linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bibby Hsieh <bibby.hsieh@mediatek.com>
To: David Airlie <airlied@linux.ie>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	<dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
	YT Shen <yt.shen@mediatek.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	CK Hu <ck.hu@mediatek.com>,
	<linux-arm-kernel@lists.infradead.org>, <tfiga@chromium.org>,
	<drinkcat@chromium.org>, <linux-kernel@vger.kernel.org>,
	<srv_heupstream@mediatek.com>,
	Bibby Hsieh <bibby.hsieh@mediatek.com>,
	Yongqiang Niu <yongqiang.niu@mediatek.com>
Subject: [PATCH v1 6/6] drm/mediatek: apply CMDQ control flow
Date: Thu, 28 Nov 2019 10:42:38 +0800	[thread overview]
Message-ID: <20191128024238.9399-7-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20191128024238.9399-1-bibby.hsieh@mediatek.com>

Unlike other SoCs, MT8183 does not have "shadow"
registers for performaing an atomic video mode
set or page flip at vblank/vsync.

The CMDQ (Commend Queue) in MT8183 is used to help
update all relevant display controller registers
with critical time limation.

Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 86 ++++++++++++++++++++-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 31 ++++++++
 2 files changed, 113 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index fcf4e755e0bd..1b4e537ac3c1 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -12,6 +12,8 @@
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_vblank.h>
+#include <linux/of_address.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
 
 #include "mtk_drm_drv.h"
 #include "mtk_drm_crtc.h"
@@ -42,6 +44,9 @@ struct mtk_drm_crtc {
 	unsigned int			layer_nr;
 	bool				pending_planes;
 
+	struct cmdq_client		*cmdq_client;
+	u32				cmdq_event;
+
 	void __iomem			*config_regs;
 	const struct mtk_mmsys_reg_data *mmsys_reg_data;
 	struct mtk_disp_mutex		*mutex;
@@ -56,6 +61,11 @@ struct mtk_crtc_state {
 	unsigned int			pending_width;
 	unsigned int			pending_height;
 	unsigned int			pending_vrefresh;
+	struct cmdq_pkt			*cmdq_handle;
+};
+
+struct mtk_cmdq_cb_data {
+	struct cmdq_pkt			*cmdq_handle;
 };
 
 static inline struct mtk_drm_crtc *to_mtk_crtc(struct drm_crtc *c)
@@ -229,6 +239,46 @@ struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc,
 	return NULL;
 }
 
+#ifdef CONFIG_MTK_CMDQ
+static void ddp_cmdq_cb(struct cmdq_cb_data data)
+{
+	struct mtk_cmdq_cb_data *cb_data = data.data;
+
+	cmdq_pkt_destroy(cb_data->cmdq_handle);
+	kfree(cb_data);
+}
+
+static void mtk_cmdq_acquire(struct drm_crtc *crtc)
+{
+	struct mtk_crtc_state *mtk_crtc_state =
+			to_mtk_crtc_state(crtc->state);
+	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
+
+	mtk_crtc_state->cmdq_handle =
+			cmdq_pkt_create(mtk_crtc->cmdq_client,
+					PAGE_SIZE);
+	cmdq_pkt_clear_event(mtk_crtc_state->cmdq_handle,
+			     mtk_crtc->cmdq_event);
+	cmdq_pkt_wfe(mtk_crtc_state->cmdq_handle, mtk_crtc->cmdq_event);
+}
+
+static void mtk_cmdq_release(struct drm_crtc *crtc)
+{
+	struct mtk_crtc_state *mtk_crtc_state =
+			to_mtk_crtc_state(crtc->state);
+	struct mtk_cmdq_cb_data *cb_data;
+
+	cb_data = kmalloc(sizeof(*cb_data), GFP_KERNEL);
+	if (!cb_data) {
+		DRM_DEV_ERROR(crtc->dev->dev, "Failed to alloc cb_data\n");
+		return;
+	}
+
+	cb_data->cmdq_handle = mtk_crtc_state->cmdq_handle;
+	cmdq_pkt_flush_async(mtk_crtc_state->cmdq_handle,
+			     ddp_cmdq_cb, cb_data);
+}
+#endif
 static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 {
 	struct drm_crtc *crtc = &mtk_crtc->base;
@@ -383,7 +433,8 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 	if (state->pending_config) {
 		mtk_ddp_comp_config(comp, state->pending_width,
 				    state->pending_height,
-				    state->pending_vrefresh, 0, NULL);
+				    state->pending_vrefresh, 0,
+				    state->cmdq_handle);
 
 		state->pending_config = false;
 	}
@@ -403,7 +454,8 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
 
 			if (comp)
 				mtk_ddp_comp_layer_config(comp, local_layer,
-							  plane_state, NULL);
+							  plane_state,
+							  state->cmdq_handle);
 			plane_state->pending.config = false;
 		}
 		mtk_crtc->pending_planes = false;
@@ -454,6 +506,13 @@ void mtk_drm_crtc_cursor_update(struct drm_crtc *crtc, struct drm_plane *plane,
 		mtk_crtc_ddp_config(crtc);
 		mtk_disp_mutex_release(mtk_crtc->mutex);
 	}
+#ifdef CONFIG_MTK_CMDQ
+	if (mtk_crtc->cmdq_client) {
+		mtk_cmdq_acquire(crtc);
+		mtk_crtc_ddp_config(crtc);
+		mtk_cmdq_release(crtc);
+	}
+#endif
 	mutex_unlock(&priv->hw_lock);
 }
 
