From: Elliot Berman <eberman@codeaurora.org>
To: bjorn.andersson@linaro.org, agross@kernel.org, swboyd@chromium.org
Cc: Elliot Berman <eberman@codeaurora.org>,
saiprakash.ranjan@codeaurora.org, tsoni@codeaurora.org,
sidgup@codeaurora.org, psodagud@codeaurora.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 17/17] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions
Date: Thu, 12 Dec 2019 18:51:24 +0000 [thread overview]
Message-ID: <0101016efb738cea-f84e3fa3-3962-4389-9d6a-c1ae29cf4aa0-000000@us-west-2.amazonses.com> (raw)
In-Reply-To: <1576176651-17089-1-git-send-email-eberman@codeaurora.org>
Dynamically support SMCCCC and legacy conventions by detecting which
convention to use at runtime. qcom_scm_call_atomic and qcom_scm_call can
then be moved in qcom_scm.c and use underlying convention backend as
appropriate. Thus, rename qcom_scm-64,-32 to reflect that they are
backends for -smc and -legacy, respectively.
Also add support for making SCM calls earlier than when SCM driver
probes to support use cases such as qcom_scm_set_cold_boot_addr. Support
is added by lazily initializing the convention and guarding the query
with a spin lock. The limitation of these early SCM calls is that they
cannot use DMA, as in the case of >4 arguments for SMC convention and
any non-atomic call for legacy convention.
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
---
drivers/firmware/Kconfig | 8 --
drivers/firmware/Makefile | 4 +-
.../firmware/{qcom_scm-32.c => qcom_scm-legacy.c} | 31 +----
drivers/firmware/{qcom_scm-64.c => qcom_scm-smc.c} | 95 +-------------
drivers/firmware/qcom_scm.c | 146 ++++++++++++++++++++-
drivers/firmware/qcom_scm.h | 27 +++-
6 files changed, 176 insertions(+), 135 deletions(-)
rename drivers/firmware/{qcom_scm-32.c => qcom_scm-legacy.c} (90%)
rename drivers/firmware/{qcom_scm-64.c => qcom_scm-smc.c} (57%)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index e40a77b..ea869ad 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -239,14 +239,6 @@ config QCOM_SCM
depends on ARM || ARM64
select RESET_CONTROLLER
-config QCOM_SCM_32
- def_bool y
- depends on QCOM_SCM && ARM
-
-config QCOM_SCM_64
- def_bool y
- depends on QCOM_SCM && ARM64
-
config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
bool "Qualcomm download mode enabled by default"
depends on QCOM_SCM
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 747fb73..e9fb838 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -17,9 +17,7 @@ obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
-obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
-obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o
-obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o
+obj-$(CONFIG_QCOM_SCM) += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-legacy.c
similarity index 90%
rename from drivers/firmware/qcom_scm-32.c
rename to drivers/firmware/qcom_scm-legacy.c
index 08220e7..8532e7c 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-legacy.c
@@ -26,7 +26,6 @@ struct arm_smccc_args {
unsigned long args[8];
};
-#define SCM_LEGACY_FNID(s, c) (((s) << 10) | ((c) & 0x3ff))
/**
* struct scm_legacy_command - one SCM command buffer
@@ -129,8 +128,8 @@ static void __scm_legacy_do(const struct arm_smccc_args *smc,
* and response buffers is taken care of by qcom_scm_call; however, callers are
* responsible for any other cached buffers passed over to the secure world.
*/
-int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
+int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
{
u8 arglen = desc->arginfo & 0xf;
int ret = 0, context_id;
@@ -218,9 +217,9 @@ int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
* This shall only be used with commands that are guaranteed to be
* uninterruptable, atomic and SMP safe.
