linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Ondrej Jirman <megous@megous.com>,
	Vasily Khoruzhick <anarsoul@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@googlegroups.com,
	Samuel Holland <samuel@sholland.org>
Subject: [PATCH v5 2/8] dt-bindings: mailbox: Add a sun6i message box binding
Date: Sat, 14 Dec 2019 22:24:49 -0600	[thread overview]
Message-ID: <20191215042455.51001-3-samuel@sholland.org> (raw)
In-Reply-To: <20191215042455.51001-1-samuel@sholland.org>

This mailbox hardware is present in Allwinner sun6i, sun8i, sun9i, and
sun50i SoCs. Add a device tree binding for it. As it has only been
tested on the A83T, A64, H3/H5, and H6 SoCs, only those compatibles are
included.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 .../mailbox/allwinner,sun6i-a31-msgbox.yaml   | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml

diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
new file mode 100644
index 000000000000..dd746e07acfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/allwinner,sun6i-a31-msgbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner sunxi Message Box
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description: |
+  The hardware message box on sun6i, sun8i, sun9i, and sun50i SoCs is a
+  two-user mailbox controller containing 8 unidirectional FIFOs. An interrupt
+  is raised for received messages, but software must poll to know when a
+  transmitted message has been acknowledged by the remote user. Each FIFO can
+  hold four 32-bit messages; when a FIFO is full, clients must wait before
+  attempting more transmissions.
+
+  Refer to ./mailbox.txt for generic information about mailbox device-tree
+  bindings.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - allwinner,sun8i-a83t-msgbox
+          - allwinner,sun8i-h3-msgbox
+          - allwinner,sun50i-a64-msgbox
+          - allwinner,sun50i-h6-msgbox
+      - const: allwinner,sun6i-a31-msgbox
+
+  reg:
+    items:
+      - description: MMIO register range
+
+  clocks:
+    maxItems: 1
+    description: bus clock
+
+  resets:
+    maxItems: 1
+    description: bus reset
+
+  interrupts:
+    maxItems: 1
+    description: controller interrupt
+
+  '#mbox-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    msgbox: mailbox@1c17000 {
+            compatible = "allwinner,sun8i-h3-msgbox",
+                         "allwinner,sun6i-a31-msgbox";
+            reg = <0x01c17000 0x1000>;
+            clocks = <&ccu CLK_BUS_MSGBOX>;
+            resets = <&ccu RST_BUS_MSGBOX>;
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            #mbox-cells = <1>;
+    };
+
+...
-- 
2.23.0


  parent reply	other threads:[~2019-12-15  4:25 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-15  4:24 [PATCH v5 0/8] Allwinner sun6i message box support Samuel Holland
2019-12-15  4:24 ` [PATCH v5 1/8] clk: sunxi-ng: Mark msgbox clocks as critical Samuel Holland
2019-12-16 14:00   ` Maxime Ripard
2019-12-15  4:24 ` Samuel Holland [this message]
2019-12-16 14:04   ` [PATCH v5 2/8] dt-bindings: mailbox: Add a sun6i message box binding Maxime Ripard
2019-12-16 19:45     ` Samuel Holland
2019-12-26 10:14       ` Maxime Ripard
2019-12-15  4:24 ` [PATCH v5 3/8] mailbox: sun6i-msgbox: Add a new mailbox driver Samuel Holland
2020-01-02 12:06   ` Philipp Zabel
2019-12-15  4:24 ` [PATCH v5 4/8] ARM: dts: sunxi: a83t: Add msgbox node Samuel Holland
2019-12-15  4:24 ` [PATCH v5 5/8] ARM: dts: sunxi: h3/h5: " Samuel Holland
2019-12-15  4:24 ` [PATCH v5 6/8] arm64: dts: allwinner: a64: " Samuel Holland
2019-12-15  4:24 ` [PATCH v5 7/8] arm64: dts: allwinner: h6: " Samuel Holland
2019-12-15  4:24 ` [PATCH v5 8/8] firmware: arm_scpi: Support unidirectional mailbox channels Samuel Holland
2019-12-18 18:48   ` Sudeep Holla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191215042455.51001-3-samuel@sholland.org \
    --to=samuel@sholland.org \
    --cc=anarsoul@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=megous@megous.com \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).