linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: mst@redhat.com, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, virtualization@lists.linux-foundation.org,
	netdev@vger.kernel.org
Cc: tiwei.bie@intel.com, jgg@mellanox.com,
	maxime.coquelin@redhat.com, cunming.liang@intel.com,
	zhihong.wang@intel.com, rob.miller@broadcom.com,
	xiao.w.wang@intel.com, haotian.wang@sifive.com,
	lingshan.zhu@intel.com, eperezma@redhat.com, lulu@redhat.com,
	parav@mellanox.com, kevin.tian@intel.com, stefanha@redhat.com,
	rdunlap@infradead.org, hch@infradead.org, aadam@redhat.com,
	jiri@mellanox.com, shahafs@mellanox.com, hanand@xilinx.com,
	mhabets@solarflare.com, Jason Wang <jasowang@redhat.com>
Subject: [PATCH V2 4/5] virtio: introduce a vDPA based transport
Date: Mon, 10 Feb 2020 11:56:07 +0800	[thread overview]
Message-ID: <20200210035608.10002-5-jasowang@redhat.com> (raw)
In-Reply-To: <20200210035608.10002-1-jasowang@redhat.com>

This patch introduces a vDPA transport for virtio. This is used to
use kernel virtio driver to drive the mediated device that is capable
of populating virtqueue directly.

A new virtio-vdpa driver will be registered to the vDPA bus, when a
new virtio-vdpa device is probed, it will register the device with
vdpa based config ops. This means it is a software transport between
vDPA driver and vDPA device. The transport was implemented through
bus_ops of vDPA parent.

Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/virtio/Kconfig       |  13 ++
 drivers/virtio/Makefile      |   1 +
 drivers/virtio/virtio_vdpa.c | 392 +++++++++++++++++++++++++++++++++++
 3 files changed, 406 insertions(+)
 create mode 100644 drivers/virtio/virtio_vdpa.c

diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 9c4fdb64d9ac..0df3676b0f4f 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -43,6 +43,19 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_VDPA
+	tristate "vDPA driver for virtio devices"
+        select VDPA
+        select VIRTIO
+	help
+	  This driver provides support for virtio based paravirtual
+	  device driver over vDPA bus. For this to be useful, you need
+	  an appropriate vDPA device implementation that operates on a
+          physical device to allow the datapath of virtio to be
+	  offloaded to hardware.
+
+	  If unsure, say M.
+
 config VIRTIO_PMEM
 	tristate "Support for virtio pmem driver"
 	depends on VIRTIO
diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index fdf5eacd0d0a..3407ac03fe60 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -6,4 +6,5 @@ virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
 virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
 obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
 obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
+obj-$(CONFIG_VIRTIO_VDPA) += virtio_vdpa.o
 obj-$(CONFIG_VDPA) += vdpa/
diff --git a/drivers/virtio/virtio_vdpa.c b/drivers/virtio/virtio_vdpa.c
new file mode 100644
index 000000000000..077796087abf
--- /dev/null
+++ b/drivers/virtio/virtio_vdpa.c
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VIRTIO based driver for vDPA device
+ *
+ * Copyright (c) 2020, Red Hat. All rights reserved.