*/
-int qcom_scm_call_atomic(struct device *unused,
- const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
+int scm_legacy_call_atomic(struct device *unused,
+ const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
{
int context_id;
struct arm_smccc_res smc_res;
@@ -241,23 +240,3 @@ int qcom_scm_call_atomic(struct device *unused,
return smc_res.a0;
}
-
-int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_INFO,
- .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
- .args[0] = SCM_LEGACY_FNID(svc_id, cmd_id),
- .arginfo = QCOM_SCM_ARGS(1),
- };
- struct qcom_scm_res res;
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-void __qcom_scm_init(void)
-{
-}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-smc.c
similarity index 57%
rename from drivers/firmware/qcom_scm-64.c
rename to drivers/firmware/qcom_scm-smc.c
index 4defc7c..497c13b 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-smc.c
@@ -14,8 +14,6 @@
#include "qcom_scm.h"
-#define SCM_SMC_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
-
/**
* struct arm_smccc_args
* @args: The array of values used in registers in smc instruction
@@ -24,7 +22,6 @@ struct arm_smccc_args {
unsigned long args[8];
};
-static u64 qcom_smccc_convention = -1;
static DEFINE_MUTEX(qcom_scm_lock);
#define QCOM_SCM_EBUSY_WAIT_MS 30
@@ -80,8 +77,8 @@ static void __scm_smc_do(const struct arm_smccc_args *smc,
} while (res->a0 == QCOM_SCM_V2_EBUSY);
}
-static int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res, bool atomic)
+int scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res, bool atomic)
{
int arglen = desc->arginfo & 0xf;
int i;
@@ -90,6 +87,9 @@ static int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
size_t alloc_len;
gfp_t flag = atomic ? GFP_ATOMIC : GFP_KERNEL;
u32 smccc_call_type = atomic ? ARM_SMCCC_FAST_CALL : ARM_SMCCC_STD_CALL;
+ u32 qcom_smccc_convention =
+ (qcom_scm_convention == SMC_CONVENTION_ARM_32) ?
+ ARM_SMCCC_SMC_32 : ARM_SMCCC_SMC_64;
struct arm_smccc_res smc_res;
struct arm_smccc_args smc = {0};
@@ -149,88 +149,3 @@ static int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
return (long)smc_res.a0 ? qcom_scm_remap_error(smc_res.a0) : 0;
}
-
-/**
- * qcom_scm_call() - Invoke a syscall in the secure world
- * @dev: device
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @desc: Descriptor structure containing arguments and return values
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- * This should *only* be called in pre-emptible context.
- */
-int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
-{
- might_sleep();
- return __scm_smc_call(dev, desc, res, false);
-}
-
-/**
- * qcom_scm_call_atomic() - atomic variation of qcom_scm_call()
- * @dev: device
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @desc: Descriptor structure containing arguments and return values
- * @res: Structure containing results from SMC/HVC call
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- * This can be called in atomic context.
- */
-int qcom_scm_call_atomic(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
-{
- return __scm_smc_call(dev, desc, res, true);
-}
-
-int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_INFO,
- .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.arginfo = QCOM_SCM_ARGS(1);
- desc.args[0] = SCM_SMC_FNID(svc_id, cmd_id) |
- (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-void __qcom_scm_init(void)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_INFO,
- .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
- .args[0] = SCM_SMC_FNID(QCOM_SCM_SVC_INFO,
- QCOM_SCM_INFO_IS_CALL_AVAIL) |
- (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT),
- .arginfo = QCOM_SCM_ARGS(1),
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- qcom_smccc_convention = ARM_SMCCC_SMC_64;
- // Device isn't required as there is only one argument - no device
- // needed to dma_map_single to secure world
- ret = qcom_scm_call_atomic(NULL, &desc, &res);
- if (!ret && res.result[0] == 1)
- goto out;
-
- qcom_smccc_convention = ARM_SMCCC_SMC_32;
- ret = qcom_scm_call_atomic(NULL, &desc, &res);
- if (!ret && res.result[0] == 1)
- goto out;
-
- qcom_smccc_convention = -1;
