linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Berger <stefanb@linux.vnet.ibm.com>
To: jarkko.sakkinen@linux.intel.com, linux-integrity@vger.kernel.org
Cc: aik@ozlabs.ru, david@gibson.dropbear.id.au,
	linux-kernel@vger.kernel.org, nayna@linux.vnet.ibm.com,
	gcwilson@linux.ibm.com, jgg@ziepe.ca,
	Stefan Berger <stefanb@linux.ibm.com>
Subject: [PATCH v3 3/4] tpm: Implement tpm2_init_commands to use in non-auto startup case
Date: Tue, 25 Feb 2020 15:53:04 -0500	[thread overview]
Message-ID: <20200225205305.3948001-4-stefanb@linux.vnet.ibm.com> (raw)
In-Reply-To: <20200225205305.3948001-1-stefanb@linux.vnet.ibm.com>

From: Stefan Berger <stefanb@linux.ibm.com>

The IBM vTPM device driver will not use TPM_OPS_AUTO_STARTUP since we
assume the firmware has initialized the TPM 2 and TPM2_Startup() need
not be sent. Therefore, tpm2_auto_startup() will not be called. To cover
the tpm_chip's initialization of timeouts, command durations, and
command attributes we implement tpm2_init_commands() function that will
be called instead of tpm2_auto_startup().

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
---
 drivers/char/tpm/tpm-interface.c |  5 ++++-
 drivers/char/tpm/tpm.h           |  1 +
 drivers/char/tpm/tpm2-cmd.c      | 14 ++++++++++++++
 3 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index a438b1206fcb..30d80b94db33 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -371,8 +371,11 @@ int tpm_auto_startup(struct tpm_chip *chip)
 {
 	int rc;
 
-	if (!(chip->ops->flags & TPM_OPS_AUTO_STARTUP))
+	if (!(chip->ops->flags & TPM_OPS_AUTO_STARTUP)) {
+		if (chip->flags & TPM_CHIP_FLAG_TPM2)
+			return tpm2_init_commands(chip);
 		return 0;
+	}
 
 	if (chip->flags & TPM_CHIP_FLAG_TPM2)
 		rc = tpm2_auto_startup(chip);
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 5620747da0cf..30da942d714a 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -222,6 +222,7 @@ ssize_t tpm2_get_tpm_pt(struct tpm_chip *chip, u32 property_id,
 			u32 *value, const char *desc);
 
 ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip);
+int tpm2_init_commands(struct tpm_chip *chip);
 int tpm2_auto_startup(struct tpm_chip *chip);
 void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type);
 unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
index 13696deceae8..2d0c5a3b65c0 100644
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -709,6 +709,20 @@ static int tpm2_startup(struct tpm_chip *chip)
 	return rc;
 }
 
+/**
+ * tpm2_init_commands - Get timeouts, durations and command code attributes
+ *                      in case tpm2_auto_startup is not used.
+ * @chip: TPM chip to use
+ *
+ * Return 0 on success, < 0 in case of fatal error.
+ */
+int tpm2_init_commands(struct tpm_chip *chip)
+{
+	tpm2_get_timeouts(chip);
+
+	return tpm2_get_cc_attrs_tbl(chip);
+}
+
 /**
  * tpm2_auto_startup - Perform the standard automatic TPM initialization
  *                     sequence
-- 
2.23.0


  parent reply	other threads:[~2020-02-25 20:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 20:53 [PATCH v3 0/4] Enable vTPM 2.0 for the IBM vTPM driver Stefan Berger
2020-02-25 20:53 ` [PATCH v3 1/4] tpm: of: Handle IBM,vtpm20 case when getting log parameters Stefan Berger
2020-02-25 20:53 ` [PATCH v3 2/4] tpm: ibmvtpm: Wait for buffer to be set before proceeding Stefan Berger
2020-02-25 20:53 ` Stefan Berger [this message]
2020-02-25 20:53 ` [PATCH v3 4/4] tpm: ibmvtpm: Add support for TPM 2 Stefan Berger
2020-02-27  0:26 [PATCH v3 0/4] Enable vTPM 2.0 for the IBM vTPM driver Stefan Berger
2020-02-27  0:26 ` [PATCH v3 3/4] tpm: Implement tpm2_init_commands to use in non-auto startup case Stefan Berger
2020-02-27 16:02   ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225205305.3948001-4-stefanb@linux.vnet.ibm.com \
    --to=stefanb@linux.vnet.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=david@gibson.dropbear.id.au \
    --cc=gcwilson@linux.ibm.com \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgg@ziepe.ca \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nayna@linux.vnet.ibm.com \
    --cc=stefanb@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).