linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Torgue <alexandre.torgue@st.com>
To: Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
	<marex@denx.de>
Subject: [PATCH v2 2/2] pinctrl: stm32: Add level interrupt support to gpio irq chip
Date: Tue, 18 Feb 2020 14:12:18 +0100	[thread overview]
Message-ID: <20200218131218.10789-3-alexandre.torgue@st.com> (raw)
In-Reply-To: <20200218131218.10789-1-alexandre.torgue@st.com>

This patch adds level interrupt support to gpio irq chip.

GPIO hardware block is directly linked to EXTI block but EXTI handles
external interrupts only on edge. To be able to handle GPIO interrupt on
level a "hack" is done in gpio irq chip: parent interrupt (exti irq chip)
is retriggered following interrupt type and gpio line value.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Tested-by: Marek Vasut <marex@denx.de>

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 2d5e0435af0a..dae236562543 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -92,6 +92,7 @@ struct stm32_gpio_bank {
 	u32 bank_nr;
 	u32 bank_ioport_nr;
 	u32 pin_backup[STM32_GPIO_PINS_PER_BANK];
+	u32 irq_type[STM32_GPIO_PINS_PER_BANK];
 };
 
 struct stm32_pinctrl {
@@ -303,6 +304,46 @@ static const struct gpio_chip stm32_gpio_template = {
 	.get_direction		= stm32_gpio_get_direction,
 };
 
+void stm32_gpio_irq_eoi(struct irq_data *d)
+{
+	struct stm32_gpio_bank *bank = d->domain->host_data;
+	int line;
+
+	irq_chip_eoi_parent(d);
+
+	/* If level interrupt type then retrig */
+	line = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
+	if ((line == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
+	    (line == 1 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_HIGH))
+		irq_chip_retrigger_hierarchy(d);
+};
+
+static int stm32_gpio_set_type(struct irq_data *d, unsigned int type)
+{
+	struct stm32_gpio_bank *bank = d->domain->host_data;
+	u32 parent_type;
+
+	bank->irq_type[d->hwirq] = type;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_EDGE_BOTH:
+		parent_type = type;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		parent_type = IRQ_TYPE_EDGE_RISING;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		parent_type = IRQ_TYPE_EDGE_FALLING;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return irq_chip_set_type_parent(d, parent_type);
+};
+
 static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
 {
 	struct stm32_gpio_bank *bank = irq_data->domain->host_data;
@@ -332,11 +373,11 @@ static void stm32_gpio_irq_release_resources(struct irq_data *irq_data)
 
 static struct irq_chip stm32_gpio_irq_chip = {
 	.name		= "stm32gpio",
-	.irq_eoi	= irq_chip_eoi_parent,
+	.irq_eoi	= stm32_gpio_irq_eoi,
 	.irq_ack	= irq_chip_ack_parent,
 	.irq_mask	= irq_chip_mask_parent,
 	.irq_unmask	= irq_chip_unmask_parent,
-	.irq_set_type	= irq_chip_set_type_parent,
+	.irq_set_type	= stm32_gpio_set_type,
 	.irq_set_wake	= irq_chip_set_wake_parent,
 	.irq_request_resources = stm32_gpio_irq_request_resources,
 	.irq_release_resources = stm32_gpio_irq_release_resources,
-- 
2.17.1


  parent reply	other threads:[~2020-02-18 13:13 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-18 13:12 [PATCH v2 0/2] Add GPIO level-sensitive interrupt support Alexandre Torgue
2020-02-18 13:12 ` [PATCH v2 1/2] irqchip/stm32: Add irq retrigger support Alexandre Torgue
2020-02-18 17:51   ` Marek Vasut
2020-02-19 11:33   ` Alexandre Torgue
2020-02-19 11:43     ` Marc Zyngier
2020-02-19 13:07       ` Alexandre Torgue
2020-02-19 13:13         ` Marc Zyngier
2020-02-19 13:17           ` Alexandre Torgue
2020-02-18 13:12 ` Alexandre Torgue [this message]
2020-02-18 17:51   ` [PATCH v2 2/2] pinctrl: stm32: Add level interrupt support to gpio irq chip Marek Vasut
2020-02-19 11:34   ` Alexandre Torgue
2020-02-19 12:07     ` Marc Zyngier
2020-02-19 12:59       ` Alexandre Torgue
2020-02-18 16:25 ` [PATCH v2 0/2] Add GPIO level-sensitive interrupt support Marek Vasut
2020-02-18 18:10   ` Alexandre Torgue
2020-02-18 18:13     ` Marek Vasut
2020-02-19  9:20       ` Alexandre Torgue
2020-02-19 17:24         ` Marek Vasut
2020-02-20 13:09           ` Alexandre Torgue
2020-02-21 16:41             ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200218131218.10789-3-alexandre.torgue@st.com \
    --to=alexandre.torgue@st.com \
    --cc=jason@lakedaemon.net \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=marex@denx.de \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).