- BUG();
-out:
- pr_info("QCOM SCM SMC Convention: %lld\n", qcom_smccc_convention);
-}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index b29e6c1..77da9e6 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -72,6 +72,13 @@ static struct qcom_scm_wb_entry qcom_scm_wb[] = {
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
};
+static const char *qcom_scm_convention_names[] = {
+ [SMC_CONVENTION_UNKNOWN] = "unknown",
+ [SMC_CONVENTION_ARM_32] = "smc arm 32",
+ [SMC_CONVENTION_ARM_64] = "smc arm 64",
+ [SMC_CONVENTION_LEGACY] = "smc legacy",
+};
+
static struct qcom_scm *__scm;
static int qcom_scm_clk_enable(void)
@@ -107,6 +114,143 @@ static void qcom_scm_clk_disable(void)
clk_disable_unprepare(__scm->bus_clk);
}
+static int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+ u32 cmd_id);
+
+enum qcom_scm_convention qcom_scm_convention;
+static bool has_queried __read_mostly;
+static DEFINE_SPINLOCK(query_lock);
+
+static void __query_convention(void)
+{
+ unsigned long flags;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_INFO,
+ .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
+ .args[0] = SCM_SMC_FNID(QCOM_SCM_SVC_INFO,
+ QCOM_SCM_INFO_IS_CALL_AVAIL) |
+ (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT),
+ .arginfo = QCOM_SCM_ARGS(1),
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ spin_lock_irqsave(&query_lock, flags);
+ if (has_queried)
+ goto out;
+
+ qcom_scm_convention = SMC_CONVENTION_ARM_64;
+ // Device isn't required as there is only one argument - no device
+ // needed to dma_map_single to secure world
+ ret = scm_smc_call(NULL, &desc, &res, true);
+ if (!ret && res.result[0] == 1)
+ goto out;
+
+ qcom_scm_convention = SMC_CONVENTION_ARM_32;
+ ret = scm_smc_call(NULL, &desc, &res, true);
+ if (!ret && res.result[0] == 1)
+ goto out;
+
+ qcom_scm_convention = SMC_CONVENTION_LEGACY;
+out:
+ has_queried = true;
+ spin_unlock_irqrestore(&query_lock, flags);
+ pr_info("qcom_scm: convention: %s\n",
+ qcom_scm_convention_names[qcom_scm_convention]);
+}
+
+static inline enum qcom_scm_convention __get_convention(void)
+{
+ if (unlikely(!has_queried))
+ __query_convention();
+ return qcom_scm_convention;
+}
+
+/**
+ * qcom_scm_call() - Invoke a syscall in the secure world
+ * @dev: device
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @desc: Descriptor structure containing arguments and return values
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ * This should *only* be called in pre-emptible context.
+ */
+static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
+{
+ might_sleep();
+ switch (__get_convention()) {
+ case SMC_CONVENTION_ARM_32:
+ case SMC_CONVENTION_ARM_64:
+ return scm_smc_call(dev, desc, res, false);
+ case SMC_CONVENTION_LEGACY:
+ return scm_legacy_call(dev, desc, res);
+ default:
+ pr_err("Unknown current SCM calling convention.\n");
+ return -EINVAL;
+ }
+}
+
+/**
+ * qcom_scm_call_atomic() - atomic variation of qcom_scm_call()
+ * @dev: device
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @desc: Descriptor structure containing arguments and return values
+ * @res: Structure containing results from SMC/HVC call
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ * This can be called in atomic context.
+ */
+static int qcom_scm_call_atomic(struct device *dev,
+ const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
+{
+ switch (__get_convention()) {
+ case SMC_CONVENTION_ARM_32:
+ case SMC_CONVENTION_ARM_64:
+ return scm_smc_call(dev, desc, res, true);
+ case SMC_CONVENTION_LEGACY:
+ return scm_legacy_call_atomic(dev, desc, res);
+ default:
+ pr_err("Unknown current SCM calling convention.\n");
+ return -EINVAL;
+ }
+}
+
+static int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+ u32 cmd_id)
+{
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_INFO,
+ .cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+
+ desc.arginfo = QCOM_SCM_ARGS(1);
+ switch (__get_convention()) {
+ case SMC_CONVENTION_ARM_32:
+ case SMC_CONVENTION_ARM_64:
+ desc.args[0] = SCM_SMC_FNID(svc_id, cmd_id) |
+ (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
+ break;
+ case SMC_CONVENTION_LEGACY:
