From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 03/70] drivers/serial/: remove CVS keywords
Date: Fri, 20 Jun 2008 20:58:33 +0100 [thread overview]
Message-ID: <20080620195825.1479.99809.stgit@localhost.localdomain> (raw)
In-Reply-To: <20080620195406.1479.12620.stgit@localhost.localdomain>
From: Adrian Bunk <bunk@kernel.org>
This patch removes CVS keywords that weren't updated for a long time in
comments, printk's and MODULE_DESCRIPTION's (no printk's or
MODULE_DESCRIPTION's are completely removed).
While doing this I also found and fixed a missing \n in a printk
in m32r_sio.c
Signed-off-by: Adrian Bunk <bunk@kernel.org>
---
drivers/serial/21285.c | 6 ++----
drivers/serial/8250.c | 6 ++----
drivers/serial/8250.h | 2 --
drivers/serial/8250_pci.c | 2 --
drivers/serial/8250_pnp.c | 2 --
drivers/serial/Kconfig | 2 --
drivers/serial/Makefile | 2 --
drivers/serial/amba-pl010.c | 6 ++----
drivers/serial/amba-pl011.c | 2 --
drivers/serial/clps711x.c | 7 ++-----
drivers/serial/cpm_uart/cpm_uart_core.c | 4 ++--
drivers/serial/m32r_sio.c | 4 ++--
drivers/serial/mpsc.c | 4 ++--
drivers/serial/pnx8xxx_uart.c | 2 +-
drivers/serial/sa1100.c | 7 ++-----
drivers/serial/sunsu.c | 2 +-
16 files changed, 18 insertions(+), 42 deletions(-)
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 0276471..1b6b83c 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -4,8 +4,6 @@
* Driver for the serial port on the 21285 StrongArm-110 core logic chip.
*
* Based on drivers/char/serial.c
- *
- * $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
*/
#include <linux/module.h>
#include <linux/tty.h>
@@ -494,7 +492,7 @@ static int __init serial21285_init(void)
{
int ret;
- printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n");
+ printk(KERN_INFO "Serial: 21285 driver\n");
serial21285_setup_ports();
@@ -515,5 +513,5 @@ module_init(serial21285_init);
module_exit(serial21285_exit);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $");
+MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver");
MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1bc00b7..b040912 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -12,8 +12,6 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $
- *
* A note about mapbase / membase
*
* mapbase is the physical address of the IO port.
@@ -2931,7 +2929,7 @@ static int __init serial8250_init(void)
if (nr_uarts > UART_NR)
nr_uarts = UART_NR;
- printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ "
+ printk(KERN_INFO "Serial: 8250/16550 driver"
"%d ports, IRQ sharing %sabled\n", nr_uarts,
share_irqs ? "en" : "dis");
@@ -2992,7 +2990,7 @@ EXPORT_SYMBOL(serial8250_suspend_port);
EXPORT_SYMBOL(serial8250_resume_port);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $");
+MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
module_param(share_irqs, uint, 0644);
MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 91bd28f..78c0016 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -11,8 +11,6 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- * $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
*/
#include <linux/serial_8250.h>
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 788c355..1b36087 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -10,8 +10,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
- *
- * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 97c68d0..ec522b3 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -12,8 +12,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
- *
- * $Id: 8250_pnp.c,v 1.10 2002/07/21 21:32:30 rmk Exp $
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9bc4276..76b1c62 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1,8 +1,6 @@
#
# Serial device configuration
#
-# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $
-#
menu "Serial drivers"
depends on HAS_IOMEM
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 0d9c09b..34e89a4 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -1,8 +1,6 @@
#
# Makefile for the kernel serial device drivers.
#
-# $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
-#
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e88da72..0df6e40 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -22,8 +22,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
- *
* This is a generic driver for ARM AMBA-type serial ports. They
* have a lot of 16550-like features, but are not register compatible.
