From: Linus Walleij <linus.walleij@linaro.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [GIT PULL] GPIO changes for v5.6
Date: Wed, 29 Jan 2020 09:08:01 +0100 [thread overview]
Message-ID: <CACRpkdYYKS0jMOUu77cudjzOFnHPm3K3aOnmGgUkdVFHz=RSmQ@mail.gmail.com> (raw)
Hi Linus,
here is the bulk of the GPIO changes for v5.6.
This is a pretty calm cycle so far, nothing special going
on really. Some more changes will come in from the
irqchip and pin control trees.
I also delete an orphan include file for FMC that was
dangling since I deleted that subsystem through the
GPIO tree it comes here again.
Please pull it in!
Yours,
Linus Walleij
The following changes since commit b3a987b0264d3ddbb24293ebff10eddfc472f653:
Linux 5.5-rc6 (2020-01-12 16:55:08 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
tags/gpio-v5.6-1
for you to fetch changes up to 0282c72d30d32913d641dc81f3f38607ace98802:
Merge tag 'gpio-updates-for-v5.6-part2' of
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
(2020-01-26 01:01:55 +0100)
----------------------------------------------------------------
This is the bulk of GPIO changes for the v5.6 kernel cycle
Core changes:
- Document the usecases for the kernelspace vs userspace
handling of GPIOs.
- Handle MSI (message signalled interrupts) properly in the
core hierarchical irqdomain code.
- Fix a rare race condition while initializing the descriptor
array.
New drivers:
- Xylon LogiCVC GPIO driver.
- WDC934x GPIO controller driver.
Driver improvements:
- Implemented suspend/resume in the Tegra driver.
- MPC8xx edge detection fixup.
- Properly convert ThunderX to use hierarchical irqdomain
with GPIOLIB_IRQCHIP on top of the revert of the previous
buggy switchover. This time it works (hopefully).
Misc:
- Drop a FMC remnant file <linux/ipmi-fru.h>
- A slew of fixes.
----------------------------------------------------------------
Andy Shevchenko (2):
gpio: pca953x: Remove redundant forward declaration
gpiolib: Make use of assign_bit() API
Bartosz Golaszewski (8):
gpiolib: use 'unsigned int' instead of 'unsigned' in gpio_set_config()
gpiolib: have a single place of calling set_config()
gpiolib: convert the type of hwnum to unsigned int in gpiochip_get_desc()
gpiolib: use gpiochip_get_desc() in linehandle_create()
gpiolib: use gpiochip_get_desc() in lineevent_create()
gpiolib: use gpiochip_get_desc() in gpio_ioctl()
gpio: mockup: update the license tag
gpio: mockup: sort headers alphabetically
Dan Callaghan (1):
gpiolib: hold gpio devices lock until ->descs array is initialised
Dmitry Osipenko (3):
gpio: tegra: Use generic readl_relaxed/writel_relaxed accessors
gpio: tegra: Properly handle irq_set_irq_wake() error
gpio: tegra: Use NOIRQ phase for suspend/resume
Enrico Weigelt, metux IT consult (2):
gpio: remove unneeded MODULE_VERSION() usage
gpio: gpiolib: fix confusing indention
Geert Uytterhoeven (2):
gpiolib: Add GPIOCHIP_NAME definition
dt-bindings: gpio: rcar: Document r8a77961 support
Jia-Ju Bai (2):
gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in
grgpio_remove()
gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in
grgpio_irq_map/unmap()
Kevin Hao (6):
Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as arg
gpiolib: Add the support for the msi parent domain
gpio: thunderx: Switch to GPIOLIB_IRQCHIP
gpio: Fix the no return statement warning
gpiolib: Lower verbosity when allocating hierarchy irq
Linus Walleij (6):
Merge tag 'gpio-updates-for-v5.6-part1' of
git://git.kernel.org/.../brgl/linux into devel
gpio: Update TODO
gpio: Add use guidance documentation
Merge tag 'v5.5-rc6' into devel
Merge branch 'fixup-thunderx-hierarchy' into devel
Merge tag 'gpio-updates-for-v5.6-part2' of
git://git.kernel.org/.../brgl/linux into devel
Lukas Bulwahn (1):
fmc: remove left-over ipmi-fru.h after fmc deletion
Matti Vaittinen (1):
docs: driver-model: Add missing managed GPIO array get functions
Maxim Kiselev (1):
gpio: mvebu: clear irq in edge cause register before unmask edge irq
Ooi, Joyce (2):
gpio: altera: change to platform_get_irq_optional to avoid
false-positive error
MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer
Paul Kocialkowski (4):
dt-bindings: Add Xylon vendor prefix
dt-bindings: mfd: Document the Xylon LogiCVC multi-function device
dt-bindings: gpio: Document the Xylon LogiCVC GPIO controller
gpio: Add support for the Xylon LogiCVC GPIOs
Peng Fan (2):
gpio: mvebu: use platform_irq_count
gpio: bcm-kona: use platform_irq_count
Sachin agarwal (2):
gpio: vx855: fixed a typo
gpio: aspeed-sgpio: fixed typos
Shaokun Zhang (1):
gpio: Remove the unused flags
Song Hui (1):
gpio: mpc8xxx: ls1088a/ls1028a edge detection mode bug fixs.
