From: Paul Cercueil <paul@crapouillou.net>
To: Bin Liu <b-liu@ti.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: od@zcrc.me, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 6/6] usb: musb: jz4740: Whitespace and indentation fixes
Date: Sat, 14 Dec 2019 23:11:26 +0100 [thread overview]
Message-ID: <20191214221126.93116-6-paul@crapouillou.net> (raw)
In-Reply-To: <20191214221126.93116-1-paul@crapouillou.net>
Fix lines with too much or not enough indentation, and lines which were
indented with spaces instead of tabs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/usb/musb/jz4740.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index a8cd2ba2ed06..f948eca654f3 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -23,9 +23,9 @@ struct jz4740_glue {
static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
{
- unsigned long flags;
- irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
- struct musb *musb = __hci;
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
+ struct musb *musb = __hci;
spin_lock_irqsave(&musb->lock, flags);
@@ -42,7 +42,7 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
* never see them set
*/
musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
- MUSB_INTR_RESET | MUSB_INTR_SOF;
+ MUSB_INTR_RESET | MUSB_INTR_SOF;
if (musb->int_usb || musb->int_tx || musb->int_rx)
retval = musb_interrupt(musb);
@@ -56,20 +56,20 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
}
static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
-{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
+ { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
};
static const struct musb_hdrc_config jz4740_musb_config = {
/* Silicon does not implement USB OTG. */
- .multipoint = 0,
+ .multipoint = 0,
/* Max EPs scanned, driver will decide which EP can be used. */
- .num_eps = 4,
+ .num_eps = 4,
/* RAMbits needed to configure EPs from table */
- .ram_bits = 9,
- .fifo_cfg = jz4740_musb_fifo_cfg,
- .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
+ .ram_bits = 9,
+ .fifo_cfg = jz4740_musb_fifo_cfg,
+ .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
};
static int jz4740_musb_init(struct musb *musb)
@@ -122,7 +122,7 @@ static int jz4740_probe(struct platform_device *pdev)
const struct musb_hdrc_platform_data *pdata = &jz4740_musb_pdata;
struct platform_device *musb;
struct jz4740_glue *glue;
- struct clk *clk;
+ struct clk *clk;
int ret;
glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
@@ -187,7 +187,7 @@ static int jz4740_probe(struct platform_device *pdev)
static int jz4740_remove(struct platform_device *pdev)
{
- struct jz4740_glue *glue = platform_get_drvdata(pdev);
+ struct jz4740_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->pdev);
clk_disable_unprepare(glue->clk);
--
2.24.0
next prev parent reply other threads:[~2019-12-14 22:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-14 22:11 [PATCH 1/6] usb: musb: jz4740: Suppress useless field in priv structure Paul Cercueil
2019-12-14 22:11 ` [PATCH 2/6] usb: musb: jz4740: Add local dev variable to clean up probe Paul Cercueil
2019-12-14 22:11 ` [PATCH 3/6] usb: musb: jz4740: Constify jz4740_musb_pdata struct Paul Cercueil
2019-12-14 22:11 ` [PATCH 4/6] usb: musb: jz4740: Rename platform_device field in priv struct Paul Cercueil
2019-12-14 22:11 ` [PATCH 5/6] usb: musb: jz4740: Comments fix Paul Cercueil
2019-12-14 22:11 ` Paul Cercueil [this message]
2019-12-16 17:19 ` [PATCH 1/6] usb: musb: jz4740: Suppress useless field in priv structure Bin Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191214221126.93116-6-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=b-liu@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=od@zcrc.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).