linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	"Lu Baolu" <baolu.lu@linux.intel.com>,
	Joerg Roedel <joro@8bytes.org>,
	David Woodhouse <dwmw2@infradead.org>
Cc: "Yi Liu" <yi.l.liu@intel.com>,
	"Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>,
	Alex Williamson <alex.williamson@redhat.com>,
	"Christoph Hellwig" <hch@infradead.org>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Eric Auger <eric.auger@redhat.com>,
	Jacob Pan <jacob.jun.pan@linux.intel.com>,
	Liu@vger.kernel.org, Yi L <yi.l.liu@linux.intel.com>
Subject: [PATCH V9 06/10] iommu/vt-d: Add svm/sva invalidate function
Date: Tue, 28 Jan 2020 22:01:49 -0800	[thread overview]
Message-ID: <1580277713-66934-7-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1580277713-66934-1-git-send-email-jacob.jun.pan@linux.intel.com>

When Shared Virtual Address (SVA) is enabled for a guest OS via
vIOMMU, we need to provide invalidation support at IOMMU API and driver
level. This patch adds Intel VT-d specific function to implement
iommu passdown invalidate API for shared virtual address.

The use case is for supporting caching structure invalidation
of assigned SVM capable devices. Emulated IOMMU exposes queue
invalidation capability and passes down all descriptors from the guest
to the physical IOMMU.

The assumption is that guest to host device ID mapping should be
resolved prior to calling IOMMU driver. Based on the device handle,
host IOMMU driver can replace certain fields before submit to the
invalidation queue.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
---
 drivers/iommu/intel-iommu.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 173 insertions(+)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 8a4136e805ac..b8aa6479b87f 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -5605,6 +5605,178 @@ static void intel_iommu_aux_detach_device(struct iommu_domain *domain,
 	aux_domain_remove_dev(to_dmar_domain(domain), dev);
 }
 
