff, 0x7d3fffff, 0xffffffff,
+ 0xffffffff, 0xfdffffff, 0x0dffffff, 0x0000003f,
};
static const u32 x1000_pull_downs[4] = {
@@ -1028,7 +1028,7 @@ static int x1000_uart0_data_pins[] = { 0x4a, 0x4b, };
static int x1000_uart0_hwflow_pins[] = { 0x4c, 0x4d, };
static int x1000_uart1_data_a_pins[] = { 0x04, 0x05, };
static int x1000_uart1_data_d_pins[] = { 0x62, 0x63, };
-static int x1000_uart1_hwflow_d_pins[] = { 0x64, 0x65, };
+static int x1000_uart1_hwflow_pins[] = { 0x64, 0x65, };
static int x1000_uart2_data_a_pins[] = { 0x02, 0x03, };
static int x1000_uart2_data_d_pins[] = { 0x65, 0x64, };
static int x1000_mmc0_1bit_pins[] = { 0x18, 0x19, 0x17, };
@@ -1036,20 +1036,20 @@ static int x1000_mmc0_4bit_pins[] = { 0x16, 0x15, 0x14, };
static int x1000_mmc0_8bit_pins[] = { 0x13, 0x12, 0x11, 0x10, };
static int x1000_mmc1_1bit_pins[] = { 0x40, 0x41, 0x42, };
static int x1000_mmc1_4bit_pins[] = { 0x43, 0x44, 0x45, };
-static int x1000_nemc_8bit_data_pins[] = {
+static int x1000_emc_8bit_data_pins[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
};
-static int x1000_nemc_16bit_data_pins[] = {
+static int x1000_emc_16bit_data_pins[] = {
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
};
-static int x1000_nemc_addr_pins[] = {
+static int x1000_emc_addr_pins[] = {
0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
};
-static int x1000_nemc_rd_we_pins[] = { 0x30, 0x31, };
-static int x1000_nemc_wait_pins[] = { 0x34, };
-static int x1000_nemc_cs1_pins[] = { 0x32, };
-static int x1000_nemc_cs2_pins[] = { 0x33, };
+static int x1000_emc_rd_we_pins[] = { 0x30, 0x31, };
+static int x1000_emc_wait_pins[] = { 0x34, };
+static int x1000_emc_cs1_pins[] = { 0x32, };
+static int x1000_emc_cs2_pins[] = { 0x33, };
static int x1000_i2c0_pins[] = { 0x38, 0x37, };
static int x1000_i2c1_a_pins[] = { 0x01, 0x00, };
static int x1000_i2c1_c_pins[] = { 0x5b, 0x5a, };
@@ -1078,7 +1078,7 @@ static int x1000_uart0_data_funcs[] = { 0, 0, };
static int x1000_uart0_hwflow_funcs[] = { 0, 0, };
static int x1000_uart1_data_a_funcs[] = { 2, 2, };
static int x1000_uart1_data_d_funcs[] = { 1, 1, };
-static int x1000_uart1_hwflow_d_funcs[] = { 1, 1, };
+static int x1000_uart1_hwflow_funcs[] = { 1, 1, };
static int x1000_uart2_data_a_funcs[] = { 2, 2, };
static int x1000_uart2_data_d_funcs[] = { 0, 0, };
static int x1000_mmc0_1bit_funcs[] = { 1, 1, 1, };
@@ -1086,15 +1086,15 @@ static int x1000_mmc0_4bit_funcs[] = { 1, 1, 1, };
static int x1000_mmc0_8bit_funcs[] = { 1, 1, 1, 1, 1, };
static int x1000_mmc1_1bit_funcs[] = { 0, 0, 0, };
static int x1000_mmc1_4bit_funcs[] = { 0, 0, 0, };
-static int x1000_nemc_8bit_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
-static int x1000_nemc_16bit_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
-static int x1000_nemc_addr_funcs[] = {
+static int x1000_emc_8bit_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
+static int x1000_emc_16bit_data_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
