From: Peng Fan <peng.fan@nxp.com>
To: "robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
"festevam@gmail.com" <festevam@gmail.com>
Cc: dl-linux-imx <linux-imx@nxp.com>,
Anson Huang <anson.huang@nxp.com>,
Leonard Crestez <leonard.crestez@nxp.com>,
Daniel Baluta <daniel.baluta@nxp.com>,
"S.j. Wang" <shengjiu.wang@nxp.com>, Jacky Bai <ping.bai@nxp.com>,
Jun Li <jun.li@nxp.com>, Abel Vesa <abel.vesa@nxp.com>,
"andrew.smirnov@gmail.com" <andrew.smirnov@gmail.com>,
"angus@akkea.ca" <angus@akkea.ca>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Peng Fan <peng.fan@nxp.com>
Subject: [PATCH] arm64: dts: imx8m: drop "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
Date: Thu, 12 Dec 2019 03:19:25 +0000 [thread overview]
Message-ID: <1576120601-28698-1-git-send-email-peng.fan@nxp.com> (raw)
From: Peng Fan <peng.fan@nxp.com>
There is no binding doc for these compatible string
"fsl,imx8mq-aips-bus" and "fsl,aips-bus", "simple-bus" is enough
for aips usage, so drop the upper two.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++----
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 20756440a420..a0dbf47ab320 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -232,7 +232,7 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus@30000000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
@@ -501,7 +501,7 @@
};
aips2: bus@30400000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@@ -560,7 +560,7 @@
};
aips3: bus@30800000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>;
@@ -775,7 +775,7 @@
};
aips4: bus@32c00000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 5c47443ceb3d..cce65b9a861f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -208,7 +208,7 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus@30000000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
reg = <0x30000000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -395,7 +395,7 @@
};
aips2: bus@30400000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
reg = <0x30400000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -455,7 +455,7 @@
};
aips3: bus@30800000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
reg = <0x30800000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -671,7 +671,7 @@
};
aips4: bus@32c00000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index a9fe065e3cde..6a1e83922c71 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -290,7 +290,7 @@
dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
bus@30000000 { /* AIPS1 */
- compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
@@ -692,7 +692,7 @@
};
bus@30400000 { /* AIPS2 */
- compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@@ -751,7 +751,7 @@
};
bus@30800000 { /* AIPS3 */
- compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>,
@@ -1023,7 +1023,7 @@
};
bus@32c00000 { /* AIPS4 */
- compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
--
2.16.4
next reply other threads:[~2019-12-12 3:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-12 3:19 Peng Fan [this message]
2019-12-23 3:55 ` [PATCH] arm64: dts: imx8m: drop "fsl,aips-bus" and "fsl,imx8mq-aips-bus" Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576120601-28698-1-git-send-email-peng.fan@nxp.com \
--to=peng.fan@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=andrew.smirnov@gmail.com \
--cc=angus@akkea.ca \
--cc=anson.huang@nxp.com \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ping.bai@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).