linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sudeep Holla <sudeep.holla@arm.com>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Sudeep Holla <sudeep.holla@arm.com>,
	Cristian Marussi <cristian.marussi@arm.com>
Subject: [PATCH 01/15] firmware: arm_scmi: Add support for multiple device per protocol
Date: Tue, 10 Dec 2019 14:53:31 +0000	[thread overview]
Message-ID: <20191210145345.11616-2-sudeep.holla@arm.com> (raw)
In-Reply-To: <20191210145345.11616-1-sudeep.holla@arm.com>

Currently only one scmi device is created for each protocol enumerated.
However, there is requirement to make use of some procotols by multiple
kernel subsystems/frameworks. One such example is SCMI PERFORMANCE
protocol which can be used by both cpufreq and devfreq drivers.
Similarly, SENSOR protocol may be used by hwmon and iio subsystems,
and POWER protocol may be used by genpd and regulator drivers.

In order to achieve that, let us extend the scmi bus to match based
not only protocol id but also the scmi device name if one is available.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scmi/bus.c    | 20 +++++++++++++++++---
 drivers/firmware/arm_scmi/driver.c |  6 +++---
 include/linux/scmi_protocol.h      |  5 ++++-
 3 files changed, 24 insertions(+), 7 deletions(-)

diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index 7a30952b463d..3714e6307b05 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -28,8 +28,12 @@ scmi_dev_match_id(struct scmi_device *scmi_dev, struct scmi_driver *scmi_drv)
 		return NULL;

 	for (; id->protocol_id; id++)
-		if (id->protocol_id == scmi_dev->protocol_id)
-			return id;
+		if (id->protocol_id == scmi_dev->protocol_id) {
+			if (!id->name)
+				return id;
+			else if (!strcmp(id->name, scmi_dev->name))
+				return id;
+		}

 	return NULL;
 }
@@ -125,7 +129,8 @@ static void scmi_device_release(struct device *dev)
 }

 struct scmi_device *
-scmi_device_create(struct device_node *np, struct device *parent, int protocol)
+scmi_device_create(struct device_node *np, struct device *parent, int protocol,
+		   const char *name)
 {
 	int id, retval;
 	struct scmi_device *scmi_dev;
@@ -134,8 +139,15 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol)
 	if (!scmi_dev)
 		return NULL;

+	scmi_dev->name = kstrdup_const(name ?: "unknown", GFP_KERNEL);
+	if (!scmi_dev->name) {
+		kfree(scmi_dev);
+		return NULL;
+	}
+
 	id = ida_simple_get(&scmi_bus_id, 1, 0, GFP_KERNEL);
 	if (id < 0) {
+		kfree_const(scmi_dev->name);
 		kfree(scmi_dev);
 		return NULL;
 	}
@@ -154,6 +166,7 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol)

 	return scmi_dev;
 put_dev:
+	kfree_const(scmi_dev->name);
 	put_device(&scmi_dev->dev);
 	ida_simple_remove(&scmi_bus_id, id);
 	return NULL;
@@ -161,6 +174,7 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol)

 void scmi_device_destroy(struct scmi_device *scmi_dev)
 {
+	kfree_const(scmi_dev->name);
 	scmi_handle_put(scmi_dev->handle);
 	ida_simple_remove(&scmi_bus_id, scmi_dev->id);
 	device_unregister(&scmi_dev->dev);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 3eb0382491ce..dee7ce3bd815 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -803,11 +803,11 @@ scmi_mbox_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)

 static inline void
 scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
-			    int prot_id)
+			    int prot_id, const char *name)
 {
 	struct scmi_device *sdev;

-	sdev = scmi_device_create(np, info->dev, prot_id);
+	sdev = scmi_device_create(np, info->dev, prot_id, name);
 	if (!sdev) {
 		dev_err(info->dev, "failed to create %d protocol device\n",
 			prot_id);
@@ -892,7 +892,7 @@ static int scmi_probe(struct platform_device *pdev)
 			continue;
 		}

