From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Andy Gross <agross@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks
Date: Mon, 6 Jan 2020 00:05:45 -0800 [thread overview]
Message-ID: <20200106080546.3192125-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20200106080546.3192125-1-bjorn.andersson@linaro.org>
The CLKREF clocks are all fed by the clock signal on the CXO2 pad on the
SoC. Update the definition of these clocks to allow this to be wired up
to the appropriate clock source.
Retain "xo" as the global named parent to make the change a nop in the
event that DT doesn't carry the necessary clocks definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v1:
- Rewrote DT binding part after the binding changed structure
.../devicetree/bindings/clock/qcom,gcc.yaml | 10 ++++++
drivers/clk/qcom/gcc-msm8996.c | 35 +++++++++++++++----
2 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index f2b5cd6fe0fe..8535ed93766b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -47,6 +47,11 @@ properties:
- description: Board XO source
- description: Board active XO source
- description: Sleep clock source
+ #qcom,gcc-msm8996
+ - items:
+ - description: XO source
+ - description: Second XO source
+ - description: Sleep clock source
#qcom,gcc-msm8998
- items:
- description: Board XO source
@@ -65,6 +70,11 @@ properties:
- const: bi_tcxo
- const: bi_tcxo_ao
- const: sleep_clk
+ #qcom,gcc-msm8996
+ - items:
+ - const: cxo
+ - const: cxo2
+ - const: sleep_clk
#qcom,gcc-msm8998
- items:
- const: xo
diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index d004cdaa0e39..3c3a7ff04562 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -3046,7 +3046,10 @@ static struct clk_branch gcc_usb3_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_usb3_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3060,7 +3063,10 @@ static struct clk_branch gcc_hdmi_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_hdmi_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3074,7 +3080,10 @@ static struct clk_branch gcc_edp_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_edp_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3088,7 +3097,10 @@ static struct clk_branch gcc_ufs_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_ufs_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3102,7 +3114,10 @@ static struct clk_branch gcc_pcie_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_pcie_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3116,7 +3131,10 @@ static struct clk_branch gcc_rx2_usb2_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_rx2_usb2_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
@@ -3130,7 +3148,10 @@ static struct clk_branch gcc_rx1_usb2_clkref_clk = {
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "gcc_rx1_usb2_clkref_clk",
- .parent_names = (const char *[]){ "xo" },
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "cxo2",
+ .name = "xo",
+ },
.num_parents = 1,
.ops = &clk_branch2_ops,
},
--
2.24.0
next prev parent reply other threads:[~2020-01-06 8:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-06 8:05 [PATCH v2 0/2] clk: qcom: gcc-msm8996: Fix CLKREF parenting Bjorn Andersson
2020-01-06 8:05 ` Bjorn Andersson [this message]
2020-01-06 16:55 ` [PATCH v2 1/2] clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks Stephen Boyd
2020-01-06 8:05 ` [PATCH v2 2/2] arm64: dts: qcom: msm8996: Define parent clocks for gcc Bjorn Andersson
2020-03-06 4:37 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200106080546.3192125-2-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).