[v3,2/7] dt-bindings: PCI: Add bindings for brcmstb's PCIe device
diff mbox series

Message ID 20191126091946.7970-3-nsaenzjulienne@suse.de
State Superseded
Headers show
Series
  • Raspberry Pi 4 PCIe support
Related show

Commit Message

Nicolas Saenz Julienne Nov. 26, 2019, 9:19 a.m. UTC
From: Jim Quinlan <james.quinlan@broadcom.com>

The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes since v2:
  - Add pci reference schema
  - Drop all default properties
  - Assume msi-controller and msi-parent are properly defined
  - Add num entries on multiple properties
  - use unevaluatedProperties
  - Update required properties
  - Fix license

Changes since v1:
  - Fix commit Subject
  - Remove linux,pci-domain

This was based on Jim's original submission[1], converted to yaml and
adapted to the RPi4 case.

[1] https://patchwork.kernel.org/patch/10605937/

 .../bindings/pci/brcm,stb-pcie.yaml           | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

Comments

Rob Herring Dec. 2, 2019, 4:39 p.m. UTC | #1
On Tue, Nov 26, 2019 at 3:20 AM Nicolas Saenz Julienne
<nsaenzjulienne@suse.de> wrote:
>
> From: Jim Quinlan <james.quinlan@broadcom.com>
>
> The DT bindings description of the brcmstb PCIe device is described.
> This node can only be used for now on the Raspberry Pi 4.
>
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>
> ---
>
> Changes since v2:
>   - Add pci reference schema
>   - Drop all default properties
>   - Assume msi-controller and msi-parent are properly defined
>   - Add num entries on multiple properties
>   - use unevaluatedProperties
>   - Update required properties
>   - Fix license
>
> Changes since v1:
>   - Fix commit Subject
>   - Remove linux,pci-domain
>
> This was based on Jim's original submission[1], converted to yaml and
> adapted to the RPi4 case.
>
> [1] https://patchwork.kernel.org/patch/10605937/
>
>  .../bindings/pci/brcm,stb-pcie.yaml           | 97 +++++++++++++++++++
>  1 file changed, 97 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

Reviewed-by: Rob Herring <robh@kernel.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 000000000000..77d3e81a437b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,97 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+required:
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    brcm,enable-ssc;
+            };
+    };