From: peng.fan@nxp.com
To: sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
festevam@gmail.com, abel.vesa@nxp.com
Cc: kernel@pengutronix.de, linux-imx@nxp.com, Anson.Huang@nxp.com,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
leonard.crestez@nxp.com, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH 1/3] clk: imx: imx8mp: fix pll mux bit
Date: Tue, 25 Feb 2020 15:49:17 +0800 [thread overview]
Message-ID: <1582616959-933-1-git-send-email-peng.fan@nxp.com> (raw)
From: Peng Fan <peng.fan@nxp.com>
Same to i.MX8MN/i.MX8MM, pll BYPASS bit should be kept inside pll
driver for glitchless freq setting following spec. If exposing the
bit, that means pll driver and clk driver has two paths to touch
this bit, which is wrong.
So use EXT_BYPASS bit here.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/clk/imx/clk-imx8mp.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index 7d558d6334eb..a85039cfdbf1 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -486,16 +486,16 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
hws[IMX8MP_SYS_PLL2] = imx_clk_hw_pll14xx("sys_pll2", "sys_pll2_ref_sel", anatop_base + 0x104, &imx_1416x_pll);
hws[IMX8MP_SYS_PLL3] = imx_clk_hw_pll14xx("sys_pll3", "sys_pll3_ref_sel", anatop_base + 0x114, &imx_1416x_pll);
- hws[IMX8MP_AUDIO_PLL1_BYPASS] = imx_clk_hw_mux_flags("audio_pll1_bypass", anatop_base, 4, 1, audio_pll1_bypass_sels, ARRAY_SIZE(audio_pll1_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_AUDIO_PLL2_BYPASS] = imx_clk_hw_mux_flags("audio_pll2_bypass", anatop_base + 0x14, 4, 1, audio_pll2_bypass_sels, ARRAY_SIZE(audio_pll2_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_VIDEO_PLL1_BYPASS] = imx_clk_hw_mux_flags("video_pll1_bypass", anatop_base + 0x28, 4, 1, video_pll1_bypass_sels, ARRAY_SIZE(video_pll1_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_DRAM_PLL_BYPASS] = imx_clk_hw_mux_flags("dram_pll_bypass", anatop_base + 0x50, 4, 1, dram_pll_bypass_sels, ARRAY_SIZE(dram_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_GPU_PLL_BYPASS] = imx_clk_hw_mux_flags("gpu_pll_bypass", anatop_base + 0x64, 4, 1, gpu_pll_bypass_sels, ARRAY_SIZE(gpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_VPU_PLL_BYPASS] = imx_clk_hw_mux_flags("vpu_pll_bypass", anatop_base + 0x74, 4, 1, vpu_pll_bypass_sels, ARRAY_SIZE(vpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_ARM_PLL_BYPASS] = imx_clk_hw_mux_flags("arm_pll_bypass", anatop_base + 0x84, 4, 1, arm_pll_bypass_sels, ARRAY_SIZE(arm_pll_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_SYS_PLL1_BYPASS] = imx_clk_hw_mux_flags("sys_pll1_bypass", anatop_base + 0x94, 4, 1, sys_pll1_bypass_sels, ARRAY_SIZE(sys_pll1_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_SYS_PLL2_BYPASS] = imx_clk_hw_mux_flags("sys_pll2_bypass", anatop_base + 0x104, 4, 1, sys_pll2_bypass_sels, ARRAY_SIZE(sys_pll2_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX8MP_SYS_PLL3_BYPASS] = imx_clk_hw_mux_flags("sys_pll3_bypass", anatop_base + 0x114, 4, 1, sys_pll3_bypass_sels, ARRAY_SIZE(sys_pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_AUDIO_PLL1_BYPASS] = imx_clk_hw_mux_flags("audio_pll1_bypass", anatop_base, 16, 1, audio_pll1_bypass_sels, ARRAY_SIZE(audio_pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_AUDIO_PLL2_BYPASS] = imx_clk_hw_mux_flags("audio_pll2_bypass", anatop_base + 0x14, 16, 1, audio_pll2_bypass_sels, ARRAY_SIZE(audio_pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_VIDEO_PLL1_BYPASS] = imx_clk_hw_mux_flags("video_pll1_bypass", anatop_base + 0x28, 16, 1, video_pll1_bypass_sels, ARRAY_SIZE(video_pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_DRAM_PLL_BYPASS] = imx_clk_hw_mux_flags("dram_pll_bypass", anatop_base + 0x50, 16, 1, dram_pll_bypass_sels, ARRAY_SIZE(dram_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_GPU_PLL_BYPASS] = imx_clk_hw_mux_flags("gpu_pll_bypass", anatop_base + 0x64, 28, 1, gpu_pll_bypass_sels, ARRAY_SIZE(gpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_VPU_PLL_BYPASS] = imx_clk_hw_mux_flags("vpu_pll_bypass", anatop_base + 0x74, 28, 1, vpu_pll_bypass_sels, ARRAY_SIZE(vpu_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_ARM_PLL_BYPASS] = imx_clk_hw_mux_flags("arm_pll_bypass", anatop_base + 0x84, 28, 1, arm_pll_bypass_sels, ARRAY_SIZE(arm_pll_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_SYS_PLL1_BYPASS] = imx_clk_hw_mux_flags("sys_pll1_bypass", anatop_base + 0x94, 28, 1, sys_pll1_bypass_sels, ARRAY_SIZE(sys_pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_SYS_PLL2_BYPASS] = imx_clk_hw_mux_flags("sys_pll2_bypass", anatop_base + 0x104, 28, 1, sys_pll2_bypass_sels, ARRAY_SIZE(sys_pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ hws[IMX8MP_SYS_PLL3_BYPASS] = imx_clk_hw_mux_flags("sys_pll3_bypass", anatop_base + 0x114, 28, 1, sys_pll3_bypass_sels, ARRAY_SIZE(sys_pll3_bypass_sels), CLK_SET_RATE_PARENT);
hws[IMX8MP_AUDIO_PLL1_OUT] = imx_clk_hw_gate("audio_pll1_out", "audio_pll1_bypass", anatop_base, 13);
hws[IMX8MP_AUDIO_PLL2_OUT] = imx_clk_hw_gate("audio_pll2_out", "audio_pll2_bypass", anatop_base + 0x14, 13);
--
2.16.4
next reply other threads:[~2020-02-25 7:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 7:49 peng.fan [this message]
2020-02-25 7:49 ` [PATCH 2/3] clk: imx: imx8mp: mark sys_pll1/2 as fixed clock peng.fan
2020-02-25 8:27 ` Jacky Bai
2020-02-25 7:49 ` [PATCH 3/3] clk: imx8mp: Define gates for pll1/2 fixed dividers peng.fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582616959-933-1-git-send-email-peng.fan@nxp.com \
--to=peng.fan@nxp.com \
--cc=Anson.Huang@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).