linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: linux-input@vger.kernel.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	linux-kernel@vger.kernel.org, Dmitry Osipenko <digetx@gmail.com>
Subject: [PATCH 2/6] input: elants: support old touch report format
Date: Tue, 10 Dec 2019 01:19:17 +0100	[thread overview]
Message-ID: <7a8ff01ae0952d026a7da307a69e4540055e370a.1575936961.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1575936961.git.mirq-linux@rere.qmqm.pl>

Support ELAN touchpad sensor with older firmware as found on eg. Asus
Transformer Pads.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
 drivers/input/touchscreen/elants_i2c.c | 36 ++++++++++++++++++--------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 887888c53996..eadd26d5a06f 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -65,6 +65,7 @@
 #define CMD_HEADER_REK		0x66
 
 /* FW position data */
+#define PACKET_SIZE_OLD		40
 #define PACKET_SIZE		55
 #define MAX_CONTACT_NUM		10
 #define FW_POS_HEADER		0
@@ -792,7 +793,8 @@ static int elants_i2c_fw_update(struct elants_data *ts)
  * Event reporting.
  */
 
-static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
+static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf,
+				size_t report_len)
 {
 	struct input_dev *input = ts->input;
 	unsigned int n_fingers;
@@ -804,7 +806,8 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
 			buf[FW_POS_STATE];
 
 	dev_dbg(&ts->client->dev,
-		"n_fingers: %u, state: %04x\n",  n_fingers, finger_state);
+		"n_fingers: %u, state: %04x, report_len: %zu\n",
+		n_fingers, finger_state, report_len);
 
 	for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
 		if (finger_state & 1) {
@@ -814,8 +817,16 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
 			pos = &buf[FW_POS_XY + i * 3];
 			x = (((u16)pos[0] & 0xf0) << 4) | pos[1];
 			y = (((u16)pos[0] & 0x0f) << 8) | pos[2];
-			p = buf[FW_POS_PRESSURE + i];
-			w = buf[FW_POS_WIDTH + i];
+			if (report_len == PACKET_SIZE_OLD) {
+				w = buf[FW_POS_WIDTH + i / 2];
+				w >>= 4 * (~i & 1);	// little-endian-nibbles
+				w |= w << 4;
+				w |= !w;
+				p = w;
+			} else {
+				p = buf[FW_POS_PRESSURE + i];
+				w = buf[FW_POS_WIDTH + i];
+			}
 
 			dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n",
 				i, x, y, p, w);
@@ -848,7 +859,8 @@ static u8 elants_i2c_calculate_checksum(u8 *buf)
 	return checksum;
 }
 
-static void elants_i2c_event(struct elants_data *ts, u8 *buf)
+static void elants_i2c_event(struct elants_data *ts, u8 *buf,
+			     size_t report_len)
 {
 	u8 checksum = elants_i2c_calculate_checksum(buf);
 
@@ -862,7 +874,7 @@ static void elants_i2c_event(struct elants_data *ts, u8 *buf)
 			 "%s: unknown packet type: %02x\n",
 			 __func__, buf[FW_POS_HEADER]);
 	else
-		elants_i2c_mt_event(ts, buf);
+		elants_i2c_mt_event(ts, buf, report_len);
 }
 
 static irqreturn_t elants_i2c_irq(int irq, void *_dev)
@@ -920,7 +932,8 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
 			break;
 
 		case QUEUE_HEADER_SINGLE:
-			elants_i2c_event(ts, &ts->buf[HEADER_SIZE]);
+			elants_i2c_event(ts, &ts->buf[HEADER_SIZE],
+					 ts->buf[FW_HDR_LENGTH]);
 			break;
 
 		case QUEUE_HEADER_NORMAL:
@@ -933,17 +946,18 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
 			}
 
 			report_len = ts->buf[FW_HDR_LENGTH] / report_count;
-			if (report_len != PACKET_SIZE) {
+			if (report_len != PACKET_SIZE &&
+			    report_len != PACKET_SIZE_OLD) {
 				dev_err(&client->dev,
-					"mismatching report length: %*ph\n",
+					"unsupported report length: %*ph\n",
 					HEADER_SIZE, ts->buf);
 				break;
 			}
 
 			for (i = 0; i < report_count; i++) {
 				u8 *buf = ts->buf + HEADER_SIZE +
-							i * PACKET_SIZE;
-				elants_i2c_event(ts, buf);
+					  i * report_len;
+				elants_i2c_event(ts, buf, report_len);
 			}
 			break;
 
-- 
2.20.1


  reply	other threads:[~2019-12-10  0:19 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10  0:19 [PATCH 0/6] input: elants: Support Asus TF300T touchscreen Michał Mirosław
2019-12-10  0:19 ` Michał Mirosław [this message]
2019-12-10  0:19 ` [PATCH 3/6] input: elants: support common touchscreen DT properties Michał Mirosław
2019-12-10  1:03   ` Dmitry Osipenko
2019-12-10  1:07     ` Dmitry Osipenko
2019-12-10  2:38     ` Michał Mirosław
2019-12-10 15:21       ` Dmitry Osipenko
2019-12-11  3:28         ` Michał Mirosław
2019-12-11 15:26           ` Dmitry Osipenko
2019-12-10  0:19 ` [PATCH 1/6] input: elants: document some registers and values Michał Mirosław
2019-12-10  0:19 ` [PATCH 6/6] input: elants: read touchscreen size for EKTF3624 Michał Mirosław
2019-12-10  1:23   ` Dmitry Osipenko
2019-12-10  1:48     ` Dmitry Osipenko
2019-12-10 18:32   ` kbuild test robot
2019-12-10  0:19 ` [PATCH 5/6] input: elants: refactor elants_i2c_execute_command() Michał Mirosław
2019-12-10  1:34   ` Dmitry Osipenko
2019-12-10  0:19 ` [PATCH 4/6] input: elants: detect max_x/y from hardware Michał Mirosław
2019-12-10  0:59 ` [PATCH 0/6] input: elants: Support Asus TF300T touchscreen Dmitry Osipenko
2019-12-10 15:26   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7a8ff01ae0952d026a7da307a69e4540055e370a.1575936961.git.mirq-linux@rere.qmqm.pl \
    --to=mirq-linux@rere.qmqm.pl \
    --cc=digetx@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).