From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 5/5] staging: rtl8188eu: cleanup whitespace in rtl8188e_dm.c
Date: Tue, 14 Jan 2020 14:44:22 +0100 [thread overview]
Message-ID: <20200114134422.13598-5-straube.linux@gmail.com> (raw)
In-Reply-To: <20200114134422.13598-1-straube.linux@gmail.com>
Replace tabs with spaces and/or remove spaces to use typical kernel
horizontal whitespace.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/rtl8188eu/hal/rtl8188e_dm.c | 44 ++++++++++-----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
index 5348db2725a1..241f55b92808 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
@@ -21,7 +21,7 @@
/* Initialize GPIO setting registers */
static void dm_InitGPIOSetting(struct adapter *Adapter)
{
- u8 tmp1byte;
+ u8 tmp1byte;
tmp1byte = usb_read8(Adapter, REG_GPIO_MUXCFG);
tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);
@@ -35,7 +35,7 @@ static void dm_InitGPIOSetting(struct adapter *Adapter)
static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
{
struct hal_data_8188e *hal_data = Adapter->HalData;
- struct dm_priv *pdmpriv = &hal_data->dmpriv;
+ struct dm_priv *pdmpriv = &hal_data->dmpriv;
struct odm_dm_struct *dm_odm = &hal_data->odmpriv;
/* Init Value */
@@ -59,38 +59,38 @@ static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
dm_odm->BbSwingIdxOfdmCurrent = 12;
dm_odm->BbSwingFlagOfdm = false;
- pdmpriv->InitODMFlag = ODM_RF_CALIBRATION |
- ODM_RF_TX_PWR_TRACK;
+ pdmpriv->InitODMFlag = ODM_RF_CALIBRATION |
+ ODM_RF_TX_PWR_TRACK;
dm_odm->SupportAbility = pdmpriv->InitODMFlag;
}
static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
{
- struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
- struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
+ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
+ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
struct hal_data_8188e *hal_data = Adapter->HalData;
struct odm_dm_struct *dm_odm = &hal_data->odmpriv;
- struct dm_priv *pdmpriv = &hal_data->dmpriv;
+ struct dm_priv *pdmpriv = &hal_data->dmpriv;
int i;
- pdmpriv->InitODMFlag = ODM_BB_DIG |
- ODM_BB_RA_MASK |
- ODM_BB_DYNAMIC_TXPWR |
- ODM_BB_FA_CNT |
- ODM_BB_RSSI_MONITOR |
- ODM_BB_CCK_PD |
- ODM_BB_PWR_SAVE |
- ODM_MAC_EDCA_TURBO |
- ODM_RF_CALIBRATION |
- ODM_RF_TX_PWR_TRACK;
+ pdmpriv->InitODMFlag = ODM_BB_DIG |
+ ODM_BB_RA_MASK |
+ ODM_BB_DYNAMIC_TXPWR |
+ ODM_BB_FA_CNT |
+ ODM_BB_RSSI_MONITOR |
+ ODM_BB_CCK_PD |
+ ODM_BB_PWR_SAVE |
+ ODM_MAC_EDCA_TURBO |
+ ODM_RF_CALIBRATION |
+ ODM_RF_TX_PWR_TRACK;
if (hal_data->AntDivCfg)
pdmpriv->InitODMFlag |= ODM_BB_ANT_DIV;
if (Adapter->registrypriv.mp_mode == 1) {
- pdmpriv->InitODMFlag = ODM_RF_CALIBRATION |
- ODM_RF_TX_PWR_TRACK;
+ pdmpriv->InitODMFlag = ODM_RF_CALIBRATION |
+ ODM_RF_TX_PWR_TRACK;
}
dm_odm->SupportAbility = pdmpriv->InitODMFlag;
@@ -123,7 +123,7 @@ static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
void rtl8188e_InitHalDm(struct adapter *Adapter)
{
- struct dm_priv *pdmpriv = &Adapter->HalData->dmpriv;
+ struct dm_priv *pdmpriv = &Adapter->HalData->dmpriv;
struct odm_dm_struct *dm_odm = &Adapter->HalData->odmpriv;
dm_InitGPIOSetting(Adapter);
@@ -167,7 +167,7 @@ void rtw_hal_dm_watchdog(struct adapter *Adapter)
void rtw_hal_dm_init(struct adapter *Adapter)
{
- struct dm_priv *pdmpriv = &Adapter->HalData->dmpriv;
+ struct dm_priv *pdmpriv = &Adapter->HalData->dmpriv;
struct odm_dm_struct *podmpriv = &Adapter->HalData->odmpriv;
memset(pdmpriv, 0, sizeof(struct dm_priv));
@@ -185,7 +185,7 @@ void rtw_hal_antdiv_rssi_compared(struct adapter *Adapter,
/* select optimum_antenna for before linked => For antenna
* diversity
*/
- if (dst->Rssi >= src->Rssi) {/* keep org parameter */
+ if (dst->Rssi >= src->Rssi) {/* keep org parameter */
src->Rssi = dst->Rssi;
src->PhyInfo.Optimum_antenna =
dst->PhyInfo.Optimum_antenna;
--
2.24.1
prev parent reply other threads:[~2020-01-14 13:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-14 13:44 [PATCH 1/5] staging: rtl8188eu: refactor rtw_hal_antdiv_before_linked() Michael Straube
2020-01-14 13:44 ` [PATCH 2/5] staging: rtl8188eu: convert rtw_hal_antdiv_before_linked() to bool Michael Straube
2020-01-14 13:44 ` [PATCH 3/5] staging: rtl8188eu: cleanup long lines in rtl8188e_dm.c Michael Straube
2020-01-14 13:44 ` [PATCH 4/5] staging: rtl8188eu: remove unnecessary parentheses " Michael Straube
2020-01-14 13:44 ` Michael Straube [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114134422.13598-5-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).