From: Hsin-Yi Wang <hsinyi@chromium.org>
To: linux-arm-kernel@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mediatek@lists.infradead.org,
Nicolas Boichat <drinkcat@chromium.org>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Daniel Kurtz <djkurtz@chromium.org>
Subject: [PATCH v6 3/5] arm64: dts: mt8173: fix unit name warnings
Date: Fri, 7 Feb 2020 17:02:26 +0800 [thread overview]
Message-ID: <20200207090227.250720-4-hsinyi@chromium.org> (raw)
In-Reply-To: <20200207090227.250720-1-hsinyi@chromium.org>
Fixing several unit name warnings:
Warning (unit_address_vs_reg): /oscillator@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /oscillator@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /oscillator@2: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/cpu_crit@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /reserved-memory/vpu_dma_mem_region: node has a reg or ranges property, but no unit name
Warning (simple_bus_reg): /soc/pinctrl@10005000: simple-bus unit address format error, expected "1000b000"
Warning (simple_bus_reg): /soc/interrupt-controller@10220000: simple-bus unit address format error, expected "10221000"
Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-'
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 38 ++++++++++++------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 790cd64aa447..2b7f566fb407 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -42,14 +42,14 @@ aliases {
dpi0 = &dpi0;
dsi0 = &dsi0;
dsi1 = &dsi1;
- mdp_rdma0 = &mdp_rdma0;
- mdp_rdma1 = &mdp_rdma1;
- mdp_rsz0 = &mdp_rsz0;
- mdp_rsz1 = &mdp_rsz1;
- mdp_rsz2 = &mdp_rsz2;
- mdp_wdma0 = &mdp_wdma0;
- mdp_wrot0 = &mdp_wrot0;
- mdp_wrot1 = &mdp_wrot1;
+ mdp-rdma0 = &mdp_rdma0;
+ mdp-rdma1 = &mdp_rdma1;
+ mdp-rsz0 = &mdp_rsz0;
+ mdp-rsz1 = &mdp_rsz1;
+ mdp-rsz2 = &mdp_rsz2;
+ mdp-wdma0 = &mdp_wdma0;
+ mdp-wrot0 = &mdp_wrot0;
+ mdp-wrot1 = &mdp_wrot1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -246,21 +246,21 @@ psci {
cpu_on = <0x84000003>;
};
- clk26m: oscillator@0 {
+ clk26m: oscillator0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
clock-output-names = "clk26m";
};
- clk32k: oscillator@1 {
+ clk32k: oscillator1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32000>;
clock-output-names = "clk32k";
};
- cpum_ck: oscillator@2 {
+ cpum_ck: oscillator2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
@@ -276,19 +276,19 @@ cpu_thermal: cpu_thermal {
sustainable-power = <1500>; /* milliwatts */
trips {
- threshold: trip-point@0 {
+ threshold: trip-point0 {
temperature = <68000>;
hysteresis = <2000>;
type = "passive";
};
- target: trip-point@1 {
+ target: trip-point1 {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit@0 {
+ cpu_crit: cpu_crit0 {
temperature = <115000>;
hysteresis = <2000>;
type = "critical";
@@ -296,13 +296,13 @@ cpu_crit: cpu_crit@0 {
};
cooling-maps {
- map@0 {
+ map0 {
trip = <&target>;
cooling-device = <&cpu0 0 0>,
<&cpu1 0 0>;
contribution = <3072>;
};
- map@1 {
+ map1 {
trip = <&target>;
cooling-device = <&cpu2 0 0>,
<&cpu3 0 0>;
@@ -316,7 +316,7 @@ reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
- vpu_dma_reserved: vpu_dma_mem_region {
+ vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
compatible = "shared-dma-pool";
reg = <0 0xb7000000 0 0x500000>;
alignment = <0x1000>;
@@ -368,7 +368,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
reg = <0 0x10005000 0 0x1000>;
};
- pio: pinctrl@10005000 {
+ pio: pinctrl@1000b000 {
compatible = "mediatek,mt8173-pinctrl";
reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
@@ -575,7 +575,7 @@ mipi_tx1: mipi-dphy@10216000 {
status = "disabled";
};
- gic: interrupt-controller@10220000 {
+ gic: interrupt-controller@10221000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
--
2.25.0.225.g125e21ebc7-goog
next prev parent reply other threads:[~2020-02-07 9:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-07 9:02 [PATCH v6 0/5] Add mt8173 elm and hana board Hsin-Yi Wang
2020-02-07 9:02 ` [PATCH v6 1/5] dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana Hsin-Yi Wang
2020-02-07 9:02 ` [PATCH v6 2/5] arm64: dts: mt8173: add uart aliases Hsin-Yi Wang
2020-02-07 9:02 ` Hsin-Yi Wang [this message]
2020-02-07 9:02 ` [PATCH v6 4/5] arm64: dts: mediatek: add mt8173 elm and hana board Hsin-Yi Wang
2020-02-07 9:02 ` [PATCH v6 5/5] media: mtk-mdp: Use correct aliases name Hsin-Yi Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200207090227.250720-4-hsinyi@chromium.org \
--to=hsinyi@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=drinkcat@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).