From: Baoquan He <bhe@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org, akpm@linux-foundation.org,
richardw.yang@linux.intel.com, david@redhat.com,
osalvador@suse.de, dan.j.williams@intel.com, mhocko@suse.com,
bhe@redhat.com
Subject: [PATCH v2 RESEND] mm/sparsemem: pfn_to_page is not valid yet on SPARSEMEM
Date: Wed, 19 Feb 2020 11:04:54 +0800 [thread overview]
Message-ID: <20200219030454.4844-1-bhe@redhat.com> (raw)
From: Wei Yang <richardw.yang@linux.intel.com>
When we use SPARSEMEM instead of SPARSEMEM_VMEMMAP, pfn_to_page()
doesn't work before sparse_init_one_section() is called. This leads to a
crash when hotplug memory:
[ 41.839170] BUG: unable to handle page fault for address: 0000000006400000
[ 41.840663] #PF: supervisor write access in kernel mode
[ 41.841822] #PF: error_code(0x0002) - not-present page
[ 41.842970] PGD 0 P4D 0
[ 41.843538] Oops: 0002 [#1] SMP PTI
[ 41.844125] CPU: 3 PID: 221 Comm: kworker/u16:1 Tainted: G W 5.5.0-next-20200205+ #343
[ 41.845659] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[ 41.846977] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[ 41.847904] RIP: 0010:__memset+0x24/0x30
[ 41.848660] Code: cc cc cc cc cc cc 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 f3
[ 41.851836] RSP: 0018:ffffb43ac0373c80 EFLAGS: 00010a87
[ 41.852686] RAX: ffffffffffffffff RBX: ffff8a1518800000 RCX: 0000000000050000
[ 41.853824] RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000006400000
[ 41.854967] RBP: 0000000000140000 R08: 0000000000100000 R09: 0000000006400000
[ 41.856107] R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000
[ 41.857255] R13: 0000000000000028 R14: 0000000000000000 R15: ffff8a153ffd9280
[ 41.858414] FS: 0000000000000000(0000) GS:ffff8a153ab00000(0000) knlGS:0000000000000000
[ 41.859703] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 41.860627] CR2: 0000000006400000 CR3: 0000000136fca000 CR4: 00000000000006e0
[ 41.861716] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 41.862680] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 41.863628] Call Trace:
[ 41.863983] sparse_add_section+0x1c9/0x26a
[ 41.864570] __add_pages+0xbf/0x150
[ 41.865057] add_pages+0x12/0x60
[ 41.865489] add_memory_resource+0xc8/0x210
[ 41.866017] ? wake_up_q+0xa0/0xa0
[ 41.866416] __add_memory+0x62/0xb0
[ 41.866825] acpi_memory_device_add+0x13f/0x300
[ 41.867410] acpi_bus_attach+0xf6/0x200
[ 41.867890] acpi_bus_scan+0x43/0x90
[ 41.868448] acpi_device_hotplug+0x275/0x3d0
[ 41.868972] acpi_hotplug_work_fn+0x1a/0x30
[ 41.869473] process_one_work+0x1a7/0x370
[ 41.869953] worker_thread+0x30/0x380
[ 41.870396] ? flush_rcu_work+0x30/0x30
[ 41.870846] kthread+0x112/0x130
[ 41.871236] ? kthread_create_on_node+0x60/0x60
[ 41.871770] ret_from_fork+0x35/0x40
We should use memmap as it did.
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
---
v1->v2:
Add trace printed by triggered bug to log.
v1 can be found here:
http://lkml.kernel.org/r/20200206125343.9070-1-richardw.yang@linux.intel.com
mm/sparse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/sparse.c b/mm/sparse.c
index c184b69460b7..596b2a45b100 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -876,7 +876,7 @@ int __meminit sparse_add_section(int nid, unsigned long start_pfn,
* Poison uninitialized struct pages in order to catch invalid flags
* combinations.
*/
- page_init_poison(pfn_to_page(start_pfn), sizeof(struct page) * nr_pages);
+ page_init_poison(memmap, sizeof(struct page) * nr_pages);
ms = __nr_to_section(section_nr);
set_section_nid(section_nr, nid);
--
2.17.2
next reply other threads:[~2020-02-19 3:05 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 3:04 Baoquan He [this message]
2020-02-19 3:25 ` [PATCH v2 RESEND] mm/sparsemem: pfn_to_page is not valid yet on SPARSEMEM Dan Williams
2020-02-19 3:46 ` Baoquan He
2020-02-19 8:57 ` Mike Rapoport
2020-02-19 16:37 ` Dan Williams
2020-02-19 18:31 ` Mike Rapoport
2020-02-19 19:50 ` Andrew Morton
2020-02-19 20:13 ` Dan Williams
2020-02-19 21:45 ` Wei Yang
2020-02-19 23:55 ` Baoquan He
2020-02-20 10:41 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200219030454.4844-1-bhe@redhat.com \
--to=bhe@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
--cc=richardw.yang@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).