From: peng.fan@nxp.com
To: ohad@wizery.com, bjorn.andersson@linaro.org, robh+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com
Cc: linux-imx@nxp.com, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH 6/9] remoteproc: imx_proc: enable virtio/mailbox
Date: Wed, 19 Feb 2020 15:27:42 +0800 [thread overview]
Message-ID: <1582097265-20170-7-git-send-email-peng.fan@nxp.com> (raw)
In-Reply-To: <1582097265-20170-1-git-send-email-peng.fan@nxp.com>
From: Peng Fan <peng.fan@nxp.com>
Use virtio/mailbox to build connection between Remote Proccessors
and Linux. Add delayed work to handle incoming messages.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/remoteproc/imx_rproc.c | 106 +++++++++++++++++++++++++++++++++++++++--
1 file changed, 102 insertions(+), 4 deletions(-)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index e31ea1090cf3..36dec1ce4f50 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -7,14 +7,18 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/remoteproc.h>
+#include "remoteproc_internal.h"
+
#define IMX7D_SRC_SCR 0x0C
#define IMX7D_ENABLE_M4 BIT(3)
#define IMX7D_SW_M4P_RST BIT(2)
@@ -87,6 +91,10 @@ struct imx_rproc {
struct imx_rproc_mem mem[IMX7D_RPROC_MEM_MAX];
struct clk *clk;
bool early_boot;
+ struct mbox_client cl;
+ struct mbox_chan *tx_ch;
+ struct mbox_chan *rx_ch;
+ struct delayed_work rproc_work;
};
static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
@@ -402,9 +410,25 @@ static u32 imx_rproc_elf_get_boot_addr(struct rproc *rproc,
return 0;
}
+static void imx_rproc_kick(struct rproc *rproc, int vqid)
+{
+ struct imx_rproc *priv = rproc->priv;
+ int err;
+ __u32 mmsg;
+
+ mmsg = vqid << 16;
+
+ priv->cl.tx_tout = 20;
+ err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+ if (err < 0)
+ dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
+ __func__, vqid, err);
+}
+
static const struct rproc_ops imx_rproc_ops = {
.start = imx_rproc_start,
.stop = imx_rproc_stop,
+ .kick = imx_rproc_kick,
.da_to_va = imx_rproc_da_to_va,
.load = imx_rproc_elf_load_segments,
.parse_fw = imx_rproc_parse_fw,
@@ -503,6 +527,67 @@ static int imx_rproc_configure_mode(struct imx_rproc *priv)
return 0;
}
+static void imx_rproc_vq_work(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct imx_rproc *priv = container_of(dwork, struct imx_rproc,
+ rproc_work);
+
+ rproc_vq_interrupt(priv->rproc, 0);
+ rproc_vq_interrupt(priv->rproc, 1);
+}
+
+static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
+{
+ struct rproc *rproc = dev_get_drvdata(cl->dev);
+ struct imx_rproc *priv = rproc->priv;
+
+ schedule_delayed_work(&(priv->rproc_work), 0);
+}
+
+static int imx_rproc_xtr_mbox_init(struct rproc *rproc)
+{
+ struct imx_rproc *priv = rproc->priv;
+ struct device *dev = priv->dev;
+ struct mbox_client *cl;
+ int ret = 0;
+
+ cl = &priv->cl;
+ cl->dev = dev;
+ cl->tx_block = true;
+ cl->tx_tout = 20;
+ cl->knows_txdone = false;
+ cl->rx_callback = imx_rproc_rx_callback;
+
+ priv->tx_ch = mbox_request_channel_byname(cl, "tx");
+ if (IS_ERR(priv->tx_ch)) {
+ if (PTR_ERR(priv->tx_ch) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ ret = PTR_ERR(priv->tx_ch);
+ dev_dbg(cl->dev, "failed to request mbox tx chan, ret %d\n",
+ ret);
+ goto err_out;
+ }
+
+ priv->rx_ch = mbox_request_channel_byname(cl, "rx");
+ if (IS_ERR(priv->rx_ch)) {
+ ret = PTR_ERR(priv->rx_ch);
+ dev_dbg(cl->dev, "failed to request mbox rx chan, ret %d\n",
