From: shiva.linuxworks@gmail.com
To: miquel.raynal@bootlin.com, richard@nod.at,
frieder.schrempf@kontron.de, bbrezillon@kernel.org,
linux-mtd@lists.infradead.org
Cc: dwmw2@infradead.org, computersforpeace@gmail.com,
marek.vasut@gmail.com, vigneshr@ti.com,
linux-kernel@vger.kernel.org,
Shivamurthy Shastri <sshivamurthy@micron.com>
Subject: [PATCH 1/1] mtd: spinand: Add support for new Micron SPI NAND devices
Date: Mon, 9 Dec 2019 07:42:23 +0100 [thread overview]
Message-ID: <20191209064223.10003-2-sshivamurthy@micron.com> (raw)
In-Reply-To: <20191209064223.10003-1-sshivamurthy@micron.com>
From: Shivamurthy Shastri <sshivamurthy@micron.com>
Add device table for new Micron SPI NAND devices. While at it, add
support to the multi-die selection. Also, generalize the OOB layout
structure and function names.
Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
---
drivers/mtd/nand/spi/micron.c | 135 ++++++++++++++++++++++++++++++----
1 file changed, 121 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 7d7b1f7fcf71..bce5da21d96c 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -34,38 +34,38 @@ static SPINAND_OP_VARIANTS(update_cache_variants,
SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
SPINAND_PROG_LOAD(false, 0, NULL, 0));
-static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *region)
+static int micron_8_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
{
if (section)
return -ERANGE;
- region->offset = 64;
- region->length = 64;
+ region->offset = mtd->oobsize / 2;
+ region->length = mtd->oobsize / 2;
return 0;
}
-static int mt29f2g01abagd_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *region)
+static int micron_8_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
{
if (section)
return -ERANGE;
/* Reserve 2 bytes for the BBM. */
region->offset = 2;
- region->length = 62;
+ region->length = (mtd->oobsize / 2) - 2;
return 0;
}
-static const struct mtd_ooblayout_ops mt29f2g01abagd_ooblayout = {
- .ecc = mt29f2g01abagd_ooblayout_ecc,
- .free = mt29f2g01abagd_ooblayout_free,
+static const struct mtd_ooblayout_ops micron_8_ooblayout = {
+ .ecc = micron_8_ooblayout_ecc,
+ .free = micron_8_ooblayout_free,
};
-static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
- u8 status)
+static int micron_8_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
{
switch (status & MICRON_STATUS_ECC_MASK) {
case STATUS_ECC_NO_BITFLIPS:
@@ -90,7 +90,20 @@ static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
+static int micron_select_target(struct spinand_device *spinand,
+ unsigned int target)
+{
+ struct spi_mem_op op = SPINAND_SET_FEATURE_OP(0xd0,
+ spinand->scratchbuf);
+
+ if (target == 1)
+ *spinand->scratchbuf = 0x40;
+
+ return spi_mem_exec_op(spinand->spimem, &op);
+}
+
static const struct spinand_info micron_spinand_table[] = {
+ /* M79A 2Gb 3.3V */
SPINAND_INFO("MT29F2G01ABAGD", 0x24,
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
NAND_ECCREQ(8, 512),
@@ -98,8 +111,91 @@ static const struct spinand_info micron_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
- mt29f2g01abagd_ecc_get_status)),
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status)),
+ /* M79A 2Gb 1.8V */
+ SPINAND_INFO("MT29F2G01ABBGD", 0x25,
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status)),
+ /* M78A 1Gb 3.3V */
+ SPINAND_INFO("MT29F1G01ABAFD", 0x14,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status)),
+ /* M78A 1Gb 1.8V */
+ SPINAND_INFO("MT29F1G01ABAFD", 0x15,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status)),
+ /* M79A 4Gb 3.3V */
+ SPINAND_INFO("MT29F4G01ADAGD", 0x36,
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 80, 2, 1, 2),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status),
+ SPINAND_SELECT_TARGET(micron_select_target)),
+ /* M70A 4Gb 3.3V */
+ SPINAND_INFO("MT29F4G01ABAFD", 0x34,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status)),
+ /* M70A 4Gb 1.8V */
+ SPINAND_INFO("MT29F4G01ABBFD", 0x35,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status)),
+ /* M70A 8Gb 3.3V */
+ SPINAND_INFO("MT29F8G01ADAFD", 0x46,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status),
+ SPINAND_SELECT_TARGET(micron_select_target)),
+ /* M70A 8Gb 1.8V */
+ SPINAND_INFO("MT29F8G01ADBFD", 0x47,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status),
+ SPINAND_SELECT_TARGET(micron_select_target)),
};
static int micron_spinand_detect(struct spinand_device *spinand)
@@ -122,8 +218,19 @@ static int micron_spinand_detect(struct spinand_device *spinand)
return 1;
}
+static int micron_spinand_init(struct spinand_device *spinand)
+{
+ /*
+ * M70A series device enables Continuos Read feature on Power-up,
+ * which is not supported here. Making this BIT disable will avoid
+ * any possible failure.
+ */
+ return spinand_upd_cfg(spinand, CFG_QUAD_ENABLE, 0);
+}
+
static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
.detect = micron_spinand_detect,
+ .init = micron_spinand_init,
};
const struct spinand_manufacturer micron_spinand_manufacturer = {
--
2.17.1
next prev parent reply other threads:[~2019-12-09 6:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-09 6:42 [PATCH 0/1] Add new series Micron SPI NAND devices shiva.linuxworks
2019-12-09 6:42 ` shiva.linuxworks [this message]
2020-01-09 15:48 ` [PATCH 1/1] mtd: spinand: Add support for new " Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191209064223.10003-2-sshivamurthy@micron.com \
--to=shiva.linuxworks@gmail.com \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=frieder.schrempf@kontron.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=sshivamurthy@micron.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).