+static int x1000_emc_addr_funcs[] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
};
-static int x1000_nemc_rd_we_funcs[] = { 0, 0, };
-static int x1000_nemc_wait_funcs[] = { 0, };
-static int x1000_nemc_cs1_funcs[] = { 0, };
-static int x1000_nemc_cs2_funcs[] = { 0, };
+static int x1000_emc_rd_we_funcs[] = { 0, 0, };
+static int x1000_emc_wait_funcs[] = { 0, };
+static int x1000_emc_cs1_funcs[] = { 0, };
+static int x1000_emc_cs2_funcs[] = { 0, };
static int x1000_i2c0_funcs[] = { 0, 0, };
static int x1000_i2c1_a_funcs[] = { 2, 2, };
static int x1000_i2c1_c_funcs[] = { 0, 0, };
@@ -1116,7 +1116,7 @@ static const struct group_desc x1000_groups[] = {
INGENIC_PIN_GROUP("uart0-hwflow", x1000_uart0_hwflow),
INGENIC_PIN_GROUP("uart1-data-a", x1000_uart1_data_a),
INGENIC_PIN_GROUP("uart1-data-d", x1000_uart1_data_d),
- INGENIC_PIN_GROUP("uart1-hwflow-d", x1000_uart1_hwflow_d),
+ INGENIC_PIN_GROUP("uart1-hwflow", x1000_uart1_hwflow),
INGENIC_PIN_GROUP("uart2-data-a", x1000_uart2_data_a),
INGENIC_PIN_GROUP("uart2-data-d", x1000_uart2_data_d),
INGENIC_PIN_GROUP("mmc0-1bit", x1000_mmc0_1bit),
@@ -1124,13 +1124,13 @@ static const struct group_desc x1000_groups[] = {
INGENIC_PIN_GROUP("mmc0-8bit", x1000_mmc0_8bit),
INGENIC_PIN_GROUP("mmc1-1bit", x1000_mmc1_1bit),
INGENIC_PIN_GROUP("mmc1-4bit", x1000_mmc1_4bit),
- INGENIC_PIN_GROUP("nemc-8bit-data", x1000_nemc_8bit_data),
- INGENIC_PIN_GROUP("nemc-16bit-data", x1000_nemc_16bit_data),
- INGENIC_PIN_GROUP("nemc-addr", x1000_nemc_addr),
- INGENIC_PIN_GROUP("nemc-rd-we", x1000_nemc_rd_we),
- INGENIC_PIN_GROUP("nemc-wait", x1000_nemc_wait),
- INGENIC_PIN_GROUP("nemc-cs1", x1000_nemc_cs1),
- INGENIC_PIN_GROUP("nemc-cs2", x1000_nemc_cs2),
+ INGENIC_PIN_GROUP("emc-8bit-data", x1000_emc_8bit_data),
+ INGENIC_PIN_GROUP("emc-16bit-data", x1000_emc_16bit_data),
+ INGENIC_PIN_GROUP("emc-addr", x1000_emc_addr),
+ INGENIC_PIN_GROUP("emc-rd-we", x1000_emc_rd_we),
+ INGENIC_PIN_GROUP("emc-wait", x1000_emc_wait),
+ INGENIC_PIN_GROUP("emc-cs1", x1000_emc_cs1),
+ INGENIC_PIN_GROUP("emc-cs2", x1000_emc_cs2),
INGENIC_PIN_GROUP("i2c0-data", x1000_i2c0),
INGENIC_PIN_GROUP("i2c1-data-a", x1000_i2c1_a),
INGENIC_PIN_GROUP("i2c1-data-c", x1000_i2c1_c),
@@ -1149,21 +1149,21 @@ static const struct group_desc x1000_groups[] = {
static const char *x1000_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
static const char *x1000_uart1_groups[] = {
- "uart1-data-a", "uart1-data-d", "uart1-hwflow-d",
+ "uart1-data-a", "uart1-data-d", "uart1-hwflow",
};
static const char *x1000_uart2_groups[] = { "uart2-data-a", "uart2-data-d", };
static const char *x1000_mmc0_groups[] = {
"mmc0-1bit", "mmc0-4bit", "mmc0-8bit",
};
static const char *x1000_mmc1_groups[] = {
- "mmc1-1bit-e", "mmc1-4bit-e",
+ "mmc1-1bit", "mmc1-4bit",
};
-static const char *x1000_nemc_groups[] = {
- "nemc-8bit-data", "nemc-16bit-data",
- "nemc-addr", "nemc-rd-we", "nemc-wait",
+static const char *x1000_emc_groups[] = {
+ "emc-8bit-data", "emc-16bit-data",
+ "emc-addr", "emc-rd-we", "emc-wait",
};
