From: Soeren Moch <smoch@web.de>
To: Kalle Valo <kvalo@codeaurora.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Wright Feng <wright.feng@cypress.com>, Soeren Moch <smoch@web.de>,
Arend van Spriel <arend.vanspriel@broadcom.com>,
Franky Lin <franky.lin@broadcom.com>,
Hante Meuleman <hante.meuleman@broadcom.com>,
Chi-Hsien Lin <chi-hsien.lin@cypress.com>,
linux-wireless@vger.kernel.org,
brcm80211-dev-list.pdl@broadcom.com,
brcm80211-dev-list@cypress.com, netdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 6/9] brcmfmac: add RSDB condition when setting interface combinations
Date: Thu, 12 Dec 2019 00:52:50 +0100 [thread overview]
Message-ID: <20191211235253.2539-7-smoch@web.de> (raw)
In-Reply-To: <20191211235253.2539-1-smoch@web.de>
From: Wright Feng <wright.feng@cypress.com>
With firmware RSDB feature
1. The maximum support interface is four.
2. The maximum difference channel is two.
3. The maximum interfaces of {station/p2p client/AP} are two.
4. The maximum interface of p2p device is one.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
changes in v2:
- add missing s-o-b
- add review tag received for v1
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 54 ++++++++++++++++---
1 file changed, 46 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 0cf13cea1dbe..9d9dc9195e9e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6520,6 +6520,9 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
* #STA <= 1, #AP <= 1, channels = 1, 2 total
* #AP <= 4, matching BI, channels = 1, 4 total
*
+ * no p2p and rsdb:
+ * #STA <= 2, #AP <= 2, channels = 2, 4 total
+ *
* p2p, no mchan, and mbss:
*
* #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total
@@ -6531,6 +6534,10 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = {
* #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total
* #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total
* #AP <= 4, matching BI, channels = 1, 4 total
+ *
+ * p2p, rsdb, and no mbss:
+ * #STA <= 2, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 2, AP <= 2,
+ * channels = 2, 4 total
*/
static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
{
@@ -6538,13 +6545,14 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
struct ieee80211_iface_limit *c0_limits = NULL;
struct ieee80211_iface_limit *p2p_limits = NULL;
struct ieee80211_iface_limit *mbss_limits = NULL;
- bool mbss, p2p;
+ bool mbss, p2p, rsdb;
int i, c, n_combos;
mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS);
p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P);
+ rsdb = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB);
- n_combos = 1 + !!p2p + !!mbss;
+ n_combos = 1 + !!(p2p && !rsdb) + !!mbss;
combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL);
if (!combo)
goto err;
@@ -6555,16 +6563,36 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
c = 0;
i = 0;
- c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
+ if (p2p && rsdb)
+ c0_limits = kcalloc(4, sizeof(*c0_limits), GFP_KERNEL);
+ else if (p2p)
+ c0_limits = kcalloc(3, sizeof(*c0_limits), GFP_KERNEL);
+ else
+ c0_limits = kcalloc(2, sizeof(*c0_limits), GFP_KERNEL);
if (!c0_limits)
goto err;
- c0_limits[i].max = 1;
- c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
- if (p2p) {
+ if (p2p && rsdb) {
+ combo[c].num_different_channels = 2;
+ wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO) |
+ BIT(NL80211_IFTYPE_P2P_DEVICE);
+ c0_limits[i].max = 2;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+ c0_limits[i].max = 2;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
+ c0_limits[i].max = 2;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ combo[c].max_interfaces = 5;
+ } else if (p2p) {
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN))
combo[c].num_different_channels = 2;
else
combo[c].num_different_channels = 1;
+ c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_P2P_DEVICE);
@@ -6573,16 +6601,26 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
c0_limits[i].max = 1;
c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO);
+ combo[c].max_interfaces = i;
+ } else if (rsdb) {
+ combo[c].num_different_channels = 2;
+ c0_limits[i].max = 2;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ c0_limits[i].max = 2;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ combo[c].max_interfaces = 3;
} else {
combo[c].num_different_channels = 1;
c0_limits[i].max = 1;
+ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
+ c0_limits[i].max = 1;
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
+ combo[c].max_interfaces = i;
}
- combo[c].max_interfaces = i;
combo[c].n_limits = i;
combo[c].limits = c0_limits;
- if (p2p) {
+ if (p2p && !rsdb) {
c++;
i = 0;
p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
--
2.17.1
next prev parent reply other threads:[~2019-12-11 23:54 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 23:52 [PATCH v2 0/9] brcmfmac: add support for BCM4359 SDIO chipset Soeren Moch
2019-12-11 23:52 ` [PATCH v2 1/9] brcmfmac: reset two D11 cores if chip has two D11 cores Soeren Moch
2019-12-18 19:08 ` Kalle Valo
2019-12-11 23:52 ` [PATCH v2 2/9] brcmfmac: set F2 blocksize and watermark for 4359 Soeren Moch
2019-12-11 23:52 ` [PATCH v2 3/9] brcmfmac: fix rambase for 4359/9 Soeren Moch
2019-12-12 2:07 ` Chi-Hsien Lin
2019-12-11 23:52 ` [PATCH v2 4/9] brcmfmac: make errors when setting roaming parameters non-fatal Soeren Moch
2019-12-11 23:52 ` [PATCH v2 5/9] brcmfmac: add support for BCM4359 SDIO chipset Soeren Moch
2019-12-12 1:02 ` Soeren Moch
2019-12-12 2:09 ` Chi-Hsien Lin
2019-12-12 8:33 ` Ulf Hansson
2019-12-11 23:52 ` Soeren Moch [this message]
2019-12-11 23:52 ` [PATCH v2 7/9] brcmfmac: not set mbss in vif if firmware does not support MBSS Soeren Moch
2019-12-11 23:52 ` [PATCH v2 8/9] arm64: dts: rockchip: RockPro64: enable wifi module at sdio0 Soeren Moch
2019-12-11 23:52 ` [PATCH v2 9/9] arm64: dts: rockchip: RockPro64: hook up bluetooth at uart0 Soeren Moch
2019-12-12 10:22 ` Robin Murphy
2019-12-12 10:47 ` Soeren Moch
2019-12-12 9:42 ` [PATCH v2 0/9] brcmfmac: add support for BCM4359 SDIO chipset Kalle Valo
[not found] ` <0101016ef97cf6b5-2552a5e4-12de-4616-94d6-b63d9c795ed6-000000@us-west-2.amazonses.com>
2019-12-12 10:59 ` Soeren Moch
2019-12-15 21:24 ` Soeren Moch
2019-12-15 23:43 ` Heiko Stübner
2020-03-13 11:03 ` Chi-Hsien Lin
2020-03-13 13:17 ` Soeren Moch
2020-03-15 7:01 ` Chi-Hsien Lin
2019-12-18 11:55 ` Christian Hewitt
2019-12-18 23:04 ` Soeren Moch
2019-12-22 4:35 ` Christian Hewitt
2019-12-24 9:01 ` Arend Van Spriel
2019-12-24 9:44 ` Christian Hewitt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211235253.2539-7-smoch@web.de \
--to=smoch@web.de \
--cc=arend.vanspriel@broadcom.com \
--cc=brcm80211-dev-list.pdl@broadcom.com \
--cc=brcm80211-dev-list@cypress.com \
--cc=chi-hsien.lin@cypress.com \
--cc=franky.lin@broadcom.com \
--cc=hante.meuleman@broadcom.com \
--cc=heiko@sntech.de \
--cc=kvalo@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wright.feng@cypress.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).