linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Durrant <pdurrant@amazon.com>
To: <xen-devel@lists.xenproject.org>, <linux-kernel@vger.kernel.org>
Cc: "Paul Durrant" <pdurrant@amazon.com>,
	"Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>,
	"Jens Axboe" <axboe@kernel.dk>,
	"Boris Ostrovsky" <boris.ostrovsky@oracle.com>,
	"Juergen Gross" <jgross@suse.com>,
	"Stefano Stabellini" <sstabellini@kernel.org>
Subject: [PATCH v2 4/4] xen-blkback: support dynamic unbind/bind
Date: Tue, 10 Dec 2019 11:33:47 +0000	[thread overview]
Message-ID: <20191210113347.3404-5-pdurrant@amazon.com> (raw)
In-Reply-To: <20191210113347.3404-1-pdurrant@amazon.com>

By simply re-attaching to shared rings during connect_ring() rather than
assuming they are freshly allocated (i.e assuming the counters are zero)
it is possible for vbd instances to be unbound and re-bound from and to
(respectively) a running guest.

This has been tested by running:

while true;
  do fio --name=randwrite --ioengine=libaio --iodepth=16 \
  --rw=randwrite --bs=4k --direct=1 --size=1G --verify=crc32;
  done

in a PV guest whilst running:

while true;
  do echo vbd-$DOMID-$VBD >unbind;
  echo unbound;
  sleep 5;
  echo vbd-$DOMID-$VBD >bind;
  echo bound;
  sleep 3;
  done

in dom0 from /sys/bus/xen-backend/drivers/vbd to continuously unbind and
re-bind its system disk image.

This is a highly useful feature for a backend module as it allows it to be
unloaded and re-loaded (i.e. updated) without requiring domUs to be halted.
This was also tested by running:

while true;
  do echo vbd-$DOMID-$VBD >unbind;
  echo unbound;
  sleep 5;
  rmmod xen-blkback;
  echo unloaded;
  sleep 1;
  modprobe xen-blkback;
  echo bound;
  cd $(pwd);
  sleep 3;
  done

in dom0 whilst running the same loop as above in the (single) PV guest.

Some (less stressful) testing has also been done using a Windows HVM guest
with the latest 9.0 PV drivers installed.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
---
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>

v2:
 - Apply a sanity check to the value of rsp_prod and fail the re-attach
   if it is implausible
 - Set allow_rebind to prevent ring from being closed on unbind
 - Update test workload from dd to fio (with verification)
---
 drivers/block/xen-blkback/xenbus.c | 59 +++++++++++++++++++++---------
 1 file changed, 41 insertions(+), 18 deletions(-)

diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index e8c5c54e1d26..13d09630b237 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -181,6 +181,8 @@ static int xen_blkif_map(struct xen_blkif_ring *ring, grant_ref_t *gref,
 {
 	int err;
 	struct xen_blkif *blkif = ring->blkif;
+	struct blkif_common_sring *sring_common;
+	RING_IDX rsp_prod, req_prod;
 
 	/* Already connected through? */
 	if (ring->irq)
@@ -191,46 +193,66 @@ static int xen_blkif_map(struct xen_blkif_ring *ring, grant_ref_t *gref,
 	if (err < 0)
 		return err;
 