* Note that although they do have CTS, DCD and DSR inputs, they do
@@ -791,7 +789,7 @@ static int __init pl010_init(void)
{
int ret;
- printk(KERN_INFO "Serial: AMBA driver $Revision: 1.41 $\n");
+ printk(KERN_INFO "Serial: AMBA driver\n");
ret = uart_register_driver(&amba_reg);
if (ret == 0) {
@@ -812,5 +810,5 @@ module_init(pl010_init);
module_exit(pl010_exit);
MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("ARM AMBA serial port driver $Revision: 1.41 $");
+MODULE_DESCRIPTION("ARM AMBA serial port driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 08adc1d..8b5aa0b 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -22,8 +22,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
- *
* This is a generic driver for ARM AMBA-type serial ports. They
* have a lot of 16550-like features, but are not register compatible.
* Note that although they do have CTS, DCD and DSR inputs, they do
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 2382718..c6495f7 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -21,9 +21,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * $Id: clps711x.c,v 1.42 2002/07/28 10:03:28 rmk Exp $
- *
*/
#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -551,7 +548,7 @@ static int __init clps711xuart_init(void)
{
int ret, i;
- printk(KERN_INFO "Serial: CLPS711x driver $Revision: 1.42 $\n");
+ printk(KERN_INFO "Serial: CLPS711x driver\n");
ret = uart_register_driver(&clps711x_reg);
if (ret)
@@ -577,6 +574,6 @@ module_init(clps711xuart_init);
module_exit(clps711xuart_exit);
MODULE_AUTHOR("Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("CLPS-711x generic serial driver $Revision: 1.42 $");
+MODULE_DESCRIPTION("CLPS-711x generic serial driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a19dc7e..74935a5 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -1530,7 +1530,7 @@ static int cpm_uart_init(void) {
int ret;
int i;
struct device *dev;
- printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
+ printk(KERN_INFO "Serial: CPM driver\n");
/* lookup the bus for uart devices */
dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
@@ -1591,6 +1591,6 @@ module_init(cpm_uart_init);
module_exit(cpm_uart_exit);
MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis");
-MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $");
+MODULE_DESCRIPTION("CPM SCC/SMC port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR);
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index c2bb11c..60a95bb 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -1160,7 +1160,7 @@ static int __init m32r_sio_init(void)
{
int ret, i;
- printk(KERN_INFO "Serial: M32R SIO driver $Revision: 1.11 $ ");
+ printk(KERN_INFO "Serial: M32R SIO driver\n");
for (i = 0; i < NR_IRQS; i++)
spin_lock_init(&irq_lists[i].lock);
@@ -1189,4 +1189,4 @@ EXPORT_SYMBOL(m32r_sio_suspend_port);
EXPORT_SYMBOL(m32r_sio_resume_port);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic M32R SIO serial driver $Revision: 1.11 $");
+MODULE_DESCRIPTION("Generic M32R SIO serial driver");
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index e8819c4..da596e7 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -1972,7 +1972,7 @@ static int __init mpsc_drv_init(void)
{
int rc;
- printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n");
+ printk(KERN_INFO "Serial: MPSC driver\n");
memset(mpsc_ports, 0, sizeof(mpsc_ports));
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
@@ -2004,7 +2004,7 @@ module_init(mpsc_drv_init);
module_exit(mpsc_drv_exit);
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
-MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $");
+MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver");
MODULE_VERSION(MPSC_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index d0e5a79..1ba5917 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -824,7 +824,7 @@ static int __init pnx8xxx_serial_init(void)
{
int ret;
- printk(KERN_INFO "Serial: PNX8XXX driver $Revision: 1.2 $\n");
+ printk(KERN_INFO "Serial: PNX8XXX driver\n");
pnx8xxx_init_ports();
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 62b3858..f3cf7fe 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -20,9 +20,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * $Id: sa1100.c,v 1.50 2002/07/29 14:41:04 rmk Exp $
- *
*/
#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -892,7 +889,7 @@ static int __init sa1100_serial_init(void)
{
int ret;
- printk(KERN_INFO "Serial: SA11x0 driver $Revision: 1.50 $\n");
+ printk(KERN_INFO "Serial: SA11x0 driver\n");
sa1100_init_ports();
@@ -915,7 +912,7 @@ module_init(sa1100_serial_init);
module_exit(sa1100_serial_exit);
MODULE_AUTHOR("Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("SA1100 generic serial port driver $Revision: 1.50 $");
+MODULE_DESCRIPTION("SA1100 generic serial port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR);
MODULE_ALIAS("platform:sa11x0-uart");
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 03806a9..1074e73 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1,4 +1,4 @@
-/* $Id: su.c,v 1.55 2002/01/08 16:00:16 davem Exp $
+/*
* su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
next prev parent reply other threads:[~2008-06-20 20:16 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-20 19:57 [PATCH 00/70] tty updates proposed for 2.6.27 Alan Cox
2008-06-20 19:58 ` [PATCH 01/70] tty: Ldisc revamp Alan Cox
2008-06-23 13:39 ` Louis Rilling
2008-06-23 14:11 ` Alan Cox
2008-06-20 19:58 ` [PATCH 02/70] drivers/char/rio/: remove VCS tags Alan Cox
2008-06-20 19:58 ` Alan Cox [this message]
2008-06-20 19:58 ` [PATCH 04/70] tty: Introduce a tty_port common structure Alan Cox
2008-06-20 19:58 ` [PATCH 05/70] tty.h: clean up Alan Cox
2008-06-20 19:59 ` [PATCH 06/70] epca: use tty_port Alan Cox
2008-06-20 19:59 ` [PATCH 07/70] esp: " Alan Cox
2008-06-20 19:59 ` [PATCH 08/70] gs: " Alan Cox
2008-06-20 19:59 ` [PATCH 09/70] riscom8: " Alan Cox
2008-06-20 19:59 ` [PATCH 10/70] riscom8: remove bogus checks Alan Cox
2008-06-20 19:59 ` [PATCH 11/70] isicom: use tty_port Alan Cox
2008-06-20 19:59 ` [PATCH 12/70] istallion: " Alan Cox
2008-06-20 19:59 ` [PATCH 13/70] moxa: " Alan Cox
2008-06-20 19:59 ` [PATCH 14/70] mxser: " Alan Cox
2008-06-20 20:00 ` [PATCH 15/70] rocket: " Alan Cox
2008-06-20 20:00 ` [PATCH 16/70] serial: " Alan Cox
2008-06-20 20:00 ` [PATCH 17/70] stallion: " Alan Cox
2008-06-20 20:00 ` [PATCH 18/70] synclink: " Alan Cox
2008-06-20 20:00 ` [PATCH 19/70] tty: Clean up tiocmset Alan Cox
2008-06-20 20:00 ` [PATCH 20/70] cyclades: use tty_port Alan Cox
2008-06-20 20:00 ` [PATCH 21/70] termios: Termios defines for other platforms Alan Cox
2008-06-20 20:00 ` [PATCH 22/70] tty: add more tty_port fields Alan Cox
2008-06-20 20:01 ` [PATCH 24/70] whiteheat: coding style Alan Cox
2008-06-20 20:01 ` [PATCH 25/70] whiteheat: fix bugs found in the tidy and audit Alan Cox
2008-06-20 20:01 ` [PATCH 26/70] belkin_sa: clean up code Alan Cox
2008-06-20 20:01 ` [PATCH 27/70] usb-serial-bus: tidy coding style Alan Cox
2008-06-20 20:01 ` [PATCH 28/70] tty-usb-console: tidy the USB console code Alan Cox
