From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <t-kristo@ti.com>, <nm@ti.com>, <lokeshvutla@ti.com>
Cc: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 8/9] arm64: dts: ti: k3-am654-main: Add McASP nodes
Date: Thu, 23 Jan 2020 13:45:27 +0200 [thread overview]
Message-ID: <20200123114528.26552-9-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200123114528.26552-1-peter.ujfalusi@ti.com>
Add the nodes for McASP 0-2 and keep them disabled because several
required properties are not present as they are board specific.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 57 ++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 7c4853a8a02c..a856079c4fa9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -663,4 +663,61 @@ pcie1_ep: pcie-ep@5600000 {
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
};
+
+ mcasp0: mcasp@2b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b00000 0x0 0x2000>,
+ <0x0 0x02b08000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 104 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@2b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b10000 0x0 0x2000>,
+ <0x0 0x02b18000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 105 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@2b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b20000 0x0 0x2000>,
+ <0x0 0x02b28000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 106 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
};
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2020-01-23 11:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-23 11:45 [PATCH v3 0/9] arm64: dts: ti: UDMAP and McASP support Peter Ujfalusi
2020-01-23 11:45 ` [PATCH v3 1/9] arm64: dts: ti: k3-am65-main: Correct main NAVSS representation Peter Ujfalusi
2020-01-23 11:45 ` [PATCH v3 2/9] arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss Peter Ujfalusi
2020-01-23 11:45 ` [PATCH v3 3/9] arm64: dts: ti: k3-am65: DMA support Peter Ujfalusi
2020-01-23 11:45 ` [PATCH v3 4/9] arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS Peter Ujfalusi
2020-01-23 11:45 ` [PATCH v3 5/9] arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation Peter Ujfalusi
2020-01-23 11:45 ` [PATCH v3 6/9] arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss Peter Ujfalusi
2020-01-23 11:45 ` [PATCH v3 7/9] arm64: dts: ti: k3-j721e: DMA support Peter Ujfalusi
2020-01-23 11:45 ` Peter Ujfalusi [this message]
2020-01-23 11:45 ` [PATCH v3 9/9] arm64: dts: ti: k3-j721e-main: Add McASP nodes Peter Ujfalusi
2020-01-23 12:35 ` [PATCH v3 0/9] arm64: dts: ti: UDMAP and McASP support Lokesh Vutla
2020-01-24 11:32 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200123114528.26552-9-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).