From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, paul.burton@mips.com, paulburton@kernel.org,
jhogan@kernel.org, mripard@kernel.org, shawnguo@kernel.org,
mark.rutland@arm.com, ebiederm@xmission.com, ralf@linux-mips.org,
heiko@sntech.de, icenowy@aosc.io,
laurent.pinchart@ideasonboard.com, krzk@kernel.org,
geert+renesas@glider.be, paul@crapouillou.net,
prasannatsmkumar@gmail.com, sernia.zhou@foxmail.com,
zhenwenjin@gmail.com, 772753199@qq.com
Subject: [PATCH v7 5/6] MIPS: X1000: Add missing X1000 nodes.
Date: Mon, 9 Dec 2019 21:00:37 +0800 [thread overview]
Message-ID: <1575896438-9562-6-git-send-email-zhouyanjie@wanyeetech.com> (raw)
In-Reply-To: <1575896438-9562-1-git-send-email-zhouyanjie@wanyeetech.com>
Add the appropriate DT node to probe pdma/msc/rtc/watchdog/ethernet
driver using the devicetree.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---
Notes:
v7:
New patch, merge[05/12],[07/12],[09/12],[11/12] in v6.
arch/mips/boot/dts/ingenic/x1000.dtsi | 96 +++++++++++++++++++++++++++++++++++
1 file changed, 96 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 13a6c9ff..398a756 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>
/ {
#address-cells = <1>;
@@ -68,6 +69,25 @@
interrupts = <27 26 25>;
};
+ wdt: watchdog@10002000 {
+ compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+ reg = <0x10002000 0x10>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
pinctrl: pin-controller@10010000 {
compatible = "ingenic,x1000-pinctrl";
reg = <0x10010000 0x800>;
@@ -173,4 +193,80 @@
status = "disabled";
};
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1000-dma";
+ reg = <0x13420000 0x400
+ 0x13421000 0x40>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1000_CLK_PDMA>;
+ };
+
+ mac: mac@134b0000 {
+ compatible = "ingenic,x1000-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1000_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ msc0: msc@13450000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu X1000_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ msc1: msc@13460000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu X1000_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
};
--
2.7.4
next prev parent reply other threads:[~2019-12-09 13:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-09 13:00 Add initial support for Ingenic X1000 SoC and Y&A CU Neo board v7 周琰杰 (Zhou Yanjie)
2019-12-09 13:00 ` [PATCH v7 1/6] MIPS: Ingenic: Initial X1000 support 周琰杰 (Zhou Yanjie)
2019-12-09 13:00 ` [PATCH v7 2/6] dt-bindings: Document yna vendor-prefix 周琰杰 (Zhou Yanjie)
2019-12-09 13:00 ` [PATCH v7 3/6] dt-bindings: MIPS: Add Ingenic XBurst based boards 周琰杰 (Zhou Yanjie)
2019-12-09 13:00 ` [PATCH v7 4/6] MIPS: Ingenic: Initial YSH & ATIL CU Neo board support 周琰杰 (Zhou Yanjie)
2019-12-09 13:00 ` 周琰杰 (Zhou Yanjie) [this message]
2019-12-09 15:15 ` [PATCH v7 5/6] MIPS: X1000: Add missing X1000 nodes Paul Cercueil
2019-12-10 1:27 ` zhouyanjie
2019-12-09 13:00 ` [PATCH v7 6/6] MIPS: CU1000: Add devicetree & config with PDMA/MSC/RTC/WDT/NET enabled 周琰杰 (Zhou Yanjie)
2019-12-09 15:07 ` Paul Cercueil
2019-12-10 1:30 ` zhouyanjie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1575896438-9562-6-git-send-email-zhouyanjie@wanyeetech.com \
--to=zhouyanjie@wanyeetech.com \
--cc=772753199@qq.com \
--cc=devicetree@vger.kernel.org \
--cc=ebiederm@xmission.com \
--cc=geert+renesas@glider.be \
--cc=heiko@sntech.de \
--cc=icenowy@aosc.io \
--cc=jhogan@kernel.org \
--cc=krzk@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mripard@kernel.org \
--cc=paul.burton@mips.com \
--cc=paul@crapouillou.net \
--cc=paulburton@kernel.org \
--cc=prasannatsmkumar@gmail.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=sernia.zhou@foxmail.com \
--cc=shawnguo@kernel.org \
--cc=zhenwenjin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).