From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, jhugo@codeaurora.org, robh+dt@kernel.org
Cc: ohad@wizery.com, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
agross@kernel.org, Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH v2 4/5] arm64: dts: qcom: msm8998: Update reserved memory map
Date: Wed, 18 Dec 2019 18:52:16 +0530 [thread overview]
Message-ID: <20191218132217.28141-5-sibis@codeaurora.org> (raw)
In-Reply-To: <20191218132217.28141-1-sibis@codeaurora.org>
Update existing and add missing regions to the reserved memory map, as
described in version 7.1
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 70 ++++++++++++++++++++++-----
1 file changed, 59 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 873912c19f6ed..8d799e868a5d3 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -29,8 +29,13 @@
#size-cells = <2>;
ranges;
- memory@85800000 {
- reg = <0x0 0x85800000 0x0 0x800000>;
+ hyp_mem: memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x600000>;
+ no-map;
+ };
+
+ xbl_mem: memory@85e00000 {
+ reg = <0x0 0x85e00000 0x0 0x100000>;
no-map;
};
@@ -39,25 +44,68 @@
no-map;
};
- memory@86200000 {
+ tz_mem: memory@86200000 {
reg = <0x0 0x86200000 0x0 0x2d00000>;
no-map;
};
- wlan_msa_mem: memory@95700000 {
- reg = <0x0 0x95700000 0x0 0x100000>;
+ rmtfs_mem: memory@88f00000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0x88f00000 0x0 0x200000>;
no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
};
- rmtfs {
- compatible = "qcom,rmtfs-mem";
+ spss_mem: memory@8ab00000 {
+ reg = <0x0 0x8ab00000 0x0 0x700000>;
+ no-map;
+ };
- size = <0x0 0x200000>;
- alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ adsp_mem: memory@8b200000 {
+ reg = <0x0 0x8b200000 0x0 0x1a00000>;
no-map;
+ };
- qcom,client-id = <1>;
- qcom,vmid = <15>;
+ mpss_mem: memory@8cc00000 {
+ reg = <0x0 0x8cc00000 0x0 0x7000000>;
+ no-map;
+ };
+
+ venus_mem: memory@93c00000 {
+ reg = <0x0 0x93c00000 0x0 0x500000>;
+ no-map;
+ };
+
+ mba_mem: memory@94100000 {
+ reg = <0x0 0x94100000 0x0 0x200000>;
+ no-map;
+ };
+
+ slpi_mem: memory@94300000 {
+ reg = <0x0 0x94300000 0x0 0xf00000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@95200000 {
+ reg = <0x0 0x95200000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@95210000 {
+ reg = <0x0 0x95210000 0x0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@95600000 {
+ reg = <0x0 0x95600000 0x0 0x100000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@95700000 {
+ reg = <0x0 0x95700000 0x0 0x100000>;
+ no-map;
};
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-12-18 13:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 13:22 [PATCH v2 0/5] Add the missing remoteprocs on MSM8998 Sibi Sankar
2019-12-18 13:22 ` [PATCH v2 1/5] remoteproc: q6v5-mss: Remove mem clk from the active pool Sibi Sankar
2019-12-18 13:22 ` [PATCH v2 2/5] dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC Sibi Sankar
2019-12-18 13:22 ` [PATCH v2 3/5] remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support Sibi Sankar
2019-12-18 13:22 ` Sibi Sankar [this message]
2019-12-18 13:22 ` [PATCH v2 5/5] arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes Sibi Sankar
2019-12-20 6:59 ` Bjorn Andersson
2019-12-20 14:33 ` Jeffrey Hugo
2019-12-20 17:05 ` Bjorn Andersson
2019-12-20 17:10 ` Jeffrey Hugo
2019-12-20 18:02 ` Bjorn Andersson
2019-12-20 18:04 ` Jeffrey Hugo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191218132217.28141-5-sibis@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).