From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Kent Gibson <warthog618@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
Jiri Kosina <jkosina@suse.cz>,
Stefani Seibold <stefani@seibold.net>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [RESEND PATCH v5 6/7] gpiolib: add new ioctl() for monitoring changes in line info
Date: Thu, 23 Jan 2020 15:05:05 +0100 [thread overview]
Message-ID: <20200123140506.29275-7-brgl@bgdev.pl> (raw)
In-Reply-To: <20200123140506.29275-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Currently there is no way for user-space to be informed about changes
in status of GPIO lines e.g. when someone else requests the line or its
config changes. We can only periodically re-read the line-info. This
is fine for simple one-off user-space tools, but any daemon that provides
a centralized access to GPIO chips would benefit hugely from an event
driven line info synchronization.
This patch adds a new ioctl() that allows user-space processes to reuse
the file descriptor associated with the character device for watching
any changes in line properties. Every such event contains the updated
line information.
Currently the events are generated on three types of status changes: when
a line is requested, when it's released and when its config is changed.
The first two are self-explanatory. For the third one: this will only
happen when another user-space process calls the new SET_CONFIG ioctl()
as any changes that can happen from within the kernel (i.e.
set_transitory() or set_debounce()) are of no interest to user-space.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/gpio/gpiolib.c | 187 ++++++++++++++++++++++++++++++++++++--
drivers/gpio/gpiolib.h | 1 +
include/uapi/linux/gpio.h | 30 ++++++
3 files changed, 210 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 00c1fce3c651..72ed84d822bf 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -555,6 +555,9 @@ static long linehandle_set_config(struct linehandle_state *lh,
if (ret)
return ret;
}
+
+ atomic_notifier_call_chain(&desc->gdev->notifier,
+ GPIOLINE_CHANGED_CONFIG, desc);
}
return 0;
}
@@ -1210,14 +1213,25 @@ static void gpio_desc_to_lineinfo(struct gpio_desc *desc,
spin_unlock_irqrestore(&gpio_lock, flags);
}
+struct gpio_chardev_data {
+ struct gpio_device *gdev;
+ wait_queue_head_t wait;
+ DECLARE_KFIFO(events, struct gpioline_info_changed, 32);
+ struct notifier_block lineinfo_changed_nb;
+ unsigned long *watched_lines;
+};
+
/*
* gpio_ioctl() - ioctl handler for the GPIO chardev
*/
static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
- struct gpio_device *gdev = filp->private_data;
+ struct gpio_chardev_data *priv = filp->private_data;
+ struct gpio_device *gdev = priv->gdev;
struct gpio_chip *chip = gdev->chip;
void __user *ip = (void __user *)arg;
+ struct gpio_desc *desc;
+ __u32 offset;
/* We fail any subsequent ioctl():s when the chip is gone */
if (!chip)
@@ -1239,9 +1253,9 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
return -EFAULT;
return 0;
- } else if (cmd == GPIO_GET_LINEINFO_IOCTL) {
+ } else if (cmd == GPIO_GET_LINEINFO_IOCTL ||
+ cmd == GPIO_GET_LINEINFO_WATCH_IOCTL) {
struct gpioline_info lineinfo;
- struct gpio_desc *desc;
if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
return -EFAULT;
@@ -1254,11 +1268,25 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
return -EFAULT;
+
+ if (cmd == GPIO_GET_LINEINFO_WATCH_IOCTL)
+ set_bit(desc_to_gpio(desc), priv->watched_lines);