@@ -570,6 +629,13 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
 		mtk_crtc_ddp_config(crtc);
 		mtk_disp_mutex_release(mtk_crtc->mutex);
 	}
+#ifdef CONFIG_MTK_CMDQ
+	if (mtk_crtc->cmdq_client) {
+		mtk_cmdq_acquire(crtc);
+		mtk_crtc_ddp_config(crtc);
+		mtk_cmdq_release(crtc);
+	}
+#endif
 }
 
 static const struct drm_crtc_funcs mtk_crtc_funcs = {
@@ -619,7 +685,7 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp)
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
 	struct mtk_drm_private *priv = crtc->dev->dev_private;
 
-	if (!priv->data->shadow_register)
+	if (!priv->data->shadow_register && !mtk_crtc->cmdq_client)
 		mtk_crtc_ddp_config(crtc);
 
 	mtk_drm_finish_page_flip(mtk_crtc);
@@ -761,6 +827,18 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 	drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
 	drm_crtc_enable_color_mgmt(&mtk_crtc->base, 0, false, MTK_LUT_SIZE);
 	priv->num_pipes++;
-
+#ifdef CONFIG_MTK_CMDQ
+	mtk_crtc->cmdq_client =
+			cmdq_mbox_create(dev, drm_crtc_index(&mtk_crtc->base),
+					 2000);
+	of_property_read_u32_index(dev->of_node, "mediatek,gce-events",
+				   drm_crtc_index(&mtk_crtc->base),
+				   &mtk_crtc->cmdq_event);
+	if (IS_ERR(mtk_crtc->cmdq_client)) {
+		dev_dbg(dev, "mtk_crtc %d failed to create mailbox client, writing register by CPU now\n",
+			drm_crtc_index(&mtk_crtc->base));
+		mtk_crtc->cmdq_client = NULL;
+	}
+#endif
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 6d0f349ddf82..9cc12af2bc06 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -370,6 +370,9 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
 		      const struct mtk_ddp_comp_funcs *funcs)
 {
 	struct platform_device *comp_pdev;
+	struct resource res;
+	struct cmdq_client_reg *cmdq_reg;
+	int ret = 0;
 
 	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
 		return -EINVAL;
@@ -404,6 +407,34 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
 	}
 	comp->dev = &comp_pdev->dev;
 
+#ifdef CONFIG_MTK_CMDQ
+	if (of_address_to_resource(node, 0, &res) != 0) {
+		dev_err(dev, "Missing reg in %s node\n",
+			node->full_name);
+		return -EINVAL;
+	}
+	comp->regs_pa = res.start;
+
+	comp_pdev = of_find_device_by_node(node);
+	if (!comp_pdev) {
+		dev_warn(dev, "Waiting for component device %s\n",
+			 node->full_name);
+		return -EPROBE_DEFER;
+	}
+
+	cmdq_reg = kzalloc(sizeof(*cmdq_reg), GFP_KERNEL);
+	if (!cmdq_reg)
+		return -EINVAL;
+
+	ret = cmdq_dev_get_client_reg(&comp_pdev->dev, cmdq_reg, 0);
+	if (ret != 0)
+		dev_dbg(&comp_pdev->dev,
+			"get mediatek,gce-client-reg fail!\n");
+	else
+		comp->subsys = cmdq_reg->subsys;
+
+	kfree(cmdq_reg);
+#endif
 	return 0;
 }
 
-- 
2.18.0

  parent reply	other threads:[~2019-11-28  2:42 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-28  2:42 [PATCH v1 0/6] drm/mediatek: fix cursor issue and apply CMDQ in Bibby Hsieh
2019-11-28  2:42 ` [PATCH v1 1/6] drm/mediatek: put "event" in critical section Bibby Hsieh
2019-11-28  2:42 ` [PATCH v1 2/6] drm/mediatek: use DRM core's atomic commit helper Bibby Hsieh
2019-12-02  6:07   ` CK Hu
2019-11-28  2:42 ` [PATCH v1 3/6] drm/mediatek: handle events when enabling/disabling crtc Bibby Hsieh
2019-12-02  6:43   ` CK Hu
2019-11-28  2:42 ` [PATCH v1 4/6] drm/mediatek: update cursors by using async atomic update Bibby Hsieh
2019-12-02  9:51   ` CK Hu
2019-11-28  2:42 ` [PATCH v1 5/6] drm/mediatek: support CMDQ interface in ddp component Bibby Hsieh
2019-12-03  2:56   ` CK Hu
2019-12-03  3:34     ` CK Hu
2019-11-28  2:42 ` Bibby Hsieh [this message]
2019-12-03  1:38   ` [PATCH v1 6/6] drm/mediatek: apply CMDQ control flow CK Hu
2019-12-03  5:58     ` Bibby Hsieh
2019-12-03  6:17       ` CK Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191128024238.9399-7-bibby.hsieh@mediatek.com \
    --to=bibby.hsieh@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=ck.hu@mediatek.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=drinkcat@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@chromium.org \
    --cc=thierry.reding@gmail.com \
    --cc=yongqiang.niu@mediatek.com \
    --cc=yt.shen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).