+ ret);
+ goto err_out;
+ }
+
+ return ret;
+
+err_out:
+ if (!IS_ERR(priv->tx_ch))
+ mbox_free_channel(priv->tx_ch);
+ if (!IS_ERR(priv->rx_ch))
+ mbox_free_channel(priv->rx_ch);
+
+ return ret;
+}
+
static int imx_rproc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -543,22 +628,28 @@ static int imx_rproc_probe(struct platform_device *pdev)
dev_set_drvdata(dev, rproc);
+ ret = imx_rproc_xtr_mbox_init(rproc);
+ if (ret) {
+ if (ret == -EPROBE_DEFER)
+ goto err_put_rproc;
+ }
+
ret = imx_rproc_configure_mode(priv);
if (ret)
- goto err_put_rproc;
+ goto err_put_mbox;
if (!priv->early_boot) {
ret = imx_rproc_addr_init(priv, pdev);
if (ret) {
dev_err(dev, "failed on imx_rproc_addr_init\n");
- goto err_put_rproc;
+ goto err_put_mbox;
}
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk)) {
dev_err(dev, "Failed to get clock\n");
ret = PTR_ERR(priv->clk);
- goto err_put_rproc;
+ goto err_put_mbox;
}
/*
@@ -568,10 +659,12 @@ static int imx_rproc_probe(struct platform_device *pdev)
ret = clk_prepare_enable(priv->clk);
if (ret) {
dev_err(&rproc->dev, "Failed to enable clock\n");
- goto err_put_rproc;
+ goto err_put_mbox;
}
}
+ INIT_DELAYED_WORK(&(priv->rproc_work), imx_rproc_vq_work);
+
ret = rproc_add(rproc);
if (ret) {
dev_err(dev, "rproc_add failed\n");
@@ -583,6 +676,11 @@ static int imx_rproc_probe(struct platform_device *pdev)
err_put_clk:
if (!priv->early_boot)
clk_disable_unprepare(priv->clk);
+err_put_mbox:
+ if (!IS_ERR(priv->tx_ch))
+ mbox_free_channel(priv->tx_ch);
+ if (!IS_ERR(priv->rx_ch))
+ mbox_free_channel(priv->rx_ch);
err_put_rproc:
rproc_free(rproc);
--
2.16.4
next prev parent reply other threads:[~2020-02-19 7:34 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 7:27 [PATCH 0/9] remoteproc: imx_rproc: support i.MX8/8M/7ULP peng.fan
2020-02-19 7:27 ` [PATCH 1/9] dt-bindings: remoteproc: Convert imx-rproc to json-schema peng.fan
2020-02-19 14:09 ` Rob Herring
2020-02-19 14:34 ` Peng Fan
2020-02-20 0:37 ` Rob Herring
2020-02-19 7:27 ` [PATCH 2/9] dt-bindings: remoteproc: imx-rproc: support i.MX[8,8M,7ULP] peng.fan
2020-02-19 7:27 ` [PATCH 3/9] remoteproc: add support to skip firmware load when recovery peng.fan
2020-02-19 14:39 ` Arnaud POULIQUEN
2020-02-19 15:40 ` Peng Fan
2020-02-20 8:49 ` Arnaud POULIQUEN
2020-02-21 18:42 ` Mathieu Poirier
2020-02-23 0:01 ` Peng Fan
2020-02-19 7:27 ` [PATCH 4/9] remoteproc: imx_rproc: surport early booted remote processor peng.fan
2020-02-21 21:16 ` Mathieu Poirier
2020-02-23 0:05 ` Peng Fan
2020-02-19 7:27 ` [PATCH 5/9] remoteproc: imx_rproc: parse early-booted property peng.fan
2020-02-21 21:56 ` Mathieu Poirier
2020-02-23 0:11 ` Peng Fan
2020-02-19 7:27 ` peng.fan [this message]
2020-02-19 7:27 ` [PATCH 7/9] remoteproc: imx_rproc: add i.MX8QM/QXP peng.fan
2020-02-19 7:27 ` [PATCH 8/9] remoteproc: imx_rproc: support i.MX7ULP peng.fan
2020-02-19 7:27 ` [PATCH 9/9] remoteproc: imx_rproc: add i.MX8MM support peng.fan
2020-02-19 18:24 ` [PATCH 0/9] remoteproc: imx_rproc: support i.MX8/8M/7ULP Mathieu Poirier
2020-02-20 1:36 ` Peng Fan
2020-02-20 21:25 ` Mathieu Poirier
2020-02-21 1:35 ` Peng Fan
2020-02-21 6:51 ` Oleksij Rempel
2020-02-21 6:56 ` Peng Fan
2020-02-21 7:03 ` Uwe Kleine-König
2020-02-21 7:08 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582097265-20170-7-git-send-email-peng.fan@nxp.com \
--to=peng.fan@nxp.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).