+
return 0;
} else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
return linehandle_create(gdev, ip);
} else if (cmd == GPIO_GET_LINEEVENT_IOCTL) {
return lineevent_create(gdev, ip);
+ } else if (cmd == GPIO_GET_LINEINFO_UNWATCH_IOCTL) {
+ if (copy_from_user(&offset, ip, sizeof(offset)))
+ return -EFAULT;
+
+ desc = gpiochip_get_desc(chip, offset);
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+
+ clear_bit(desc_to_gpio(desc), &desc->flags);
+ return 0;
}
return -EINVAL;
}
@@ -1271,6 +1299,102 @@ static long gpio_ioctl_compat(struct file *filp, unsigned int cmd,
}
#endif
+static struct gpio_chardev_data *
+to_gpio_chardev_data(struct notifier_block *nb)
+{
+ return container_of(nb, struct gpio_chardev_data, lineinfo_changed_nb);
+}
+
+static int lineinfo_changed_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct gpio_chardev_data *priv = to_gpio_chardev_data(nb);
+ struct gpioline_info_changed chg;
+ struct gpio_desc *desc = data;
+ int ret;
+
+ if (!test_bit(desc_to_gpio(desc), priv->watched_lines))
+ return NOTIFY_DONE;
+
+ memset(&chg, 0, sizeof(chg));
+ chg.info.line_offset = gpio_chip_hwgpio(desc);
+ chg.event_type = action;
+ chg.timestamp = ktime_get_real_ns();
+ gpio_desc_to_lineinfo(desc, &chg.info);
+
+ ret = kfifo_in_spinlocked(&priv->events, &chg,
+ 1, &priv->wait.lock);
+ if (ret)
+ wake_up_poll(&priv->wait, EPOLLIN);
+ else
+ pr_debug_ratelimited("lineinfo event FIFO is full - event dropped\n");
+
+ return NOTIFY_OK;
+}
+
+static __poll_t lineinfo_watch_poll(struct file *filep,
+ struct poll_table_struct *pollt)
+{
+ struct gpio_chardev_data *priv = filep->private_data;
+ __poll_t events = 0;
+
+ poll_wait(filep, &priv->wait, pollt);
+
+ if (!kfifo_is_empty_spinlocked_noirqsave(&priv->events,
+ &priv->wait.lock))
+ events = EPOLLIN | EPOLLRDNORM;
+
+ return events;
+}
+
+static ssize_t lineinfo_watch_read(struct file *filep, char __user *buf,
+ size_t count, loff_t *off)
+{
+ struct gpio_chardev_data *priv = filep->private_data;
+ struct gpioline_info_changed event;
+ ssize_t bytes_read = 0;
+ int ret;
+
+ if (count < sizeof(event))
+ return -EINVAL;
+
+ do {
+ spin_lock(&priv->wait.lock);
+ if (kfifo_is_empty(&priv->events)) {
+ if (bytes_read) {
+ spin_unlock(&priv->wait.lock);
+ return bytes_read;
+ }
+
+ if (filep->f_flags & O_NONBLOCK) {
+ spin_unlock(&priv->wait.lock);
+ return -EAGAIN;
+ }
+
+ ret = wait_event_interruptible_locked(priv->wait,
+ !kfifo_is_empty(&priv->events));
+ if (ret) {
+ spin_unlock(&priv->wait.lock);
+ return ret;
+ }
+ }
+
+ ret = kfifo_out(&priv->events, &event, 1);
+ spin_unlock(&priv->wait.lock);
+ if (ret != 1) {
+ ret = -EIO;
+ break;
+ /* We should never get here. See lineevent_read(). */
+ }
+
+ if (copy_to_user(buf + bytes_read, &event, sizeof(event)))
+ return -EFAULT;
+ bytes_read += sizeof(event);
+ } while (count >= bytes_read + sizeof(event));
+
+ return bytes_read;
+}
+
/**
* gpio_chrdev_open() - open the chardev for ioctl operations
* @inode: inode for this chardev
@@ -1281,14 +1405,48 @@ static int gpio_chrdev_open(struct inode *inode, struct file *filp)
{
struct gpio_device *gdev = container_of(inode->i_cdev,
struct gpio_device, chrdev);
+ struct gpio_chardev_data *priv;
+ int ret = -ENOMEM;
/* Fail on open if the backing gpiochip is gone */
if (!gdev->chip)
return -ENODEV;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->watched_lines = bitmap_zalloc(gdev->chip->ngpio, GFP_KERNEL);
+ if (!priv->watched_lines)
+ goto out_free_priv;