-		scmi_create_protocol_device(child, info, prot_id);
+		scmi_create_protocol_device(child, info, prot_id, NULL);
 	}

 	return 0;
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 881fea47c83d..5c873a59b387 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -257,6 +257,7 @@ enum scmi_std_protocol {
 struct scmi_device {
 	u32 id;
 	u8 protocol_id;
+	const char *name;
 	struct device dev;
 	struct scmi_handle *handle;
 };
@@ -264,11 +265,13 @@ struct scmi_device {
 #define to_scmi_dev(d) container_of(d, struct scmi_device, dev)

 struct scmi_device *
-scmi_device_create(struct device_node *np, struct device *parent, int protocol);
+scmi_device_create(struct device_node *np, struct device *parent, int protocol,
+		   const char *name);
 void scmi_device_destroy(struct scmi_device *scmi_dev);

 struct scmi_device_id {
 	u8 protocol_id;
+	const char *name;
 };

 struct scmi_driver {
--
2.17.1


  reply	other threads:[~2019-12-10 14:54 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10 14:53 [PATCH 00/15] firmware: arm_scmi: Add support for multiple device per protocol Sudeep Holla
2019-12-10 14:53 ` Sudeep Holla [this message]
2019-12-10 17:02   ` [PATCH 01/15] " Cristian Marussi
2019-12-10 14:53 ` [PATCH 02/15] firmware: arm_scmi: Skip scmi mbox channel setup for addtional devices Sudeep Holla
2019-12-10 17:33   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 03/15] firmware: arm_scmi: Skip protocol initialisation for additional devices Sudeep Holla
2019-12-10 18:14   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 04/15] firmware: arm_scmi: Add names to scmi devices created Sudeep Holla
2019-12-10 18:26   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 05/15] firmware: arm_scmi: Add versions and identifier attributes using dev_groups Sudeep Holla
2019-12-11 13:21   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 06/15] firmware: arm_scmi: Update scmi_prot_init_fn_t to use device instead of handle Sudeep Holla
2019-12-11 17:34   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 07/15] firmware: arm_scmi: Stash version in protocol init functions Sudeep Holla
2019-12-11 17:35   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 08/15] firmware: arm_scmi: Add and initialise protocol version to scmi_device structure Sudeep Holla
2019-12-11 18:06   ` Cristian Marussi
2019-12-12 12:15     ` Sudeep Holla
2019-12-10 14:53 ` [PATCH 09/15] firmware: arm_scmi: Add scmi protocol version and id device attributes Sudeep Holla
2019-12-11 18:08   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 10/15] firmware: arm_scmi: Drop logging individual scmi protocol version Sudeep Holla
2019-12-11 18:09   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 11/15] firmware: arm_scmi: Match scmi device by both name and protocol id Sudeep Holla
2019-12-11 18:09   ` Cristian Marussi
2019-12-11 18:10   ` Cristian Marussi
2019-12-10 14:53 ` [PATCH 12/15] clk: scmi: " Sudeep Holla
2019-12-24  7:49   ` Stephen Boyd
2019-12-10 14:53 ` [PATCH 13/15] cpufreq: " Sudeep Holla
2019-12-11  2:39   ` Viresh Kumar
2019-12-11 10:13     ` Sudeep Holla
2019-12-11 10:30       ` Viresh Kumar
2019-12-10 14:53 ` [PATCH 14/15] hwmon: (scmi-hwmon) " Sudeep Holla
2019-12-10 18:06   ` Guenter Roeck
2019-12-10 18:20     ` Sudeep Holla
2019-12-10 14:53 ` [PATCH 15/15] reset: reset-scmi: " Sudeep Holla
2019-12-11  9:51   ` Philipp Zabel
2019-12-11 15:28     ` Sudeep Holla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191210145345.11616-2-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=cristian.marussi@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).