[RFC net-next v3 05/10] net: bridge: mrp: Update MRP interface to add switchdev support

From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
	<bridge@lists.linux-foundation.org>, <jiri@resnulli.us>,
	<ivecera@redhat.com>, <davem@davemloft.net>,
	<roopa@cumulusnetworks.com>, <nikolay@cumulusnetworks.com>,
	<anirudh.venkataramanan@intel.com>, <olteanv@gmail.com>,
	<andrew@lunn.ch>, <jeffrey.t.kirsher@intel.com>,
	<UNGLinuxDriver@microchip.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Subject: [RFC net-next v3 05/10] net: bridge: mrp: Update MRP interface to add switchdev support
Date: Fri, 24 Jan 2020 17:18:23 +0100	[thread overview]
Message-ID: <20200124161828.12206-6-horatiu.vultur@microchip.com> (raw)
In-Reply-To: <20200124161828.12206-1-horatiu.vultur@microchip.com>

Extend the MRP interface to allow switchdev support. The following functions are
added:

br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add_port,
  and will notify the HW that a port is added to a MRP ring. The function gets
  as parameter the port and the ID of the ring.

br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del_port
  and will notify the HW that a port is removed from a MRP ring. The function
  gets as parameter the port and the ID of the ring.

br_mrp_port_switchdev_set_state - this corresponds to the function
  br_mrp_port_state. It would notify the HW if it should block or not non-MRP
  frames.

br_mrp_port_switchdev_set_port - this corresponds to the function
  br_mrp_port_role. It would set the port role, primary or secondary.

br_mrp_switchdev_set_role - this corresponds to the function br_mrp_ring_role
  and would set one of the role MRM or MRC.

br_mrp_switchdev_set_ring_state - this corresponds to the function
  br_mrp_ring_state and would set the ring to be open or closed.

br_mrp_switchdev_send_ring_test - this corresponds to the function
  br_mrp_start_test. This will notify the HW to start or stop generating
  MRP_Test frames. Value 0 for the interval parameter means to stop generating
  the frames.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 net/bridge/br_private_mrp.h | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/net/bridge/br_private_mrp.h b/net/bridge/br_private_mrp.h
index bea4ece4411c..de5ba7f730f6 100644
--- a/net/bridge/br_private_mrp.h
+++ b/net/bridge/br_private_mrp.h
@@ -35,6 +35,22 @@ int br_mrp_start_test(struct net_bridge *br, u32 ring_nr, u32 interval,
 		      u8 max_miss);
 int br_mrp_flush(struct net_bridge *br, u32 ring_nr);
 
+/* br_mrp_switchdev.c */
+int br_mrp_port_switchdev_add(struct net_bridge_port *p, u32 ring_nr);
+int br_mrp_port_switchdev_del(struct net_bridge_port *p, u32 ring_nr);
+int br_mrp_port_switchdev_set_state(struct net_bridge_port *p,
+				    enum br_mrp_port_state_type state);
+int br_mrp_port_switchdev_set_role(struct net_bridge_port *p,
+				   enum br_mrp_port_role_type role);
+
+int br_mrp_switchdev_set_ring_role(struct br_mrp *mrp,
+				   enum br_mrp_ring_role_type role);
+int br_mrp_switchdev_set_ring_state(struct br_mrp *mrp,
+				    enum br_mrp_ring_state_type state);
+
+int br_mrp_switchdev_send_ring_test(struct br_mrp *mrp, u32 interval,
+				    u8 max_miss);
+
 /* br_mrp_netlink.c */
 void br_mrp_port_open(struct net_device *dev, u8 loc);
 
-- 
2.17.1

