From: Kishon Vijay Abraham I <kishon@ti.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Arnd Bergmann <arnd@arndb.de>,
Andrew Murray <amurray@thegoodpenguin.co.uk>,
Kishon Vijay Abraham I <kishon@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Alan Mikhak <alan.mikhak@sifive.com>, <linux-pci@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 5/5] misc: pci_endpoint_test: Add support to get DMA option from userspace
Date: Tue, 25 Feb 2020 14:41:30 +0530 [thread overview]
Message-ID: <20200225091130.29467-6-kishon@ti.com> (raw)
In-Reply-To: <20200225091130.29467-1-kishon@ti.com>
'pcitest' utility now uses '-d' option to allow the user to test DMA.
Add support to parse option to use DMA from userspace application.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/misc/pci_endpoint_test.c | 65 ++++++++++++++++++++++++++++++--
1 file changed, 62 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 5998df1c84e9..3f102356b600 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -17,6 +17,7 @@
#include <linux/mutex.h>
#include <linux/random.h>
#include <linux/slab.h>
+#include <linux/uaccess.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
@@ -52,6 +53,7 @@
#define STATUS_SRC_ADDR_INVALID BIT(7)
#define STATUS_DST_ADDR_INVALID BIT(8)
+#define PCI_ENDPOINT_TEST_STATUS 0x8
#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0x0c
#define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR 0x10
@@ -64,6 +66,9 @@
#define PCI_ENDPOINT_TEST_IRQ_TYPE 0x24
#define PCI_ENDPOINT_TEST_IRQ_NUMBER 0x28
+#define PCI_ENDPOINT_TEST_FLAGS 0x2c
+#define FLAG_USE_DMA BIT(0)
+
#define PCI_DEVICE_ID_TI_AM654 0xb00c
#define is_am654_pci_dev(pdev) \
@@ -315,11 +320,16 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
return false;
}
-static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
+static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
+ unsigned long arg)
{
+ struct pci_endpoint_test_xfer_param param;
bool ret = false;
void *src_addr;
void *dst_addr;
+ u32 flags = 0;
+ bool use_dma;
+ size_t size;
dma_addr_t src_phys_addr;
dma_addr_t dst_phys_addr;
struct pci_dev *pdev = test->pdev;
@@ -332,10 +342,22 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
size_t alignment = test->alignment;
u32 src_crc32;
u32 dst_crc32;
+ int err;
+
+ err = copy_from_user(¶m, (void *)arg, sizeof(param));
+ if (err) {
+ dev_err(dev, "Failed to get transfer param\n");
+ return false;
+ }
+ size = param.size;
if (size > SIZE_MAX - alignment)
goto err;
+ use_dma = param.use_dma;
+ if (use_dma)
+ flags |= FLAG_USE_DMA;
+
if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
dev_err(dev, "Invalid IRQ type option\n");
goto err;
@@ -406,6 +428,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE,
size);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
@@ -434,9 +457,13 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
return ret;
}
-static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
+static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
+ unsigned long arg)
{
+ struct pci_endpoint_test_xfer_param param;
bool ret = false;
+ u32 flags = 0;
+ bool use_dma;
u32 reg;
void *addr;
dma_addr_t phys_addr;
@@ -446,11 +473,24 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
dma_addr_t orig_phys_addr;
size_t offset;
size_t alignment = test->alignment;
+ size_t size;
u32 crc32;
+ int err;
+ err = copy_from_user(¶m, (void *)arg, sizeof(param));
+ if (err != 0) {
+ dev_err(dev, "Failed to get transfer param\n");
+ return false;
+ }
+
+ size = param.size;
if (size > SIZE_MAX - alignment)
goto err;
+ use_dma = param.use_dma;
+ if (use_dma)
+ flags |= FLAG_USE_DMA;
+
if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
dev_err(dev, "Invalid IRQ type option\n");
goto err;
@@ -493,6 +533,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
@@ -514,9 +555,14 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
return ret;
}
-static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
+static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
+ unsigned long arg)
{
+ struct pci_endpoint_test_xfer_param param;
bool ret = false;
+ u32 flags = 0;
+ bool use_dma;
+ size_t size;
void *addr;
dma_addr_t phys_addr;
struct pci_dev *pdev = test->pdev;
@@ -526,10 +572,22 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
size_t offset;
size_t alignment = test->alignment;
u32 crc32;
+ int err;
+ err = copy_from_user(¶m, (void *)arg, sizeof(param));
+ if (err) {
+ dev_err(dev, "Failed to get transfer param\n");
+ return false;
+ }
+
+ size = param.size;
if (size > SIZE_MAX - alignment)
goto err;
+ use_dma = param.use_dma;
+ if (use_dma)
+ flags |= FLAG_USE_DMA;
+
if (irq_type < IRQ_TYPE_LEGACY || irq_type > IRQ_TYPE_MSIX) {
dev_err(dev, "Invalid IRQ type option\n");
goto err;
@@ -566,6 +624,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_FLAGS, flags);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
--
2.17.1
next prev parent reply other threads:[~2020-02-25 9:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 9:11 [PATCH 0/5] PCI: functions/pci-epf-test: Add DMA data transfer Kishon Vijay Abraham I
2020-02-25 9:11 ` [PATCH 1/5] PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data Kishon Vijay Abraham I
2020-02-25 9:11 ` [PATCH 2/5] PCI: endpoint: functions/pci-epf-test: Print throughput information Kishon Vijay Abraham I
2020-02-25 9:11 ` [PATCH 3/5] misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation Kishon Vijay Abraham I
2020-02-25 9:11 ` [PATCH 4/5] tools: PCI: Add 'd' command line option to support DMA Kishon Vijay Abraham I
2020-02-25 9:11 ` Kishon Vijay Abraham I [this message]
2020-02-25 21:11 ` [PATCH 1/5] PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data Alan Mikhak
2020-02-26 5:09 ` Kishon Vijay Abraham I
2020-02-26 17:39 ` Alan Mikhak
2020-03-03 23:57 ` Alan Mikhak
2020-03-04 5:15 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200225091130.29467-6-kishon@ti.com \
--to=kishon@ti.com \
--cc=alan.mikhak@sifive.com \
--cc=amurray@thegoodpenguin.co.uk \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).