From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
To: linux@roeck-us.net, jdelvare@suse.com, robh+dt@kernel.org
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Joshua.Scott@alliedtelesis.co.nz,
Chris.Packham@alliedtelesis.co.nz,
logan.shaw@alliedtelesis.co.nz
Subject: [PATCH v5 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation
Date: Fri, 24 Jan 2020 11:05:33 +1300 [thread overview]
Message-ID: <20200123220533.2228-3-logan.shaw@alliedtelesis.co.nz> (raw)
In-Reply-To: <20200123220533.2228-1-logan.shaw@alliedtelesis.co.nz>
Added a new file documenting the adt7475 devicetree and added the four
new properties to it.
Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
---
---
.../devicetree/bindings/hwmon/adt7475.yaml | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
new file mode 100644
index 000000000000..450da5e66e07
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/adt7475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADT7475 hwmon sensor
+
+maintainers:
+ - Jean Delvare <jdelvare@suse.com>
+
+description: |
+ The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
+ PWN fan controllers.
+
+ They support monitoring and controlling up to four fans (the ADT7490 can only
+ control up to three). They support reading a single on chip temperature
+ sensor and two off chip temperature sensors (the ADT7490 additionally
+ supports measuring up to three current external temperature sensors with
+ series resistance cancellation (SRC)).
+
+ Datasheets:
+ https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
+ https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
+ https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
+ https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
+
+ Description taken from omsemiconductors specification sheets, with minor
+ rephrasing.
+
+properties:
+ compatible:
+ enum:
+ - adi,adt7473
+ - adi,adt7475
+ - adi,adt7476
+ - adi,adt7490
+
+ reg:
+ maxItems: 1
+
+ bypass-attenuator-in0:
+ description: |
+ Configures bypassing the individual voltage input
+ attenuator, on in0. This is supported on the ADT7476 and ADT7490.
+ If set to a non-zero integer the attenuator is bypassed, if set to
+ zero the attenuator is not bypassed. If the property is absent then
+ the config register is not modified.
+ maxItems: 1
+
+ bypass-attenuator-in1:
+ description: |
+ Configures bypassing the individual voltage input
+ attenuator, on in1. This is supported on the ADT7473, ADT7475,
+ ADT7476 and ADT7490. If set to a non-zero integer the attenuator
+ is bypassed, if set to zero the attenuator is not bypassed. If the
+ property is absent then the config register is not modified.
+ maxItems: 1
+
+ bypass-attenuator-in3:
+ description: |
+ Configures bypassing the individual voltage input
+ attenuator, on in3. This is supported on the ADT7476 and ADT7490.
+ If set to a non-zero integer the attenuator is bypassed, if set to
+ zero the attenuator is not bypassed. If the property is absent then
+ the config register is not modified.
+ maxItems: 1
+
+ bypass-attenuator-in4:
+ description: |
+ Configures bypassing the individual voltage input
+ attenuator, on in4. This is supported on the ADT7476 and ADT7490.
+ If set to a non-zero integer the attenuator is bypassed, if set to
+ zero the attenuator is not bypassed. If the property is absent then
+ the config register is not modified.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@2e {
+ compatible = "adi,adt7476";
+ reg = <0x2e>;
+ bypass-attenuator-in0 = <1>;
+ bypass-attenuator-in1 = <0>;
+ };
+ };
+...
--
2.25.0
next prev parent reply other threads:[~2020-01-23 22:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-23 22:05 [PATCH v5 0/2] hwmon: (adt7475) Added attenuator bypass support Logan Shaw
2020-01-23 22:05 ` [PATCH v5 1/2] " Logan Shaw
2020-01-24 4:55 ` Guenter Roeck
2020-01-23 22:05 ` Logan Shaw [this message]
2020-01-25 23:09 ` [PATCH v5 2/2] dt-bindings: hwmon: (adt7475) Added missing adt7475 doccumentation Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200123220533.2228-3-logan.shaw@alliedtelesis.co.nz \
--to=logan.shaw@alliedtelesis.co.nz \
--cc=Chris.Packham@alliedtelesis.co.nz \
--cc=Joshua.Scott@alliedtelesis.co.nz \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).