+	sring_common = (struct blkif_common_sring *)ring->blk_ring;
+	rsp_prod = READ_ONCE(sring_common->rsp_prod);
+	req_prod = READ_ONCE(sring_common->req_prod);
+
 	switch (blkif->blk_protocol) {
 	case BLKIF_PROTOCOL_NATIVE:
 	{
-		struct blkif_sring *sring;
-		sring = (struct blkif_sring *)ring->blk_ring;
-		BACK_RING_INIT(&ring->blk_rings.native, sring,
-			       XEN_PAGE_SIZE * nr_grefs);
+		struct blkif_sring *sring_native =
+			(struct blkif_sring *)ring->blk_ring;
+		unsigned int size = __RING_SIZE(sring_native,
+						XEN_PAGE_SIZE * nr_grefs);
+
+		BACK_RING_ATTACH(&ring->blk_rings.native, sring_native,
+				 rsp_prod, XEN_PAGE_SIZE * nr_grefs);
+		err = (req_prod - rsp_prod > size) ? -EIO : 0;
 		break;
 	}
 	case BLKIF_PROTOCOL_X86_32:
 	{
-		struct blkif_x86_32_sring *sring_x86_32;
-		sring_x86_32 = (struct blkif_x86_32_sring *)ring->blk_ring;
-		BACK_RING_INIT(&ring->blk_rings.x86_32, sring_x86_32,
-			       XEN_PAGE_SIZE * nr_grefs);
+		struct blkif_x86_32_sring *sring_x86_32 =
+			(struct blkif_x86_32_sring *)ring->blk_ring;
+		unsigned int size = __RING_SIZE(sring_x86_32,
+						XEN_PAGE_SIZE * nr_grefs);
+
+		BACK_RING_ATTACH(&ring->blk_rings.x86_32, sring_x86_32,
+				 rsp_prod, XEN_PAGE_SIZE * nr_grefs);
+		err = (req_prod - rsp_prod > size) ? -EIO : 0;
 		break;
 	}
 	case BLKIF_PROTOCOL_X86_64:
 	{
-		struct blkif_x86_64_sring *sring_x86_64;
-		sring_x86_64 = (struct blkif_x86_64_sring *)ring->blk_ring;
-		BACK_RING_INIT(&ring->blk_rings.x86_64, sring_x86_64,
-			       XEN_PAGE_SIZE * nr_grefs);
+		struct blkif_x86_64_sring *sring_x86_64 =
+			(struct blkif_x86_64_sring *)ring->blk_ring;
+		unsigned int size = __RING_SIZE(sring_x86_64,
+						XEN_PAGE_SIZE * nr_grefs);
+
+		BACK_RING_ATTACH(&ring->blk_rings.x86_64, sring_x86_64,
+				 rsp_prod, XEN_PAGE_SIZE * nr_grefs);
+		err = (req_prod - rsp_prod > size) ? -EIO : 0;
 		break;
 	}
 	default:
 		BUG();
 	}
+	if (err < 0)
+		goto fail;
 
 	err = bind_interdomain_evtchn_to_irqhandler(blkif->domid, evtchn,
 						    xen_blkif_be_int, 0,
 						    "blkif-backend", ring);
-	if (err < 0) {
-		xenbus_unmap_ring_vfree(blkif->be->dev, ring->blk_ring);
-		ring->blk_rings.common.sring = NULL;
-		return err;
-	}
+	if (err < 0)
+		goto fail;
 	ring->irq = err;
 
 	return 0;
+
+fail:
+	xenbus_unmap_ring_vfree(blkif->be->dev, ring->blk_ring);
+	ring->blk_rings.common.sring = NULL;
+	return err;
 }
 
 static int xen_blkif_disconnect(struct xen_blkif *blkif)
@@ -1121,7 +1143,8 @@ static struct xenbus_driver xen_blkbk_driver = {
 	.ids  = xen_blkbk_ids,
 	.probe = xen_blkbk_probe,
 	.remove = xen_blkbk_remove,
-	.otherend_changed = frontend_changed
+	.otherend_changed = frontend_changed,
+	.allow_rebind = true,
 };
 
 int xen_blkif_xenbus_init(void)
-- 
2.20.1


  parent reply	other threads:[~2019-12-10 11:34 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10 11:33 [PATCH v2 0/4] xen-blkback: support live update Paul Durrant
2019-12-10 11:33 ` [PATCH v2 1/4] xenbus: move xenbus_dev_shutdown() into frontend code Paul Durrant
2019-12-10 11:33 ` [PATCH v2 2/4] xenbus: limit when state is forced to closed Paul Durrant
2019-12-11 10:06   ` [Xen-devel] " Roger Pau Monné
2019-12-11 10:14     ` Durrant, Paul
2019-12-11 10:21       ` Jürgen Groß
2019-12-11 13:29         ` Durrant, Paul
2019-12-10 11:33 ` [PATCH v2 3/4] xen/interface: re-define FRONT/BACK_RING_ATTACH() Paul Durrant
2019-12-10 11:33 ` Paul Durrant [this message]
2019-12-11 10:45   ` [PATCH v2 4/4] xen-blkback: support dynamic unbind/bind Roger Pau Monné
2019-12-11 10:52     ` Durrant, Paul
2019-12-11 14:46       ` Durrant, Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191210113347.3404-5-pdurrant@amazon.com \
    --to=pdurrant@amazon.com \
    --cc=axboe@kernel.dk \
    --cc=boris.ostrovsky@oracle.com \
    --cc=jgross@suse.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=roger.pau@citrix.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).