-static const char *x1000_cs1_groups[] = { "nemc-cs1", };
-static const char *x1000_cs2_groups[] = { "nemc-cs2", };
+static const char *x1000_cs1_groups[] = { "emc-cs1", };
+static const char *x1000_cs2_groups[] = { "emc-cs2", };
static const char *x1000_i2c0_groups[] = { "i2c0-data", };
static const char *x1000_i2c1_groups[] = { "i2c1-data-a", "i2c1-data-c", };
static const char *x1000_i2c2_groups[] = { "i2c2-data", };
@@ -1184,9 +1184,9 @@ static const struct function_desc x1000_functions[] = {
{ "uart2", x1000_uart2_groups, ARRAY_SIZE(x1000_uart2_groups), },
{ "mmc0", x1000_mmc0_groups, ARRAY_SIZE(x1000_mmc0_groups), },
{ "mmc1", x1000_mmc1_groups, ARRAY_SIZE(x1000_mmc1_groups), },
- { "nemc", x1000_nemc_groups, ARRAY_SIZE(x1000_nemc_groups), },
- { "nemc-cs1", x1000_cs1_groups, ARRAY_SIZE(x1000_cs1_groups), },
- { "nemc-cs2", x1000_cs2_groups, ARRAY_SIZE(x1000_cs2_groups), },
+ { "emc", x1000_emc_groups, ARRAY_SIZE(x1000_emc_groups), },
+ { "emc-cs1", x1000_cs1_groups, ARRAY_SIZE(x1000_cs1_groups), },
+ { "emc-cs2", x1000_cs2_groups, ARRAY_SIZE(x1000_cs2_groups), },
{ "i2c0", x1000_i2c0_groups, ARRAY_SIZE(x1000_i2c0_groups), },
{ "i2c1", x1000_i2c1_groups, ARRAY_SIZE(x1000_i2c1_groups), },
{ "i2c2", x1000_i2c2_groups, ARRAY_SIZE(x1000_i2c2_groups), },
@@ -1224,11 +1224,11 @@ static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, };
static int x1500_uart0_hwflow_pins[] = { 0x4c, 0x4d, };
static int x1500_uart1_data_a_pins[] = { 0x04, 0x05, };
static int x1500_uart1_data_d_pins[] = { 0x62, 0x63, };
-static int x1500_uart1_hwflow_d_pins[] = { 0x64, 0x65, };
+static int x1500_uart1_hwflow_pins[] = { 0x64, 0x65, };
static int x1500_uart2_data_a_pins[] = { 0x02, 0x03, };
static int x1500_uart2_data_d_pins[] = { 0x65, 0x64, };
-static int x1500_mmc0_1bit_pins[] = { 0x18, 0x19, 0x17, };
-static int x1500_mmc0_4bit_pins[] = { 0x16, 0x15, 0x14, };
+static int x1500_mmc_1bit_pins[] = { 0x18, 0x19, 0x17, };
+static int x1500_mmc_4bit_pins[] = { 0x16, 0x15, 0x14, };
static int x1500_i2c0_pins[] = { 0x38, 0x37, };
static int x1500_i2c1_a_pins[] = { 0x01, 0x00, };
static int x1500_i2c1_c_pins[] = { 0x5b, 0x5a, };
@@ -1247,11 +1247,11 @@ static int x1500_uart0_data_funcs[] = { 0, 0, };
static int x1500_uart0_hwflow_funcs[] = { 0, 0, };
static int x1500_uart1_data_a_funcs[] = { 2, 2, };
static int x1500_uart1_data_d_funcs[] = { 1, 1, };
-static int x1500_uart1_hwflow_d_funcs[] = { 1, 1, };
+static int x1500_uart1_hwflow_funcs[] = { 1, 1, };
static int x1500_uart2_data_a_funcs[] = { 2, 2, };
static int x1500_uart2_data_d_funcs[] = { 0, 0, };
-static int x1500_mmc0_1bit_funcs[] = { 1, 1, 1, };
-static int x1500_mmc0_4bit_funcs[] = { 1, 1, 1, };
+static int x1500_mmc_1bit_funcs[] = { 1, 1, 1, };
+static int x1500_mmc_4bit_funcs[] = { 1, 1, 1, };
static int x1500_i2c0_funcs[] = { 0, 0, };
static int x1500_i2c1_a_funcs[] = { 2, 2, };
static int x1500_i2c1_c_funcs[] = { 0, 0, };
@@ -1268,11 +1268,11 @@ static const struct group_desc x1500_groups[] = {
