[v8,1/4] MIPS: Ingenic: Add Ingenic X1000 support.
diff mbox series

Message ID 1575979363-25956-2-git-send-email-zhouyanjie@wanyeetech.com
State In Next
Commit 7a16ccd300c2e677df9bc3037c2493a6e768c805
Headers show
Series
  • [v8,1/4] MIPS: Ingenic: Add Ingenic X1000 support.
Related show

Commit Message

周琰杰 (Zhou Yanjie) Dec. 10, 2019, 12:02 p.m. UTC
Support the Ingenic X1000 SoC using the code under arch/mips/jz4740.
This is left unselectable in Kconfig until a X1000 based board is
added in a later commit.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---

Notes:
    v1->v2:
    Rebase on top of mips-next, use ingenic-timer driver
    for system timer and clocksource.
    
    v2->v3:
    Drop the 'apb' node.
    
    v3->v4:
    Adjust the node order to make it consistent with
    other Ingenic boards.
    
    v4->v5:
    No change.
    
    v5->v6:
    No change.
    
    v6->v7:
    Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@zoho.com>"
    to "周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>" because
    the old mailbox is in an unstable state.
    
    v7->v8:
    Merge [5/6] in v7 to this patch.

 arch/mips/boot/dts/ingenic/x1000.dtsi | 272 ++++++++++++++++++++++++++++++++++
 arch/mips/jz4740/Kconfig              |   6 +
 2 files changed, 278 insertions(+)
 create mode 100644 arch/mips/boot/dts/ingenic/x1000.dtsi

Comments

Paul Burton Jan. 9, 2020, 6:52 p.m. UTC | #1
Hello,

周琰杰 (Zhou Yanjie) wrote:
> Support the Ingenic X1000 SoC using the code under arch/mips/jz4740.
> This is left unselectable in Kconfig until a X1000 based board is
> added in a later commit.

Series applied to mips-next.

> MIPS: Ingenic: Add Ingenic X1000 support.
>   commit 7a16ccd300c2
>   https://git.kernel.org/mips/c/7a16ccd300c2
>   
>   Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>   Signed-off-by: Paul Burton <paulburton@kernel.org>
> 
> dt-bindings: Document yna vendor-prefix.
>   commit 9d022be3c192
>   https://git.kernel.org/mips/c/9d022be3c192
>   
>   Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>   Acked-by: Rob Herring <robh@kernel.org>
>   Signed-off-by: Paul Burton <paulburton@kernel.org>
> 
> dt-bindings: MIPS: Add Ingenic XBurst based boards.
>   commit 4b396e56a0b8
>   https://git.kernel.org/mips/c/4b396e56a0b8
>   
>   Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>   Reviewed-by: Rob Herring <robh@kernel.org>
>   Signed-off-by: Paul Burton <paulburton@kernel.org>
> 
> MIPS: Ingenic: Add YSH & ATIL CU Neo board support.
>   commit 0cd2c6e5701e
>   https://git.kernel.org/mips/c/0cd2c6e5701e
>   
>   Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
>   Acked-by: Paul Cercueil <paul@crapouillou.net>
>   [paulburton@kernel.org:
>     Drop stale mention of previously unselectable Kconfig entry.]
>   Signed-off-by: Paul Burton <paulburton@kernel.org>

Thanks,
    Paul

[ This message was auto-generated; if you believe anything is incorrect
  then please email paulburton@kernel.org to report it. ]

Patch
diff mbox series

diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
new file mode 100644
index 00000000..61061a4
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -0,0 +1,272 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,x1000", "ingenic,x1000e";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	exclk: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtclk: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: x1000-cgu@10000000 {
+		compatible = "ingenic,x1000-cgu";
+		reg = <0x10000000 0x100>;
+
+		#clock-cells = <1>;
+
+		clocks = <&exclk>, <&rtclk>;
+		clock-names = "ext", "rtc";
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,x1000-tcu",
+				 "ingenic,jz4770-tcu",
+				 "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu X1000_CLK_RTCLK
+			  &cgu X1000_CLK_EXCLK
+			  &cgu X1000_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		wdt: watchdog@0 {
+			compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+			reg = <0x0 0x10>;
+
+			clocks = <&cgu X1000_CLK_RTCLK>;
+			clock-names = "wdt";
+		};
+	};
+
+	rtc: rtc@10003000 {
+		compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+		reg = <0x10003000 0x4c>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+
+		clocks = <&cgu X1000_CLK_RTCLK>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,x1000-pinctrl";
+		reg = <0x10010000 0x800>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <50>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10032000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <49>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	pdma: dma-controller@13420000 {
+		compatible = "ingenic,x1000-dma";
+		reg = <0x13420000 0x400
+			   0x13421000 0x40>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu X1000_CLK_PDMA>;
+	};
+
+	mac: ethernet@134b0000 {
+		compatible = "ingenic,x1000-mac", "snps,dwmac";
+		reg = <0x134b0000 0x2000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <55>;
+		interrupt-names = "macirq";
+
+		clocks = <&cgu X1000_CLK_MAC>;
+		clock-names = "stmmaceth";
+
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	msc0: mmc@13450000 {
+		compatible = "ingenic,x1000-mmc";
+		reg = <0x13450000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		clocks = <&cgu X1000_CLK_MSC0>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+			   <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	msc1: mmc@13460000 {
+		compatible = "ingenic,x1000-mmc";
+		reg = <0x13460000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		clocks = <&cgu X1000_CLK_MSC1>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+			   <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 4dd0c44..6b96844 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -33,3 +33,9 @@  config MACH_JZ4780
 	select MIPS_CPU_SCACHE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_HIGHMEM
+
+config MACH_X1000
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_HIGHMEM