From: <max.chou@realtek.com>
To: <marcel@holtmann.org>
Cc: <johan.hedberg@gmail.com>, <linux-bluetooth@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <alex_lu@realsil.com.cn>,
<hildawu@realtek.com>, <kidman@realtek.com>
Subject: [PATCH v2] Bluetooth: hci_h5: btrtl: Add support for RTL8822C
Date: Mon, 17 Feb 2020 16:14:55 +0800 [thread overview]
Message-ID: <20200217081455.30938-1-max.chou@realtek.com> (raw)
From: Max Chou <max.chou@realtek.com>
Add new compatible and FW loading support for RTL8822C.
Signed-off-by: Max Chou <max.chou@realtek.com>
---
Changes in v2:
- Separate the code description for ACPI and OF
- Note that forgiving my less experience, I can not find bt3wire.c from the
upstream. I just find hci_h5.c can support Realtek Bluetooth controller,
so I modify the code here for new chip support.
---
drivers/bluetooth/Kconfig | 2 +-
drivers/bluetooth/btrtl.c | 12 ++++++++++++
drivers/bluetooth/hci_h5.c | 19 +++++++++++++++++++
3 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index f7aa2dc1ff85..052020b07e56 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -211,7 +211,7 @@ config BT_HCIUART_RTL
depends on BT_HCIUART
depends on BT_HCIUART_SERDEV
depends on GPIOLIB
- depends on ACPI
+ depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
select BT_HCIUART_3WIRE
select BT_RTL
help
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 577cfa3329db..67f4bc21e7c5 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -136,6 +136,18 @@ static const struct id_table ic_id_table[] = {
.fw_name = "rtl_bt/rtl8761a_fw.bin",
.cfg_name = "rtl_bt/rtl8761a_config" },
+ /* 8822C with UART interface */
+ { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
+ IC_MATCH_FL_HCIBUS,
+ .lmp_subver = RTL_ROM_LMP_8822B,
+ .hci_rev = 0x000c,
+ .hci_ver = 0x0a,
+ .hci_bus = HCI_UART,
+ .config_needed = true,
+ .has_rom_version = true,
+ .fw_name = "rtl_bt/rtl8822cs_fw.bin",
+ .cfg_name = "rtl_bt/rtl8822cs_config" },
+
/* 8822C with USB interface */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xc),
.config_needed = false,
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 0b14547482a7..4e4d58a73295 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -11,6 +11,7 @@
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
#include <linux/serdev.h>
#include <linux/skbuff.h>
@@ -786,6 +787,7 @@ static const struct hci_uart_proto h5p = {
static int h5_serdev_probe(struct serdev_device *serdev)
{
const struct acpi_device_id *match;
+ const void *data;
struct device *dev = &serdev->dev;
struct h5 *h5;
@@ -810,8 +812,15 @@ static int h5_serdev_probe(struct serdev_device *serdev)
if (h5->vnd->acpi_gpio_map)
devm_acpi_dev_add_driver_gpios(dev,
h5->vnd->acpi_gpio_map);
+ } else {
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -ENODEV;
+
+ h5->vnd = (const struct h5_vnd *)data;
}
+
h5->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(h5->enable_gpio))
return PTR_ERR(h5->enable_gpio);
@@ -1003,6 +1012,15 @@ static const struct dev_pm_ops h5_serdev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(h5_serdev_suspend, h5_serdev_resume)
};
+static const struct of_device_id rtl_bluetooth_of_match[] = {
+#ifdef CONFIG_BT_HCIUART_RTL
+ { .compatible = "realtek,rtl8822cs-bt",
+ .data = (const void *)&rtl_vnd },
+#endif
+ { },
+};
+MODULE_DEVICE_TABLE(of, rtl_bluetooth_of_match);
+
static struct serdev_device_driver h5_serdev_driver = {
.probe = h5_serdev_probe,
.remove = h5_serdev_remove,
@@ -1010,6 +1028,7 @@ static struct serdev_device_driver h5_serdev_driver = {
.name = "hci_uart_h5",
.acpi_match_table = ACPI_PTR(h5_acpi_match),
.pm = &h5_serdev_pm_ops,
+ .of_match_table = rtl_bluetooth_of_match,
},
};
--
2.17.1
next reply other threads:[~2020-02-17 8:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-17 8:14 max.chou [this message]
2020-02-18 8:26 ` [PATCH v2] Bluetooth: hci_h5: btrtl: Add support for RTL8822C Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200217081455.30938-1-max.chou@realtek.com \
--to=max.chou@realtek.com \
--cc=alex_lu@realsil.com.cn \
--cc=hildawu@realtek.com \
--cc=johan.hedberg@gmail.com \
--cc=kidman@realtek.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).