+
+ init_waitqueue_head(&priv->wait);
+ INIT_KFIFO(priv->events);
+ priv->gdev = gdev;
+
+ priv->lineinfo_changed_nb.notifier_call = lineinfo_changed_notify;
+ ret = atomic_notifier_chain_register(&gdev->notifier,
+ &priv->lineinfo_changed_nb);
+ if (ret)
+ goto out_free_bitmap;
+
get_device(&gdev->dev);
- filp->private_data = gdev;
+ filp->private_data = priv;
- return nonseekable_open(inode, filp);
+ ret = nonseekable_open(inode, filp);
+ if (ret)
+ goto out_unregister_notifier;
+
+ return ret;
+
+out_unregister_notifier:
+ atomic_notifier_chain_unregister(&gdev->notifier,
+ &priv->lineinfo_changed_nb);
+out_free_bitmap:
+ bitmap_free(priv->watched_lines);
+out_free_priv:
+ kfree(priv);
+ return ret;
}
/**
@@ -1299,17 +1457,23 @@ static int gpio_chrdev_open(struct inode *inode, struct file *filp)
*/
static int gpio_chrdev_release(struct inode *inode, struct file *filp)
{
- struct gpio_device *gdev = container_of(inode->i_cdev,
- struct gpio_device, chrdev);
+ struct gpio_chardev_data *priv = filp->private_data;
+ struct gpio_device *gdev = priv->gdev;
+ bitmap_free(priv->watched_lines);
+ atomic_notifier_chain_unregister(&gdev->notifier,
+ &priv->lineinfo_changed_nb);
put_device(&gdev->dev);
+ kfree(priv);
+
return 0;
}
-
static const struct file_operations gpio_fileops = {
.release = gpio_chrdev_release,
.open = gpio_chrdev_open,
+ .poll = lineinfo_watch_poll,
+ .read = lineinfo_watch_read,
.owner = THIS_MODULE,
.llseek = no_llseek,
.unlocked_ioctl = gpio_ioctl,
@@ -1520,6 +1684,8 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
for (i = 0; i < chip->ngpio; i++)
gdev->descs[i].gdev = gdev;
+ ATOMIC_INIT_NOTIFIER_HEAD(&gdev->notifier);
+
#ifdef CONFIG_PINCTRL
INIT_LIST_HEAD(&gdev->pin_ranges);
#endif
@@ -2859,6 +3025,8 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label)
}
done:
spin_unlock_irqrestore(&gpio_lock, flags);
+ atomic_notifier_call_chain(&desc->gdev->notifier,
+ GPIOLINE_CHANGED_REQUESTED, desc);
return ret;
}
@@ -2956,6 +3124,9 @@ static bool gpiod_free_commit(struct gpio_desc *desc)
}
spin_unlock_irqrestore(&gpio_lock, flags);
+ atomic_notifier_call_chain(&desc->gdev->notifier,
+ GPIOLINE_CHANGED_RELEASED, desc);
+
return ret;
}
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index a1cbeabadc69..8e3969616cfe 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -54,6 +54,7 @@ struct gpio_device {
const char *label;
void *data;
struct list_head list;
+ struct atomic_notifier_head notifier;
#ifdef CONFIG_PINCTRL
/*
diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h
index 799cf823d493..10183d4d4276 100644
--- a/include/uapi/linux/gpio.h
+++ b/include/uapi/linux/gpio.h
@@ -59,6 +59,34 @@ struct gpioline_info {
/* Maximum number of requested handles */
#define GPIOHANDLES_MAX 64
+/* Possible line status change events */
+enum {
+ GPIOLINE_CHANGED_REQUESTED = 1,
+ GPIOLINE_CHANGED_RELEASED,
+ GPIOLINE_CHANGED_CONFIG,
+};
+
+/**
+ * struct gpioline_info_changed - Information about a change in status
+ * of a GPIO line
+ * @info: updated line information
+ * @timestamp: estimate of time of status change occurrence, in nanoseconds
+ * and GPIOLINE_CHANGED_CONFIG
+ * @event_type: one of GPIOLINE_CHANGED_REQUESTED, GPIOLINE_CHANGED_RELEASED
+ *
+ * Note: struct gpioline_info embedded here has 32-bit alignment on its own,
+ * but it works fine with 64-bit alignment too. With its 72 byte size, we can
+ * guarantee there are no implicit holes between it and subsequent members.