2008-06-20 20:01 ` [PATCH 29/70] tty-usb-console: Fix termios Alan Cox
2008-06-20 20:02 ` [PATCH 30/70] cp2101: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 31/70] cyberjack: Coding style Alan Cox
2008-06-20 20:02 ` [PATCH 32/70] cypress_m8: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 33/70] usb-cypress: There is no 0 case to go with CS5/6/7/8 so remove the test Alan Cox
2008-06-20 20:02 ` [PATCH 34/70] digi_acceleport: coding style Alan Cox
2008-06-20 20:02 ` [PATCH 35/70] empeg: Coding style Alan Cox
2008-06-20 20:02 ` [PATCH 36/70] ftdi_sio: " Alan Cox
2008-06-20 20:02 ` [PATCH 37/70] funsoft: Switch to linux/uaccess Alan Cox
2008-06-20 20:03 ` [PATCH 38/70] garmin_gps: Coding style Alan Cox
2008-06-20 20:03 ` [PATCH 39/70] tty-usb-generic: Code cleanup Alan Cox
2008-06-20 20:03 ` [PATCH 40/70] tty-usb-hp4x: Fix overlong line Alan Cox
2008-06-20 20:03 ` [PATCH 41/70] tty-usb-visor: Coding style Alan Cox
2008-06-20 20:03 ` [PATCH 42/70] tty-usb-io_edgeport: " Alan Cox
2008-06-20 20:03 ` [PATCH 43/70] io_edgeport: Fix various bogus returns to the tty layer Alan Cox
2008-06-20 20:03 ` [PATCH 44/70] usb-serial: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 45/70] io_ti: Minor coding style Alan Cox
2008-06-20 20:04 ` [PATCH 46/70] ipaq: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 47/70] tty-usb-ipw: " Alan Cox
2008-06-20 20:04 ` [PATCH 48/70] tty-usb-ir-usb: Clean up to coding style Alan Cox
2008-06-20 20:04 ` [PATCH 49/70] tty-usb-iuu-phoenix: " Alan Cox
2008-06-20 20:04 ` [PATCH 50/70] tty-usb-keyspan: Coding style Alan Cox
2008-06-20 20:04 ` [PATCH 51/70] keyspan: Use string flip functions when possible Alan Cox
2008-06-20 20:04 ` [PATCH 52/70] tty-usb-keyspan-pda: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 53/70] tty-usb-kl5kusb105: " Alan Cox
2008-06-20 20:05 ` [PATCH 54/70] keyspan_pda: Use string flip functions Alan Cox
2008-06-20 20:05 ` [PATCH 55/70] tty-usb-kobil-sct: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 56/70] kobil_sct: Fix ioctls Alan Cox
2008-06-20 20:05 ` [PATCH 57/70] tty-usb-mct-u232: Coding style Alan Cox
2008-06-20 20:05 ` [PATCH 58/70] mct_u232: Use flip buffer functions Alan Cox
2008-06-20 20:06 ` [PATCH 59/70] tty-usb-pl2303: Coding style Alan Cox
2008-06-20 20:06 ` [PATCH 60/70] tty-usb-sierra: Coding style - minor Alan Cox
2008-06-20 20:06 ` [PATCH 61/70] tty-usb-spcp8x5: Minor coding style Alan Cox
2008-06-20 20:06 ` [PATCH 62/70] tty-usb-ti-usb: Coding style Alan Cox
2008-06-20 20:06 ` [PATCH 63/70] tty-usb-safe-serial: " Alan Cox
2008-06-20 20:06 ` [PATCH 64/70] tty-usb-oti6858: " Alan Cox
2008-06-20 20:06 ` [PATCH 65/70] tty-usb-option: " Alan Cox
2008-06-20 20:06 ` [PATCH 66/70] tty-usb-omninet: " Alan Cox
2008-06-20 20:07 ` [PATCH 67/70] omninet: Use string flip functions Alan Cox
2008-06-20 20:07 ` [PATCH 68/70] mos7840: remove loads of bogus assignments to status Alan Cox
2008-06-20 20:07 ` [PATCH 69/70] whiteheat: remove unused variable Alan Cox
2008-06-20 20:07 ` [PATCH 70/70] tty-usb-mos7720: Coding style Alan Cox
2008-06-20 23:39 ` [PATCH 00/70] tty updates proposed for 2.6.27 Johannes Weiner
2008-06-21 9:09 ` Greg KH
2008-06-21 10:17 ` (Resend of 23/70 plus reply [PATCH 00/70] tty updates proposed for 2.6.27) Alan Cox
2008-06-21 11:19 ` Adrian Bunk
2008-06-22 17:07 ` Alan Cox
2008-06-22 18:39 ` Greg KH
2008-06-21 13:23 ` [PATCH 00/70] tty updates proposed for 2.6.27 Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080620195825.1479.99809.stgit@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).