From: Michael Walle <michael@walle.cc>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Li Yang <leoyang.li@nxp.com>,
Michael Walle <michael@walle.cc>
Subject: [PATCH 3/3] arm64: dts: ls1028a: sl28: add support for variant 2
Date: Tue, 25 Feb 2020 18:57:56 +0100 [thread overview]
Message-ID: <20200225175756.29508-4-michael@walle.cc> (raw)
In-Reply-To: <20200225175756.29508-1-michael@walle.cc>
Now that there is support for the Felix switch this variant can also be
added. It features two external ports ethernet ports which are connected
to the internal switch core. No direct connection to any of the enetc's
is supported.
Signed-off-by: Michael Walle <michael@walle.cc>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../fsl-ls1028a-kontron-sl28-var2.dts | 68 +++++++++++++++++++
2 files changed, 69 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0d36c6e64574..c04bfa72d83e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
new file mode 100644
index 000000000000..0a34ff682027
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has two ethernet ports. These
+ * ports are connected to the internal switch.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+ model = "Kontron SMARC-sAL28 (TSN-on-module)";
+ compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+ phy0: ethernet-phy@5 {
+ reg = <0x5>;
+ eee-broken-1000t;
+ eee-broken-100tx;
+ };
+
+ phy1: ethernet-phy@4 {
+ reg = <0x4>;
+ eee-broken-1000t;
+ eee-broken-100tx;
+ };
+};
+
+&enetc_port0 {
+ status = "disabled";
+ /*
+ * In the base device tree the PHY was registered in the mdio
+ * subnode as it is PHY for this port. On this module this PHY
+ * is connected to a switch port instead and registered above.
+ * Therefore, delete the mdio subnode as well as the phy-handle
+ * property here.
+ */
+ /delete-property/ phy-handle;
+ /delete-node/ mdio;
+};
+
+&enetc_port2 {
+ status = "okay";
+};
+
+&mscc_felix_port0 {
+ label = "gbe0";
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+&mscc_felix_port1 {
+ label = "gbe1";
+ phy-handle = <&phy1>;
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+&mscc_felix_port4 {
+ ethernet = <&enetc_port2>;
+ status = "okay";
+};
--
2.20.1
prev parent reply other threads:[~2020-02-25 17:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 17:57 [PATCH 0/3] arm64: dts: ls1028a: various sl28 fixes/updates Michael Walle
2020-02-25 17:57 ` [PATCH 1/3] arm64: dts: ls1028a: sl28: fix on-board EEPROMS Michael Walle
2020-03-11 7:16 ` Shawn Guo
2020-03-11 7:28 ` Michael Walle
2020-02-25 17:57 ` [PATCH 2/3] arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS Michael Walle
2020-02-25 17:57 ` Michael Walle [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200225175756.29508-4-michael@walle.cc \
--to=michael@walle.cc \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).