+ *     Author: Jason Wang <jasowang@redhat.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/uuid.h>
+#include <linux/virtio.h>
+#include <linux/vdpa.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+#define MOD_VERSION  "0.1"
+#define MOD_AUTHOR   "Jason Wang <jasowang@redhat.com>"
+#define MOD_DESC     "vDPA bus driver for virtio devices"
+#define MOD_LICENSE  "GPL v2"
+
+struct virtio_vdpa_device {
+	struct virtio_device vdev;
+	struct vdpa_device *vdpa;
+	u64 features;
+
+	/* The lock to protect virtqueue list */
+	spinlock_t lock;
+	/* List of virtio_vdpa_vq_info */
+	struct list_head virtqueues;
+};
+
+struct virtio_vdpa_vq_info {
+	/* the actual virtqueue */
+	struct virtqueue *vq;
+
+	/* the list node for the virtqueues list */
+	struct list_head node;
+};
+
+static inline struct virtio_vdpa_device *
+to_virtio_vdpa_device(struct virtio_device *dev)
+{
+	return container_of(dev, struct virtio_vdpa_device, vdev);
+}
+
+static struct vdpa_device *vd_get_vdpa(struct virtio_device *vdev)
+{
+	return to_virtio_vdpa_device(vdev)->vdpa;
+}
+
+static void virtio_vdpa_get(struct virtio_device *vdev, unsigned offset,
+			    void *buf, unsigned len)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	ops->get_config(vdpa, offset, buf, len);
+}
+
+static void virtio_vdpa_set(struct virtio_device *vdev, unsigned offset,
+			    const void *buf, unsigned len)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	ops->set_config(vdpa, offset, buf, len);
+}
+
+static u32 virtio_vdpa_generation(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	if (ops->get_generation)
+		return ops->get_generation(vdpa);
+
+	return 0;
+}
+
+static u8 virtio_vdpa_get_status(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return ops->get_status(vdpa);
+}
+
+static void virtio_vdpa_set_status(struct virtio_device *vdev, u8 status)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return ops->set_status(vdpa, status);
+}
+
+static void virtio_vdpa_reset(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return ops->set_status(vdpa, 0);
+}
+
+static bool virtio_vdpa_notify(struct virtqueue *vq)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vq->vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	ops->kick_vq(vdpa, vq->index);
+
+	return true;
+}
+
+static irqreturn_t virtio_vdpa_config_cb(void *private)
+{
+	struct virtio_vdpa_device *vd_dev = private;
+
+	virtio_config_changed(&vd_dev->vdev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t virtio_vdpa_virtqueue_cb(void *private)
+{
+	struct virtio_vdpa_vq_info *info = private;
+
+	return vring_interrupt(0, info->vq);
+}
+
+static struct virtqueue *
+virtio_vdpa_setup_vq(struct virtio_device *vdev, unsigned int index,
+		     void (*callback)(struct virtqueue *vq),
+		     const char *name, bool ctx)
+{
+	struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vdev);
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct virtio_vdpa_vq_info *info;
+	struct vdpa_callback cb;
+	struct virtqueue *vq;
+	u64 desc_addr, driver_addr, device_addr;
+	unsigned long flags;
+	u32 align, num;
+	int err;
+
+	if (!name)
+		return NULL;
+
+	/* Queue shouldn't already be set up. */
+	if (ops->get_vq_ready(vdpa, index))
+		return ERR_PTR(-ENOENT);
+
+	/* Allocate and fill out our active queue description */
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+
+	num = ops->get_vq_num_max(vdpa);
+	if (num == 0) {
+		err = -ENOENT;
+		goto error_new_virtqueue;
+	}
+
+	/* Create the vring */
+	align = ops->get_vq_align(vdpa);
+	vq = vring_create_virtqueue(index, num, align, vdev,
+				    true, true, ctx,
+				    virtio_vdpa_notify, callback, name);
+	if (!vq) {
+		err = -ENOMEM;
+		goto error_new_virtqueue;
+	}
+
+	/* Setup virtqueue callback */
+	cb.callback = virtio_vdpa_virtqueue_cb;
+	cb.private = info;
+	ops->set_vq_cb(vdpa, index, &cb);
+	ops->set_vq_num(vdpa, index, virtqueue_get_vring_size(vq));
+
+	desc_addr = virtqueue_get_desc_addr(vq);
+	driver_addr = virtqueue_get_avail_addr(vq);
+	device_addr = virtqueue_get_used_addr(vq);
+
+	if (ops->set_vq_address(vdpa, index,
+				desc_addr, driver_addr,
+				device_addr)) {
+		err = -EINVAL;
+		goto err_vq;
+	}
+
+	ops->set_vq_ready(vdpa, index, 1);
+
+	vq->priv = info;
+	info->vq = vq;
+
+	spin_lock_irqsave(&vd_dev->lock, flags);
+	list_add(&info->node, &vd_dev->virtqueues);
+	spin_unlock_irqrestore(&vd_dev->lock, flags);
+
+	return vq;
+
+err_vq:
+	vring_del_virtqueue(vq);
+error_new_virtqueue:
+	ops->set_vq_ready(vdpa, index, 0);
+	/* VDPA driver should make sure vq is stopeed here */
+	WARN_ON(ops->get_vq_ready(vdpa, index));
+	kfree(info);
+	return ERR_PTR(err);
+}
+
+static void virtio_vdpa_del_vq(struct virtqueue *vq)
+{
+	struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vq->vdev);
+	struct vdpa_device *vdpa = vd_dev->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct virtio_vdpa_vq_info *info = vq->priv;
+	unsigned int index = vq->index;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vd_dev->lock, flags);
+	list_del(&info->node);
+	spin_unlock_irqrestore(&vd_dev->lock, flags);
+
+	/* Select and deactivate the queue */
+	ops->set_vq_ready(vdpa, index, 0);
+	WARN_ON(ops->get_vq_ready(vdpa, index));
+
+	vring_del_virtqueue(vq);
+
+	kfree(info);
+}
+
+static void virtio_vdpa_del_vqs(struct virtio_device *vdev)
+{
+	struct virtqueue *vq, *n;
+
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+		virtio_vdpa_del_vq(vq);
+}
+
+static int virtio_vdpa_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+				struct virtqueue *vqs[],
+				vq_callback_t *callbacks[],
+				const char * const names[],
+				const bool *ctx,
+				struct irq_affinity *desc)
+{
+	struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vdev);
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct vdpa_callback cb;
+	int i, err, queue_idx = 0;
+
+	for (i = 0; i < nvqs; ++i) {
+		if (!names[i]) {
+			vqs[i] = NULL;
+			continue;
+		}
+
+		vqs[i] = virtio_vdpa_setup_vq(vdev, queue_idx++,
+					      callbacks[i], names[i], ctx ?