+ desc.args[0] = SCM_LEGACY_FNID(svc_id, cmd_id);
+ break;
+ default:
+ pr_err("Unknown SMC convention being used\n");
+ return -EINVAL;
+ }
+
+ ret = qcom_scm_call(dev, &desc, &res);
+
+ return ret ? : res.result[0];
+}
+
/**
* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
* @entry: Entry point function for the cpus
@@ -969,7 +1113,7 @@ static int qcom_scm_probe(struct platform_device *pdev)
__scm = scm;
__scm->dev = &pdev->dev;
- __qcom_scm_init();
+ __query_convention();
/*
* If requested enable "download mode", from this point on warmboot
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 9b7b357..d9ed670 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -3,6 +3,16 @@
*/
#ifndef __QCOM_SCM_INT_H
#define __QCOM_SCM_INT_H
+
+enum qcom_scm_convention {
+ SMC_CONVENTION_UNKNOWN,
+ SMC_CONVENTION_LEGACY,
+ SMC_CONVENTION_ARM_32,
+ SMC_CONVENTION_ARM_64,
+};
+
+extern enum qcom_scm_convention qcom_scm_convention;
+
#define MAX_QCOM_SCM_ARGS 10
#define MAX_QCOM_SCM_RETS 3
@@ -50,11 +60,16 @@ struct qcom_scm_res {
u64 result[MAX_QCOM_SCM_RETS];
};
-extern int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res);
-extern int qcom_scm_call_atomic(struct device *dev,
- const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res);
+#define SCM_SMC_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
+extern int scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res, bool atomic);
+
+#define SCM_LEGACY_FNID(s, c) (((s) << 10) | ((c) & 0x3ff))
+extern int scm_legacy_call_atomic(struct device *dev,
+ const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res);
+extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res);
#define QCOM_SCM_SVC_BOOT 0x01
#define QCOM_SCM_BOOT_SET_ADDR 0x01
@@ -77,8 +92,6 @@ extern int qcom_scm_call_atomic(struct device *dev,
#define QCOM_SCM_SVC_INFO 0x06
#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x01
-extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
- u32 cmd_id);
#define QCOM_SCM_SVC_MP 0x0c
#define QCOM_SCM_MP_RESTORE_SEC_CFG 0x02
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-12-12 18:51 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1576176651-17089-1-git-send-email-eberman@codeaurora.org>
2019-12-12 18:51 ` [PATCH v4 01/17] firmware: qcom_scm: Rename macros and structures Elliot Berman
2019-12-12 18:51 ` [PATCH v4 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs Elliot Berman
2019-12-12 18:51 ` [PATCH v4 04/17] firmware: qcom_scm-64: Make SMC macros less magical Elliot Berman
2019-12-12 18:51 ` [PATCH v4 03/17] firmware: qcom_scm: Remove unused qcom_scm_get_version Elliot Berman
2019-12-12 18:51 ` [PATCH v4 05/17] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc Elliot Berman
2019-12-12 18:51 ` [PATCH v4 08/17] firmware: qcom_scm-64: Improve SMC convention detection Elliot Berman
2019-12-12 18:51 ` [PATCH v4 06/17] firmware: qcom_scm-64: Add SCM results struct Elliot Berman
2019-12-12 18:51 ` [PATCH v4 10/17] firmware: qcom_scm-32: Add funcnum IDs Elliot Berman
2019-12-12 18:51 ` [PATCH v4 07/17] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc Elliot Berman
2019-12-12 18:51 ` [PATCH v4 09/17] firmware: qcom_scm-32: Use SMC arch wrappers Elliot Berman
2019-12-12 18:51 ` [PATCH v4 12/17] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call Elliot Berman
2019-12-12 18:51 ` [PATCH v4 13/17] firmware: qcom_scm-32: Create common legacy atomic call Elliot Berman
2019-12-12 18:51 ` [PATCH v4 11/17] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls Elliot Berman
2019-12-12 18:51 ` [PATCH v4 14/17] firmware: qcom_scm-32: Add device argument to atomic calls Elliot Berman
2019-12-12 18:51 ` [PATCH v4 15/17] firmware: qcom_scm: Order functions, definitions by service/command Elliot Berman
2019-12-12 18:51 ` Elliot Berman [this message]
2019-12-12 18:51 ` [PATCH v4 16/17] firmware: qcom_scm: Remove thin wrappers Elliot Berman
2020-01-05 11:21 ` Stephan Gerhold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0101016efb738cea-f84e3fa3-3962-4389-9d6a-c1ae29cf4aa0-000000@us-west-2.amazonses.com \
--to=eberman@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=psodagud@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).