[v3] ARM: mxs: Enable usbphy1 and usb1 on apx4devkit DTS
diff mbox series

Message ID 20200112140039.25420-1-aapo.vienamo@iki.fi
State Accepted
Commit c9aee09f7bb2c6dc559744c707d96bbbf6a5e15b
Headers show
Series
  • [v3] ARM: mxs: Enable usbphy1 and usb1 on apx4devkit DTS
Related show

Commit Message

Aapo Vienamo Jan. 12, 2020, 2 p.m. UTC
Enable the USB host port on the APx4 development board.

Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
---
 arch/arm/boot/dts/imx28-apx4devkit.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Shawn Guo Feb. 12, 2020, 7:43 a.m. UTC | #1
On Sun, Jan 12, 2020 at 04:00:39PM +0200, Aapo Vienamo wrote:
> Enable the USB host port on the APx4 development board.
> 
> Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>

Applied, thanks.

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 3a184d13887b..c5acc19c982d 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -183,10 +183,20 @@  auart2: serial@8006e000 {
 				pinctrl-0 = <&auart2_2pins_a>;
 				status = "okay";
 			};
+
+			usbphy1: usbphy@8007e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&usb1_pins_a>;
+				status = "okay";
+			};
 		};
 	};
 
 	ahb@80080000 {
+		usb1: usb@80090000 {
+		      status = "okay";
+		};
+
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";