+					      ctx[i] : false);
+		if (IS_ERR(vqs[i])) {
+			err = PTR_ERR(vqs[i]);
+			goto err_setup_vq;
+		}
+	}
+
+	cb.callback = virtio_vdpa_config_cb;
+	cb.private = vd_dev;
+	ops->set_config_cb(vdpa, &cb);
+
+	return 0;
+
+err_setup_vq:
+	virtio_vdpa_del_vqs(vdev);
+	return err;
+}
+
+static u64 virtio_vdpa_get_features(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return ops->get_features(vdpa);
+}
+
+static int virtio_vdpa_finalize_features(struct virtio_device *vdev)
+{
+	struct vdpa_device *vdpa = vd_get_vdpa(vdev);
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	/* Give virtio_ring a chance to accept features. */
+	vring_transport_features(vdev);
+
+	return ops->set_features(vdpa, vdev->features);
+}
+
+static const char *virtio_vdpa_bus_name(struct virtio_device *vdev)
+{
+	struct virtio_vdpa_device *vd_dev = to_virtio_vdpa_device(vdev);
+	struct vdpa_device *vdpa = vd_dev->vdpa;
+
+	return dev_name(&vdpa->dev);
+}
+
+static const struct virtio_config_ops virtio_vdpa_config_ops = {
+	.get		= virtio_vdpa_get,
+	.set		= virtio_vdpa_set,
+	.generation	= virtio_vdpa_generation,
+	.get_status	= virtio_vdpa_get_status,
+	.set_status	= virtio_vdpa_set_status,
+	.reset		= virtio_vdpa_reset,
+	.find_vqs	= virtio_vdpa_find_vqs,
+	.del_vqs	= virtio_vdpa_del_vqs,
+	.get_features	= virtio_vdpa_get_features,
+	.finalize_features = virtio_vdpa_finalize_features,
+	.bus_name	= virtio_vdpa_bus_name,
+};
+
+static void virtio_vdpa_release_dev(struct device *_d)
+{
+	struct virtio_device *vdev =
+	       container_of(_d, struct virtio_device, dev);
+	struct virtio_vdpa_device *vd_dev =
+	       container_of(vdev, struct virtio_vdpa_device, vdev);
+
+	kfree(vd_dev);
+}
+
+static int virtio_vdpa_probe(struct vdpa_device *vdpa)
+{
+	const struct vdpa_config_ops *ops = vdpa->config;
+	struct virtio_vdpa_device *vd_dev;
+	int ret = -EINVAL;
+
+	vd_dev = kzalloc(sizeof(*vd_dev), GFP_KERNEL);
+	if (!vd_dev)
+		return -ENOMEM;
+
+	vd_dev->vdev.dev.parent = vdpa_get_dma_dev(vdpa);
+	vd_dev->vdev.dev.release = virtio_vdpa_release_dev;
+	vd_dev->vdev.config = &virtio_vdpa_config_ops;
+	vd_dev->vdpa = vdpa;
+	INIT_LIST_HEAD(&vd_dev->virtqueues);
+	spin_lock_init(&vd_dev->lock);
+
+	vd_dev->vdev.id.device = ops->get_device_id(vdpa);
+	if (vd_dev->vdev.id.device == 0)
+		goto err;
+
+	vd_dev->vdev.id.vendor = ops->get_vendor_id(vdpa);
+	ret = register_virtio_device(&vd_dev->vdev);
+	if (ret)
+		goto err;
+
+	vdpa_set_drvdata(vdpa, vd_dev);
+
+	return 0;
+
+err:
+	kfree(vd_dev);
+	return ret;
+}
+
+static void virtio_vdpa_remove(struct vdpa_device *vdpa)
+{
+	struct virtio_vdpa_device *vd_dev = vdpa_get_drvdata(vdpa);
+
+	unregister_virtio_device(&vd_dev->vdev);
+}
+
+static struct vdpa_driver virtio_vdpa_driver = {
+	.driver = {
+		.name	= "virtio_vdpa",
+	},
+	.probe	= virtio_vdpa_probe,
+	.remove = virtio_vdpa_remove,
+};
+
+module_vdpa_driver(virtio_vdpa_driver);
+
+MODULE_VERSION(MOD_VERSION);
+MODULE_LICENSE(MOD_LICENSE);
