From: Bibby Hsieh <bibby.hsieh@mediatek.com>
To: David Airlie <airlied@linux.ie>,
Matthias Brugger <matthias.bgg@gmail.com>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
<dri-devel@lists.freedesktop.org>,
<linux-mediatek@lists.infradead.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
YT Shen <yt.shen@mediatek.com>,
Thierry Reding <thierry.reding@gmail.com>,
CK Hu <ck.hu@mediatek.com>,
<linux-arm-kernel@lists.infradead.org>, <tfiga@chromium.org>,
<drinkcat@chromium.org>, <linux-kernel@vger.kernel.org>,
<srv_heupstream@mediatek.com>,
Bibby Hsieh <bibby.hsieh@mediatek.com>,
Yongqiang Niu <yongqiang.niu@mediatek.com>
Subject: [PATCH v5 7/7] drm/mediatek: apply CMDQ control flow
Date: Tue, 10 Dec 2019 13:05:26 +0800 [thread overview]
Message-ID: <20191210050526.4437-8-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20191210050526.4437-1-bibby.hsieh@mediatek.com>
Unlike other SoCs, MT8183 does not have "shadow"
registers for performaing an atomic video mode
set or page flip at vblank/vsync.
The CMDQ (Commend Queue) in MT8183 is used to help
update all relevant display controller registers
with critical time limation.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 56 +++++++++++++++++++++----
1 file changed, 49 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 5b3e24a7ef6c..ca4fc4735f9a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -12,6 +12,8 @@
#include <drm/drm_plane_helper.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_vblank.h>
+#include <linux/of_address.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
#include "mtk_drm_drv.h"
#include "mtk_drm_crtc.h"
@@ -43,6 +45,9 @@ struct mtk_drm_crtc {
bool pending_planes;
bool pending_async_planes;
+ struct cmdq_client *cmdq_client;
+ u32 cmdq_event;
+
void __iomem *config_regs;
const struct mtk_mmsys_reg_data *mmsys_reg_data;
struct mtk_disp_mutex *mutex;
@@ -234,6 +239,13 @@ struct mtk_ddp_comp *mtk_drm_ddp_comp_for_plane(struct drm_crtc *crtc,
return NULL;
}
+#if IS_ENABLED(CONFIG_MTK_CMDQ)
+static void ddp_cmdq_cb(struct cmdq_cb_data data)
+{
+ cmdq_pkt_destroy(data.data);
+}
+#endif
+
static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
{
struct drm_crtc *crtc = &mtk_crtc->base;
@@ -375,7 +387,8 @@ static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc)
}
}
-static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
+static void mtk_crtc_ddp_config(struct drm_crtc *crtc,
+ struct cmdq_pkt *cmdq_handle)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
@@ -391,7 +404,8 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
if (state->pending_config) {
mtk_ddp_comp_config(comp, state->pending_width,
state->pending_height,
- state->pending_vrefresh, 0, NULL);
+ state->pending_vrefresh, 0,
+ cmdq_handle);
state->pending_config = false;
}
@@ -411,7 +425,8 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
if (comp)
mtk_ddp_comp_layer_config(comp, local_layer,
- plane_state, NULL);
+ plane_state,
+ cmdq_handle);
plane_state->pending.config = false;
}
mtk_crtc->pending_planes = false;
@@ -432,7 +447,8 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
if (comp)
mtk_ddp_comp_layer_config(comp, local_layer,
- plane_state, NULL);
+ plane_state,
+ cmdq_handle);
plane_state->pending.async_config = false;
}
mtk_crtc->pending_async_planes = false;
@@ -441,6 +457,7 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
{
+ struct cmdq_pkt *cmdq_handle;
