From: Ansuel Smith <ansuelsmth@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Ansuel Smith <ansuelsmth@gmail.com>,
Adrian Panella <ianchi74@outlook.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] regulator: add smb208 support
Date: Wed, 19 Feb 2020 17:37:11 +0100 [thread overview]
Message-ID: <20200219163711.479-1-ansuelsmth@gmail.com> (raw)
Smb208 regulators are used on some ipq806x soc.
Add support for it to make it avaiable on some routers
that use it.
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
2 files changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 3c91ad430eea..b823b8625243 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
"qcom,rpm-pm8018-regulators"
+ "qcom,rpm-smb208-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018:
s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l14, lvs1
+smb208:
+ s1a, s1b, s2a, s2b
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index 7407cd5a1b74..7fc97f23fcf4 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -925,12 +925,21 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
{ }
};
+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
+ { }
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8018-regulators",
.data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
--
2.25.0
next reply other threads:[~2020-02-19 16:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 16:37 Ansuel Smith [this message]
2020-02-26 11:38 ` [PATCH] regulator: add smb208 support Lee Jones
2020-02-26 15:37 ` Rob Herring
2020-02-26 18:48 ` Applied "regulator: add smb208 support" to the regulator tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200219163711.479-1-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ianchi74@outlook.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).