INGENIC_PIN_GROUP("uart0-hwflow", x1500_uart0_hwflow),
INGENIC_PIN_GROUP("uart1-data-a", x1500_uart1_data_a),
INGENIC_PIN_GROUP("uart1-data-d", x1500_uart1_data_d),
- INGENIC_PIN_GROUP("uart1-hwflow-d", x1500_uart1_hwflow_d),
+ INGENIC_PIN_GROUP("uart1-hwflow", x1500_uart1_hwflow),
INGENIC_PIN_GROUP("uart2-data-a", x1500_uart2_data_a),
INGENIC_PIN_GROUP("uart2-data-d", x1500_uart2_data_d),
- INGENIC_PIN_GROUP("mmc0-1bit", x1500_mmc0_1bit),
- INGENIC_PIN_GROUP("mmc0-4bit", x1500_mmc0_4bit),
+ INGENIC_PIN_GROUP("mmc-1bit", x1500_mmc_1bit),
+ INGENIC_PIN_GROUP("mmc-4bit", x1500_mmc_4bit),
INGENIC_PIN_GROUP("i2c0-data", x1500_i2c0),
INGENIC_PIN_GROUP("i2c1-data-a", x1500_i2c1_a),
INGENIC_PIN_GROUP("i2c1-data-c", x1500_i2c1_c),
@@ -1288,10 +1288,10 @@ static const struct group_desc x1500_groups[] = {
static const char *x1500_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
static const char *x1500_uart1_groups[] = {
- "uart1-data-a", "uart1-data-d", "uart1-hwflow-d",
+ "uart1-data-a", "uart1-data-d", "uart1-hwflow",
};
static const char *x1500_uart2_groups[] = { "uart2-data-a", "uart2-data-d", };
-static const char *x1500_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", };
+static const char *x1500_mmc_groups[] = { "mmc-1bit", "mmc-4bit", };
static const char *x1500_i2c0_groups[] = { "i2c0-data", };
static const char *x1500_i2c1_groups[] = { "i2c1-data-a", "i2c1-data-c", };
static const char *x1500_i2c2_groups[] = { "i2c2-data", };
@@ -1307,7 +1307,7 @@ static const struct function_desc x1500_functions[] = {
{ "uart0", x1500_uart0_groups, ARRAY_SIZE(x1500_uart0_groups), },
{ "uart1", x1500_uart1_groups, ARRAY_SIZE(x1500_uart1_groups), },
{ "uart2", x1500_uart2_groups, ARRAY_SIZE(x1500_uart2_groups), },
- { "mmc0", x1500_mmc0_groups, ARRAY_SIZE(x1500_mmc0_groups), },
+ { "mmc", x1500_mmc_groups, ARRAY_SIZE(x1500_mmc_groups), },
{ "i2c0", x1500_i2c0_groups, ARRAY_SIZE(x1500_i2c0_groups), },
{ "i2c1", x1500_i2c1_groups, ARRAY_SIZE(x1500_i2c1_groups), },
{ "i2c2", x1500_i2c2_groups, ARRAY_SIZE(x1500_i2c2_groups), },
--
2.7.4
next prev parent reply other threads:[~2019-11-23 18:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-23 18:30 Fix bugs in X1000/X1500 and add X1830 pinctrl driver v4 Zhou Yanjie
2019-11-23 18:30 ` Zhou Yanjie [this message]
2019-11-23 18:30 ` [PATCH RESEND v4 2/4] pinctrl: Ingenic: Add missing parts for X1000 and X1500 Zhou Yanjie
2019-11-23 18:30 ` [PATCH RESEND v4 3/4] dt-bindings: pinctrl: Add bindings for Ingenic X1830 Zhou Yanjie
2019-11-23 18:30 ` [PATCH RESEND v4 4/4] pinctrl: Ingenic: Add pinctrl driver for X1830 Zhou Yanjie
2019-11-25 1:35 ` kbuild test robot
2019-11-28 9:20 ` Fix bugs in X1000/X1500 and add X1830 pinctrl driver v4 Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1574533806-112333-2-git-send-email-zhouyanjie@zoho.com \
--to=zhouyanjie@zoho.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=paul.burton@mips.com \
--cc=paul@crapouillou.net \
--cc=paulburton@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).