struct drm_crtc *crtc = &mtk_crtc->base;
struct mtk_drm_private *priv = crtc->dev->dev_private;
unsigned int pending_planes = 0, pending_async_planes = 0;
@@ -469,9 +486,18 @@ static void mtk_drm_crtc_hw_config(struct mtk_drm_crtc *mtk_crtc)
if (priv->data->shadow_register) {
mtk_disp_mutex_acquire(mtk_crtc->mutex);
- mtk_crtc_ddp_config(crtc);
+ mtk_crtc_ddp_config(crtc, NULL);
mtk_disp_mutex_release(mtk_crtc->mutex);
}
+#if IS_ENABLED(CONFIG_MTK_CMDQ)
+ if (mtk_crtc->cmdq_client) {
+ cmdq_handle = cmdq_pkt_create(mtk_crtc->cmdq_client, PAGE_SIZE);
+ cmdq_pkt_clear_event(cmdq_handle, mtk_crtc->cmdq_event);
+ cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event);
+ mtk_crtc_ddp_config(crtc, cmdq_handle);
+ cmdq_pkt_flush_async(cmdq_handle, ddp_cmdq_cb, cmdq_handle);
+ }
+#endif
mutex_unlock(&mtk_crtc->hw_lock);
}
@@ -640,8 +666,8 @@ void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *comp)
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
struct mtk_drm_private *priv = crtc->dev->dev_private;
- if (!priv->data->shadow_register)
- mtk_crtc_ddp_config(crtc);
+ if (!priv->data->shadow_register && !mtk_crtc->cmdq_client)
+ mtk_crtc_ddp_config(crtc, NULL);
mtk_drm_finish_page_flip(mtk_crtc);
}
@@ -784,5 +810,21 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
priv->num_pipes++;
mutex_init(&mtk_crtc->hw_lock);
+#if IS_ENABLED(CONFIG_MTK_CMDQ)
+ mtk_crtc->cmdq_client =
+ cmdq_mbox_create(dev, drm_crtc_index(&mtk_crtc->base),
+ 2000);
+ if (IS_ERR(mtk_crtc->cmdq_client)) {
+ dev_dbg(dev, "mtk_crtc %d failed to create mailbox client, writing register by CPU now\n",
+ drm_crtc_index(&mtk_crtc->base));
+ mtk_crtc->cmdq_client = NULL;
+ }
+ ret = of_property_read_u32_index(dev->of_node, "mediatek,gce-events",
+ drm_crtc_index(&mtk_crtc->base),
+ &mtk_crtc->cmdq_event);
+ if (ret)
+ dev_dbg(dev, "mtk_crtc %d failed to get mediatek,gce-events property\n",
+ drm_crtc_index(&mtk_crtc->base));
+#endif
return 0;
}
--
2.18.0
next prev parent reply other threads:[~2019-12-10 5:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-10 5:05 [PATCH v5 0/7] drm/mediatek: fix cursor issue and apply CMDQ in MTK DRM Bibby Hsieh
2019-12-10 5:05 ` [PATCH v5 1/7] drm/mediatek: use DRM core's atomic commit helper Bibby Hsieh
2019-12-10 5:05 ` [PATCH v5 2/7] drm/mediatek: handle events when enabling/disabling crtc Bibby Hsieh
2019-12-10 5:05 ` [PATCH v5 3/7] drm/mediatek: update cursors by using async atomic update Bibby Hsieh
2020-02-28 16:34 ` [BUG] " Frank Wunderlich
2019-12-10 5:05 ` [PATCH v5 4/7] drm/mediatek: disable all the planes in atomic_disable Bibby Hsieh
2019-12-10 5:05 ` [PATCH v5 5/7] drm/mediatek: remove unused external function Bibby Hsieh
2019-12-10 5:05 ` [PATCH v5 6/7] drm/mediatek: support CMDQ interface in ddp component Bibby Hsieh
2019-12-20 13:27 ` Hsin-Yi Wang
2019-12-23 8:59 ` CK Hu
2019-12-10 5:05 ` Bibby Hsieh [this message]
2019-12-20 8:28 ` [PATCH v5 0/7] drm/mediatek: fix cursor issue and apply CMDQ in MTK DRM CK Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191210050526.4437-8-bibby.hsieh@mediatek.com \
--to=bibby.hsieh@mediatek.com \
--cc=airlied@linux.ie \
--cc=ck.hu@mediatek.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=drinkcat@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
--cc=thierry.reding@gmail.com \
--cc=yongqiang.niu@mediatek.com \
--cc=yt.shen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).