Srinivas Kandagatla (2):
dt-bindings: gpio: wcd934x: Add bindings for gpio
gpio: wcd934x: Add support to wcd934x gpio controller
Stephen Boyd (1):
gpiolib: Set lockdep class for hierarchical irq domains
Vignesh Raghavendra (1):
gpio: pca953x: Don't hardcode irq trigger type
YueHaibing (2):
gpiolib: remove set but not used variable 'config'
gpiolib: Remove duplicated function gpio_do_set_config()
.../bindings/gpio/qcom,wcd934x-gpio.yaml | 47 ++++++
.../devicetree/bindings/gpio/renesas,gpio-rcar.txt | 3 +-
.../bindings/gpio/xylon,logicvc-gpio.yaml | 69 ++++++++
.../devicetree/bindings/mfd/xylon,logicvc.yaml | 50 ++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
Documentation/driver-api/driver-model/devres.rst | 2 +
Documentation/driver-api/gpio/drivers-on-gpio.rst | 8 +-
Documentation/driver-api/gpio/index.rst | 1 +
Documentation/driver-api/gpio/using-gpio.rst | 50 ++++++
MAINTAINERS | 2 +-
drivers/gpio/Kconfig | 13 ++
drivers/gpio/Makefile | 2 +
drivers/gpio/TODO | 46 +++++-
drivers/gpio/gpio-altera.c | 2 +-
drivers/gpio/gpio-aspeed-sgpio.c | 2 +-
drivers/gpio/gpio-aspeed.c | 2 +-
drivers/gpio/gpio-bcm-kona.c | 12 +-
drivers/gpio/gpio-creg-snps.c | 4 +-
drivers/gpio/gpio-grgpio.c | 15 +-
drivers/gpio/gpio-logicvc.c | 170 +++++++++++++++++++
drivers/gpio/gpio-mockup.c | 16 +-
drivers/gpio/gpio-mpc8xxx.c | 1 +
drivers/gpio/gpio-mvebu.c | 8 +-
drivers/gpio/gpio-pca953x.c | 5 +-
drivers/gpio/gpio-sama5d2-piobu.c | 1 -
drivers/gpio/gpio-tb10x.c | 1 -
drivers/gpio/gpio-tegra.c | 21 ++-
drivers/gpio/gpio-tegra186.c | 13 +-
drivers/gpio/gpio-thunderx.c | 36 +++-
drivers/gpio/gpio-vx855.c | 2 +-
drivers/gpio/gpio-wcd934x.c | 121 ++++++++++++++
drivers/gpio/gpiolib-sysfs.c | 7 +-
drivers/gpio/gpiolib.c | 182 ++++++++++-----------
drivers/gpio/gpiolib.h | 5 +-
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 +-
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c | 2 +-
include/linux/gpio/driver.h | 26 ++-
include/linux/ipmi-fru.h | 134 ---------------
38 files changed, 768 insertions(+), 317 deletions(-)
create mode 100644
Documentation/devicetree/bindings/gpio/qcom,wcd934x-gpio.yaml
create mode 100644
Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
create mode 100644 Documentation/driver-api/gpio/using-gpio.rst
create mode 100644 drivers/gpio/gpio-logicvc.c
create mode 100644 drivers/gpio/gpio-wcd934x.c
delete mode 100644 include/linux/ipmi-fru.h
next reply other threads:[~2020-01-29 8:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 8:08 Linus Walleij [this message]
2020-01-29 18:00 ` [GIT PULL] GPIO changes for v5.6 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACRpkdYYKS0jMOUu77cudjzOFnHPm3K3aOnmGgUkdVFHz=RSmQ@mail.gmail.com' \
--to=linus.walleij@linaro.org \
--cc=bgolaszewski@baylibre.com \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).