From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: linux-input@vger.kernel.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-kernel@vger.kernel.org, Dmitry Osipenko <digetx@gmail.com>
Subject: [PATCH 1/6] input: elants: document some registers and values
Date: Tue, 10 Dec 2019 01:19:17 +0100 [thread overview]
Message-ID: <90aafcc8bac6335924df03610648418314a9dec6.1575936961.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1575936961.git.mirq-linux@rere.qmqm.pl>
Add information found in downstream kernels, to make the code less
magic.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
drivers/input/touchscreen/elants_i2c.c | 29 +++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index d4ad24ea54c8..887888c53996 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -77,7 +77,11 @@
#define HEADER_REPORT_10_FINGER 0x62
-/* Header (4 bytes) plus 3 fill 10-finger packets */
+/* Power state */
+#define PWR_STATE_DEEP_SLEEP 0
+#define PWR_STATE_NORMAL 1
+
+/* Header (4 bytes) plus 3 full 10-finger packets */
#define MAX_PACKET_SIZE 169
#define BOOT_TIME_DELAY_MS 50
@@ -87,10 +91,21 @@
#define E_ELAN_INFO_BC_VER 0x10
#define E_ELAN_INFO_TEST_VER 0xE0
#define E_ELAN_INFO_FW_ID 0xF0
+#define E_POWER_MODE 0x40
+#define E_POWER_STATE 0x50
+#define E_INFO_X_RES 0x60
+#define E_INFO_Y_RES 0x63
#define E_INFO_OSR 0xD6
#define E_INFO_PHY_SCAN 0xD7
#define E_INFO_PHY_DRIVER 0xD8
+/* FW write command, 0x54 0x?? 0x0, 0x01 */
+#define E_POWER_MODE_BATTERY 0x40
+#define E_POWER_MODE_AC 0x41
+#define E_POWER_MODE_USB 0x42
+#define E_POWER_STATE_SLEEP 0x50
+#define E_POWER_STATE_RESUME 0x58
+
#define MAX_RETRIES 3
#define MAX_FW_UPDATE_RETRIES 30
@@ -231,8 +246,8 @@ static int elants_i2c_calibrate(struct elants_data *ts)
{
struct i2c_client *client = ts->client;
int ret, error;
- static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
- static const u8 rek[] = { 0x54, 0x29, 0x00, 0x01 };
+ static const u8 w_flashkey[] = { CMD_HEADER_WRITE, 0xC0, 0xE1, 0x5A };
+ static const u8 rek[] = { CMD_HEADER_WRITE, 0x29, 0x00, 0x01 };
static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 };
disable_irq(client->irq);
@@ -1295,7 +1310,9 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct elants_data *ts = i2c_get_clientdata(client);
- const u8 set_sleep_cmd[] = { 0x54, 0x50, 0x00, 0x01 };
+ const u8 set_sleep_cmd[] = {
+ CMD_HEADER_WRITE, E_POWER_STATE_SLEEP, 0x00, 0x01
+ };
int retry_cnt;
int error;
@@ -1332,7 +1349,9 @@ static int __maybe_unused elants_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct elants_data *ts = i2c_get_clientdata(client);
- const u8 set_active_cmd[] = { 0x54, 0x58, 0x00, 0x01 };
+ const u8 set_active_cmd[] = {
+ CMD_HEADER_WRITE, E_POWER_STATE_RESUME, 0x00, 0x01
+ };
int retry_cnt;
int error;
--
2.20.1
next prev parent reply other threads:[~2019-12-10 0:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-10 0:19 [PATCH 0/6] input: elants: Support Asus TF300T touchscreen Michał Mirosław
2019-12-10 0:19 ` [PATCH 2/6] input: elants: support old touch report format Michał Mirosław
2019-12-10 0:19 ` [PATCH 3/6] input: elants: support common touchscreen DT properties Michał Mirosław
2019-12-10 1:03 ` Dmitry Osipenko
2019-12-10 1:07 ` Dmitry Osipenko
2019-12-10 2:38 ` Michał Mirosław
2019-12-10 15:21 ` Dmitry Osipenko
2019-12-11 3:28 ` Michał Mirosław
2019-12-11 15:26 ` Dmitry Osipenko
2019-12-10 0:19 ` Michał Mirosław [this message]
2019-12-10 0:19 ` [PATCH 6/6] input: elants: read touchscreen size for EKTF3624 Michał Mirosław
2019-12-10 1:23 ` Dmitry Osipenko
2019-12-10 1:48 ` Dmitry Osipenko
2019-12-10 18:32 ` kbuild test robot
2019-12-10 0:19 ` [PATCH 5/6] input: elants: refactor elants_i2c_execute_command() Michał Mirosław
2019-12-10 1:34 ` Dmitry Osipenko
2019-12-10 0:19 ` [PATCH 4/6] input: elants: detect max_x/y from hardware Michał Mirosław
2019-12-10 0:59 ` [PATCH 0/6] input: elants: Support Asus TF300T touchscreen Dmitry Osipenko
2019-12-10 15:26 ` Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=90aafcc8bac6335924df03610648418314a9dec6.1575936961.git.mirq-linux@rere.qmqm.pl \
--to=mirq-linux@rere.qmqm.pl \
--cc=digetx@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).