+/*
+ * 2D array for converting and sanitizing IOMMU generic TLB granularity to
+ * VT-d granularity. Invalidation is typically included in the unmap operation
+ * as a result of DMA or VFIO unmap. However, for assigned device where guest
+ * could own the first level page tables without being shadowed by QEMU. In
+ * this case there is no pass down unmap to the host IOMMU as a result of unmap
+ * in the guest. Only invalidations are trapped and passed down.
+ * In all cases, only first level TLB invalidation (request with PASID) can be
+ * passed down, therefore we do not include IOTLB granularity for request
+ * without PASID (second level).
+ *
+ * For an example, to find the VT-d granularity encoding for IOTLB
+ * type and page selective granularity within PASID:
+ * X: indexed by iommu cache type
+ * Y: indexed by enum iommu_inv_granularity
+ * [IOMMU_CACHE_INV_TYPE_IOTLB][IOMMU_INV_GRANU_ADDR]
+ *
+ * Granu_map array indicates validity of the table. 1: valid, 0: invalid
+ *
+ */
+const static int inv_type_granu_map[IOMMU_CACHE_INV_TYPE_NR][IOMMU_INV_GRANU_NR] = {
+	/* PASID based IOTLB, support PASID selective and page selective */
+	{0, 1, 1},
+	/* PASID based dev TLBs, only support all PASIDs or single PASID */
+	{1, 1, 0},
+	/* PASID cache */
+	{1, 1, 0}
+};
+
+const static u64 inv_type_granu_table[IOMMU_CACHE_INV_TYPE_NR][IOMMU_INV_GRANU_NR] = {
+	/* PASID based IOTLB */
+	{0, QI_GRAN_NONG_PASID, QI_GRAN_PSI_PASID},
+	/* PASID based dev TLBs */
+	{QI_DEV_IOTLB_GRAN_ALL, QI_DEV_IOTLB_GRAN_PASID_SEL, 0},
+	/* PASID cache */
+	{QI_PC_ALL_PASIDS, QI_PC_PASID_SEL, 0},
+};
+
+static inline int to_vtd_granularity(int type, int granu, u64 *vtd_granu)
+{
+	if (type >= IOMMU_CACHE_INV_TYPE_NR || granu >= IOMMU_INV_GRANU_NR ||
+		!inv_type_granu_map[type][granu])
+		return -EINVAL;
+
+	*vtd_granu = inv_type_granu_table[type][granu];
+
+	return 0;
+}
+
+static inline u64 to_vtd_size(u64 granu_size, u64 nr_granules)
+{
+	u64 nr_pages = (granu_size * nr_granules) >> VTD_PAGE_SHIFT;
+
+	/* VT-d size is encoded as 2^size of 4K pages, 0 for 4k, 9 for 2MB, etc.
+	 * IOMMU cache invalidate API passes granu_size in bytes, and number of
+	 * granu size in contiguous memory.
+	 */
+	return order_base_2(nr_pages);
+}
+
+#ifdef CONFIG_INTEL_IOMMU_SVM
+static int intel_iommu_sva_invalidate(struct iommu_domain *domain,
+		struct device *dev, struct iommu_cache_invalidate_info *inv_info)
+{
+	struct dmar_domain *dmar_domain = to_dmar_domain(domain);
+	struct device_domain_info *info;
+	struct intel_iommu *iommu;
+	unsigned long flags;
+	int cache_type;
+	u8 bus, devfn;
+	u16 did, sid;
+	int ret = 0;
+	u64 size;
+
+	if (!inv_info || !dmar_domain ||
+		inv_info->version != IOMMU_CACHE_INVALIDATE_INFO_VERSION_1)
+		return -EINVAL;
+
+	if (!dev || !dev_is_pci(dev))
+		return -ENODEV;
+
+	iommu = device_to_iommu(dev, &bus, &devfn);
+	if (!iommu)
+		return -ENODEV;
+
+	spin_lock_irqsave(&device_domain_lock, flags);
+	spin_lock(&iommu->lock);
+	info = iommu_support_dev_iotlb(dmar_domain, iommu, bus, devfn);
+	if (!info) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+	did = dmar_domain->iommu_did[iommu->seq_id];
+	sid = PCI_DEVID(bus, devfn);
+	size = to_vtd_size(inv_info->addr_info.granule_size, inv_info->addr_info.nb_granules);
+
+	for_each_set_bit(cache_type, (unsigned long *)&inv_info->cache, IOMMU_CACHE_INV_TYPE_NR) {
+		u64 granu = 0;
+		u64 pasid = 0;
+
+		ret = to_vtd_granularity(cache_type, inv_info->granularity, &granu);
+		if (ret) {
+			pr_err("Invalid cache type and granu combination %d/%d\n", cache_type,
+				inv_info->granularity);
+			break;
+		}
+
+		/* PASID is stored in different locations based on granularity */
+		if (inv_info->granularity == IOMMU_INV_GRANU_PASID)
+			pasid = inv_info->pasid_info.pasid;
+		else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
+			pasid = inv_info->addr_info.pasid;
+		else {
+			pr_err("Cannot find PASID for given cache type and granularity\n");
+			break;
+		}
+
+		switch (BIT(cache_type)) {
+		case IOMMU_CACHE_INV_TYPE_IOTLB:
+			if (size && (inv_info->addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1))) {
+				pr_err("Address out of range, 0x%llx, size order %llu\n",
+					inv_info->addr_info.addr, size);
+				ret = -ERANGE;
+				goto out_unlock;
+			}
+
+			qi_flush_piotlb(iommu, did,
+					pasid,
+					mm_to_dma_pfn(inv_info->addr_info.addr),
+					(granu == QI_GRAN_NONG_PASID) ? -1 : 1 << size,
+					inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
+
+			/*
+			 * Always flush device IOTLB if ATS is enabled since guest
+			 * vIOMMU exposes CM = 1, no device IOTLB flush will be passed
+			 * down.
+			 */
+			if (info->ats_enabled) {
+				qi_flush_dev_iotlb_pasid(iommu, sid, info->pfsid,
+						pasid, info->ats_qdep,
+						inv_info->addr_info.addr, size,
+						granu);
+			}
+			break;
+		case IOMMU_CACHE_INV_TYPE_DEV_IOTLB:
+			if (info->ats_enabled) {
+				qi_flush_dev_iotlb_pasid(iommu, sid, info->pfsid,
+						inv_info->addr_info.pasid, info->ats_qdep,
+						inv_info->addr_info.addr, size,
+						granu);
+			} else
+				pr_warn("Passdown device IOTLB flush w/o ATS!\n");
+
+			break;
+		case IOMMU_CACHE_INV_TYPE_PASID:
+			qi_flush_pasid_cache(iommu, did, granu, inv_info->pasid_info.pasid);
+
+			break;
+		default:
+			dev_err(dev, "Unsupported IOMMU invalidation type %d\n",
+				cache_type);
+			ret = -EINVAL;
+		}
+	}
+out_unlock:
+	spin_unlock(&iommu->lock);
+	spin_unlock_irqrestore(&device_domain_lock, flags);
+
+	return ret;
+}
+#endif
+
 static int intel_iommu_map(struct iommu_domain *domain,
 			   unsigned long iova, phys_addr_t hpa,
 			   size_t size, int iommu_prot, gfp_t gfp)
@@ -6183,6 +6355,7 @@ const struct iommu_ops intel_iommu_ops = {
 	.is_attach_deferred	= intel_iommu_is_attach_deferred,
 	.pgsize_bitmap		= INTEL_IOMMU_PGSIZES,
 #ifdef CONFIG_INTEL_IOMMU_SVM
+	.cache_invalidate	= intel_iommu_sva_invalidate,
 	.sva_bind_gpasid	= intel_svm_bind_gpasid,
 	.sva_unbind_gpasid	= intel_svm_unbind_gpasid,
 #endif
-- 
2.7.4