+ * The 5-byte padding at the end makes sure we don't add any implicit padding
+ * at the end of the structure on 64-bit architectures.
+ */
+struct gpioline_info_changed {
+ struct gpioline_info info;
+ __u64 timestamp;
+ __u32 event_type;
+ __u32 padding[5]; /* for future use */
+};
+
/* Linerequest flags */
#define GPIOHANDLE_REQUEST_INPUT (1UL << 0)
#define GPIOHANDLE_REQUEST_OUTPUT (1UL << 1)
@@ -176,6 +204,8 @@ struct gpioevent_data {
#define GPIO_GET_CHIPINFO_IOCTL _IOR(0xB4, 0x01, struct gpiochip_info)
#define GPIO_GET_LINEINFO_IOCTL _IOWR(0xB4, 0x02, struct gpioline_info)
+#define GPIO_GET_LINEINFO_WATCH_IOCTL _IOWR(0xB4, 0x0b, struct gpioline_info)
+#define GPIO_GET_LINEINFO_UNWATCH_IOCTL _IOWR(0xB4, 0x0c, __u32)
#define GPIO_GET_LINEHANDLE_IOCTL _IOWR(0xB4, 0x03, struct gpiohandle_request)
#define GPIO_GET_LINEEVENT_IOCTL _IOWR(0xB4, 0x04, struct gpioevent_request)
--
2.23.0
next prev parent reply other threads:[~2020-01-23 14:05 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-23 14:04 [RESEND PATCH v5 0/7] gpiolib: add an ioctl() for monitoring line status changes Bartosz Golaszewski
2020-01-23 14:05 ` [RESEND PATCH v5 1/7] kfifo: provide noirqsave variants of spinlocked in and out helpers Bartosz Golaszewski
2020-01-23 14:05 ` [RESEND PATCH v5 2/7] kfifo: provide kfifo_is_empty_spinlocked() Bartosz Golaszewski
2020-01-23 14:05 ` [RESEND PATCH v5 3/7] gpiolib: rework the locking mechanism for lineevent kfifo Bartosz Golaszewski
2020-01-23 14:05 ` [RESEND PATCH v5 4/7] gpiolib: emit a debug message when adding events to a full kfifo Bartosz Golaszewski
2020-01-23 14:05 ` [RESEND PATCH v5 5/7] gpiolib: provide a dedicated function for setting lineinfo Bartosz Golaszewski
2020-01-23 14:05 ` Bartosz Golaszewski [this message]
2020-01-23 14:49 ` [RESEND PATCH v5 6/7] gpiolib: add new ioctl() for monitoring changes in line info Andy Shevchenko
2020-01-23 14:05 ` [RESEND PATCH v5 7/7] tools: gpio: implement gpio-watch Bartosz Golaszewski
2020-01-23 14:50 ` [RESEND PATCH v5 0/7] gpiolib: add an ioctl() for monitoring line status changes Andy Shevchenko
2020-01-23 15:24 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200123140506.29275-7-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=akpm@linux-foundation.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=gregkh@linuxfoundation.org \
--cc=jkosina@suse.cz \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stefani@seibold.net \
--cc=warthog618@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).