linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: peng.fan@nxp.com
To: sudeep.holla@arm.com, robh+dt@kernel.org, mark.rutland@arm.com,
	robh@kernel.org
Cc: viresh.kumar@linaro.org, f.fainelli@gmail.com, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	andre.przywara@arm.com, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH V3 2/2] firmware: arm_scmi: add smc/hvc transport
Date: Wed, 26 Feb 2020 15:12:51 +0800	[thread overview]
Message-ID: <1582701171-26842-3-git-send-email-peng.fan@nxp.com> (raw)
In-Reply-To: <1582701171-26842-1-git-send-email-peng.fan@nxp.com>

From: Peng Fan <peng.fan@nxp.com>

Take arm,smc-id as the 1st arg, and protocol id as the 2nd arg when
issuing SMC/HVC. Since we need protocol id, so add this parameter
to scmi_chan_info, then smc transport driver could directly use it.
There is no Rx, only Tx because of smc/hvc not support Rx.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/firmware/arm_scmi/Makefile |   2 +-
 drivers/firmware/arm_scmi/common.h |   3 +
 drivers/firmware/arm_scmi/driver.c |   2 +
 drivers/firmware/arm_scmi/smc.c    | 146 +++++++++++++++++++++++++++++++++++++
 4 files changed, 152 insertions(+), 1 deletion(-)
 create mode 100644 drivers/firmware/arm_scmi/smc.c

diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 6694d0d908d6..6b1b0d6c6d0e 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -2,6 +2,6 @@
 obj-y	= scmi-bus.o scmi-driver.o scmi-protocols.o scmi-transport.o
 scmi-bus-y = bus.o
 scmi-driver-y = driver.o
-scmi-transport-y = mailbox.o shmem.o
+scmi-transport-y = mailbox.o shmem.o smc.o
 scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
 obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 5ac06469b01c..8cf330809e9e 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -162,11 +162,13 @@ int scmi_base_protocol_init(struct scmi_handle *h);
  *	 channel
  * @handle: Pointer to SCMI entity handle
  * @transport_info: Transport layer related information
+ * @prot_id: The id of the protocol that will use this channel
  */
 struct scmi_chan_info {
 	struct device *dev;
 	struct scmi_handle *handle;
 	void *transport_info;
+	int prot_id;
 };
 
 /**
@@ -210,6 +212,7 @@ struct scmi_desc {
 };
 
 extern const struct scmi_desc scmi_mailbox_desc;
+extern const struct scmi_desc scmi_smc_desc;
 
 void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr);
 void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index dbec767222e9..3715aecd0fc1 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -606,6 +606,7 @@ static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
 		return ret;
 	}
 
+	cinfo->prot_id = prot_id;
 	cinfo->handle = &info->handle;
 	return 0;
 }
@@ -827,6 +828,7 @@ ATTRIBUTE_GROUPS(versions);
 /* Each compatible listed below must have descriptor associated with it */
 static const struct of_device_id scmi_of_match[] = {
 	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
 	{ /* Sentinel */ },
 };
 
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
new file mode 100644
index 000000000000..58d5f44fa77b
--- /dev/null
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message SMC/HVC
+ * Transport driver
+ *
+ * Copyright 2020 NXP
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+/**
+ * struct scmi_smc - Structure representing a SCMI smc transport
+ *
+ * @cinfo: SCMI channel info
+ * @shmem: Transmit/Receive shared memory area
+ * @func_id: smc/hvc call function id
+ */
+
+struct scmi_smc {
+	struct scmi_chan_info *cinfo;
+	struct scmi_shared_mem __iomem *shmem;
+	u32 func_id;
+};
+
+static bool smc_chan_available(struct device *dev, int idx)
+{
+	return true;
+}
+
+static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
+			  bool tx)
+{
+	struct device *cdev = cinfo->dev;
+	struct scmi_smc *scmi_info;
+	resource_size_t size;
+	struct resource res;
+	struct device_node *np;
+	u32 func_id;
+	int ret;
+
+	if (!tx)
+		return -ENODEV;
+
+	scmi_info = devm_kzalloc(dev, sizeof(*scmi_info), GFP_KERNEL);
+	if (!scmi_info)
+		return -ENOMEM;
+
+	np = of_parse_phandle(cdev->of_node, "shmem", 0);
+	if (!np)
+		np = of_parse_phandle(dev->of_node, "shmem", 0);
+	ret = of_address_to_resource(np, 0, &res);
+	of_node_put(np);
+	if (ret) {
+		dev_err(cdev, "failed to get SCMI Tx shared memory\n");
+		return ret;
+	}
+
+	size = resource_size(&res);
+	scmi_info->shmem = devm_ioremap(dev, res.start, size);
+	if (!scmi_info->shmem) {
+		dev_err(dev, "failed to ioremap SCMI Tx shared memory\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "arm,smc-id", &func_id);
+	if (ret < 0)
+		return ret;
+
+	scmi_info->func_id = func_id;
+	scmi_info->cinfo = cinfo;
+	cinfo->transport_info = scmi_info;
+
+	return 0;
+}
+
+static int smc_chan_free(int id, void *p, void *data)
+{
+	struct scmi_chan_info *cinfo = p;
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	cinfo->transport_info = NULL;
+	scmi_info->cinfo = NULL;
+
+	scmi_free_channel(cinfo, data, id);
+
+	return 0;
+}
+
+static int smc_send_message(struct scmi_chan_info *cinfo,
+			    struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+	struct arm_smccc_res res;
+
+	shmem_tx_prepare(scmi_info->shmem, xfer);
+
+	arm_smccc_1_1_invoke(scmi_info->func_id, cinfo->prot_id, 0, 0, 0,
+			     0, 0, 0, &res);
+	scmi_rx_callback(scmi_info->cinfo, shmem_read_header(scmi_info->shmem));
+
+	return res.a0;
+}
+
+static void smc_mark_txdone(struct scmi_chan_info *cinfo, int ret)
+{
+}
+
+static void smc_fetch_response(struct scmi_chan_info *cinfo,
+			       struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	shmem_fetch_response(scmi_info->shmem, xfer);
+}
+
+static bool
+smc_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	return shmem_poll_done(scmi_info->shmem, xfer);
+}
+
+static struct scmi_transport_ops scmi_smc_ops = {
+	.chan_available = smc_chan_available,
+	.chan_setup = smc_chan_setup,
+	.chan_free = smc_chan_free,
+	.send_message = smc_send_message,
+	.mark_txdone = smc_mark_txdone,
+	.fetch_response = smc_fetch_response,
+	.poll_done = smc_poll_done,
+};
+
+const struct scmi_desc scmi_smc_desc = {
+	.ops = &scmi_smc_ops,
+	.max_rx_timeout_ms = 30,
+	.max_msg = 1,
+	.max_msg_size = 128,
+};
-- 
2.16.4


  parent reply	other threads:[~2020-02-26  7:19 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-26  7:12 [PATCH V3 0/2] firmware: arm_scmi: add smc/hvc transports support peng.fan
2020-02-26  7:12 ` [PATCH V3 1/2] dt-bindings: arm: arm,scmi: add smc/hvc transport peng.fan
2020-02-26  7:12 ` peng.fan [this message]
2020-02-28 16:18   ` [PATCH V3 2/2] firmware: arm_scmi: " Sudeep Holla
2020-02-29  2:07     ` Peng Fan
2020-03-02 11:21       ` Sudeep Holla
2020-03-02 13:40         ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1582701171-26842-3-git-send-email-peng.fan@nxp.com \
    --to=peng.fan@nxp.com \
    --cc=andre.przywara@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).