From: Li Yang <leoyang.li@nxp.com>
To: shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH 01/15] arm64: defconfig: run through savedefconfig for ordering
Date: Mon, 24 Feb 2020 17:07:56 -0600 [thread overview]
Message-ID: <1582585690-463-2-git-send-email-leoyang.li@nxp.com> (raw)
In-Reply-To: <1582585690-463-1-git-send-email-leoyang.li@nxp.com>
Used "make defconfig savedefconfig" to regenerate defconfig files in the
right order to prepare for additional defconfig changes.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/configs/defconfig | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 0f212889c931..618001ef5c81 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -471,9 +471,9 @@ CONFIG_DW_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=m
CONFIG_IMX2_WDT=y
CONFIG_IMX_SC_WDT=m
+CONFIG_QCOM_WDT=m
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
-CONFIG_QCOM_WDT=m
CONFIG_RENESAS_WDT=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_BCM2835_WDT=y
@@ -594,8 +594,8 @@ CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m
CONFIG_I2C_HID=m
-CONFIG_USB=y
CONFIG_USB_CONN_GPIO=m
+CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_TEGRA=y
@@ -617,7 +617,6 @@ CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_RENESAS_USB3=m
@@ -756,7 +755,6 @@ CONFIG_OWL_PM_DOMAINS=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_IMX_SCU_SOC=y
CONFIG_QCOM_AOSS_QMP=y
-CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_GLINK_SSR=m
CONFIG_QCOM_RMTFS_MEM=m
@@ -771,14 +769,12 @@ CONFIG_ARCH_R8A774A1=y
CONFIG_ARCH_R8A774B1=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A7795=y
-CONFIG_ARCH_R8A7796=y
CONFIG_ARCH_R8A77961=y
CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77970=y
CONFIG_ARCH_R8A77980=y
CONFIG_ARCH_R8A77990=y
CONFIG_ARCH_R8A77995=y
-CONFIG_QCOM_PDC=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
@@ -809,6 +805,7 @@ CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_SUN4I=m
CONFIG_PWM_TEGRA=m
+CONFIG_QCOM_PDC=y
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=m
CONFIG_RESET_TI_SCI=y
@@ -880,16 +877,16 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_DEV_SUN8I_CE=m
CONFIG_CRYPTO_DEV_FSL_CAAM=m
-CONFIG_CRYPTO_DEV_HISI_ZIP=m
-CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_DEV_QCOM_RNG=m
+CONFIG_CRYPTO_DEV_HISI_ZIP=m
CONFIG_CMA_SIZE_MBYTES=32
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
--
2.17.1
next prev parent reply other threads:[~2020-02-24 23:08 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 23:07 [PATCH 00/15] Enable drivers for NXP/FSL QorIQ arm64 boards Li Yang
2020-02-24 23:07 ` Li Yang [this message]
2020-02-24 23:07 ` [PATCH 02/15] arm64: defconfig: Enable NXP flexcan driver Li Yang
2020-02-24 23:07 ` [PATCH 03/15] arm64: defconfig: Enable QorIQ DPAA1 drivers Li Yang
2020-02-24 23:07 ` [PATCH 04/15] arm64: defconfig: Enable QorIQ DPAA2 drivers Li Yang
2020-02-24 23:08 ` [PATCH 05/15] arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch Li Yang
2020-02-24 23:08 ` [PATCH 06/15] arm64: defconfig: Enable NXP/FSL SPI controller drivers Li Yang
2020-03-11 5:51 ` Shawn Guo
[not found] ` <CADRPPNQ-VWmVMdBuEUj9RdXAYvt4dhy+scP-EaYbrXj3McSaVQ@mail.gmail.com>
2020-03-11 7:06 ` Shawn Guo
2020-02-24 23:08 ` [PATCH 07/15] arm64: defconfig: Enable QorIQ cpufreq driver Li Yang
2020-03-11 6:12 ` Shawn Guo
2020-03-11 18:54 ` Leo Li
2020-03-12 14:22 ` Shawn Guo
2020-03-12 16:31 ` Leo Li
2020-02-24 23:08 ` [PATCH 08/15] arm64: defconfig: Enable ARM SBSA watchdog driver Li Yang
2020-02-24 23:08 ` [PATCH 09/15] arm64: defconfig: Enable QorIQ IFC NAND controller driver Li Yang
2020-03-11 6:13 ` Shawn Guo
2020-03-11 18:55 ` Leo Li
2020-02-24 23:08 ` [PATCH 10/15] arm64: defconfig: Enable QorIQ GPIO driver Li Yang
2020-02-24 23:08 ` [PATCH 11/15] arm64: defconfig: Enable ARM Mali display driver Li Yang
2020-02-24 23:08 ` [PATCH 12/15] arm64: defconfig: Enable flash device drivers for QorIQ boards Li Yang
2020-02-24 23:08 ` [PATCH 13/15] arm64: defconfig: Enable RTC devices " Li Yang
2020-02-24 23:08 ` [PATCH 14/15] arm64: defconfig: Enable PHY devices used on " Li Yang
2020-02-24 23:08 ` [PATCH 15/15] arm64: defconfig: Enable e1000 device Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582585690-463-2-git-send-email-leoyang.li@nxp.com \
--to=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).