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
-- 
2.19.1


  parent reply	other threads:[~2020-02-10  4:01 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-10  3:56 [PATCH V2 0/5] vDPA support Jason Wang
2020-02-10  3:56 ` [PATCH V2 1/5] vhost: factor out IOTLB Jason Wang
2020-02-10  3:56 ` [PATCH V2 2/5] vringh: IOTLB support Jason Wang
2020-02-10  3:56 ` [PATCH V2 3/5] vDPA: introduce vDPA bus Jason Wang
2020-02-11 13:47   ` Jason Gunthorpe
2020-02-12  7:55     ` Jason Wang
2020-02-12 12:51       ` Jason Gunthorpe
2020-02-13  3:34         ` Jason Wang
2020-02-13 13:41           ` Jason Gunthorpe
2020-02-13 14:58             ` Jason Wang
2020-02-13 15:05               ` Jason Gunthorpe
2020-02-13 15:41                 ` Michael S. Tsirkin
2020-02-13 15:51                   ` Jason Gunthorpe
2020-02-13 15:56                     ` Michael S. Tsirkin
2020-02-13 16:24                       ` Jason Gunthorpe
2020-02-14  4:05                         ` Jason Wang
2020-02-14 14:04                           ` Jason Gunthorpe
2020-02-17  6:07                             ` Jason Wang
2020-02-13 15:59                     ` Michael S. Tsirkin
2020-02-13 16:13                       ` Jason Gunthorpe
2020-02-14  4:39                         ` Jason Wang
2020-02-14  3:23                 ` Jason Wang
2020-02-14 13:52                   ` Jason Gunthorpe
2020-02-17  6:08                     ` Jason Wang
2020-02-18 13:56                       ` Jason Gunthorpe
2020-02-19  2:59                         ` Tiwei Bie
2020-02-19  5:35                         ` Jason Wang
2020-02-19 12:53                           ` Jason Gunthorpe
2020-02-10  3:56 ` Jason Wang [this message]
2020-02-10 13:34   ` [PATCH V2 4/5] virtio: introduce a vDPA based transport Jason Gunthorpe
2020-02-11  3:04     ` Jason Wang
2020-02-10  3:56 ` [PATCH V2 5/5] vdpasim: vDPA device simulator Jason Wang
2020-02-10 11:23   ` Michael S. Tsirkin
2020-02-11  3:12     ` Jason Wang
2020-02-11 13:52   ` Jason Gunthorpe
2020-02-12  8:27     ` Jason Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200210035608.10002-5-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=aadam@redhat.com \
    --cc=cunming.liang@intel.com \
    --cc=eperezma@redhat.com \
    --cc=hanand@xilinx.com \
    --cc=haotian.wang@sifive.com \
    --cc=hch@infradead.org \
    --cc=jgg@mellanox.com \
    --cc=jiri@mellanox.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=lingshan.zhu@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lulu@redhat.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=mhabets@solarflare.com \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=parav@mellanox.com \
    --cc=rdunlap@infradead.org \
    --cc=rob.miller@broadcom.com \
    --cc=shahafs@mellanox.com \
    --cc=stefanha@redhat.com \
    --cc=tiwei.bie@intel.com \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=xiao.w.wang@intel.com \
    --cc=zhihong.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).