  parent reply	other threads:[~2020-01-29  5:56 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-29  6:01 [PATCH V9 00/10] Nested Shared Virtual Address (SVA) VT-d support Jacob Pan
2020-01-29  6:01 ` [PATCH V9 01/10] iommu/vt-d: Move domain helper to header Jacob Pan
2020-01-29  6:01 ` [PATCH V9 02/10] iommu/uapi: Define a mask for bind data Jacob Pan
2020-02-12 12:43   ` Auger Eric
2020-03-20 21:35     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 03/10] iommu/vt-d: Add nested translation helper function Jacob Pan
2020-02-12 12:43   ` Auger Eric
2020-02-24 22:55     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 04/10] iommu/vt-d: Add bind guest PASID support Jacob Pan
2020-01-30  7:22   ` Lu Baolu
2020-01-31 21:48     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 05/10] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2020-02-12 12:55   ` Auger Eric
2020-02-14 23:27     ` Jacob Pan
2020-02-25  8:32       ` Auger Eric
2020-01-29  6:01 ` Jacob Pan [this message]
2020-02-12 13:13   ` [PATCH V9 06/10] iommu/vt-d: Add svm/sva invalidate function Auger Eric
2020-02-14 23:48     ` Jacob Pan
2020-02-21  6:34   ` Liu, Yi L
2020-02-21 19:08     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 07/10] iommu/vt-d: Cache virtual command capability register Jacob Pan
2020-02-12 13:00   ` Auger Eric
2020-02-21 20:20     ` Jacob Pan
2020-01-29  6:01 ` [PATCH V9 08/10] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2020-01-29  6:01 ` [PATCH V9 09/10] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2020-01-29  6:01 ` [PATCH V9 10/10] iommu/vt-d: Report PASID format as domain attribute Jacob Pan
2020-01-30  7:54   ` Lu Baolu
2020-02-04  5:43     ` Jacob Pan
2020-01-29 12:18 ` [PATCH V9 00/10] Nested Shared Virtual Address (SVA) VT-d support Liu, Yi L

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1580277713-66934-7-git-send-email-jacob.jun.pan@linux.intel.com \
    --to=jacob.jun.pan@linux.intel.com \
    --cc=Liu@vger.kernel.org \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=eric.auger@redhat.com \
    --cc=hch@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.com \
    --cc=jic23@kernel.org \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yi.l.liu@intel.com \
    --cc=yi.l.liu@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).