linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ionela Voinescu <ionela.voinescu@arm.com>
To: catalin.marinas@arm.com, will@kernel.org, mark.rutland@arm.com,
	maz@kernel.org, suzuki.poulose@arm.com, sudeep.holla@arm.com,
	lukasz.luba@arm.com, valentin.schneider@arm.com,
	dietmar.eggemann@arm.com, rjw@rjwysocki.net,
	pkondeti@codeaurora.org, ionela.voinescu@arm.com
Cc: peterz@infradead.org, mingo@redhat.com,
	vincent.guittot@linaro.org, viresh.kumar@linaro.org,
	linux-arm-kernel@lists.infradead.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	Steve Capper <steve.capper@arm.com>
Subject: [PATCH v5 2/7] arm64: trap to EL1 accesses to AMU counters from EL0
Date: Wed, 26 Feb 2020 13:29:42 +0000	[thread overview]
Message-ID: <20200226132947.29738-3-ionela.voinescu@arm.com> (raw)
In-Reply-To: <20200226132947.29738-1-ionela.voinescu@arm.com>

The activity monitors extension is an optional extension introduced
by the ARMv8.4 CPU architecture. In order to access the activity
monitors counters safely, if desired, the kernel should detect the
presence of the extension through the feature register, and mediate
the access.

Therefore, disable direct accesses to activity monitors counters
from EL0 (userspace) and trap them to EL1 (kernel).

To be noted that the ARM64_AMU_EXTN kernel config and the disable_amu
kernel parameter do not have an effect on this code. Given that the
amuserenr_el0 resets to an UNKNOWN value, setting the trap of EL0
accesses to EL1 is always attempted for safety and security
considerations. Therefore firmware should still ensure accesses to
AMU registers are not trapped in EL2/EL3 as this code cannot be
bypassed if the CPU implements the Activity Monitors Unit.

Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
---
 arch/arm64/include/asm/assembler.h | 10 ++++++++++
 arch/arm64/mm/proc.S               |  3 +++
 2 files changed, 13 insertions(+)

diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index aca337d79d12..c5487806273f 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -430,6 +430,16 @@ USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
 9000:
 	.endm
 
+/*
+ * reset_amuserenr_el0 - reset AMUSERENR_EL0 if AMUv1 present
+ */
+	.macro	reset_amuserenr_el0, tmpreg
+	mrs	\tmpreg, id_aa64pfr0_el1	// Check ID_AA64PFR0_EL1
+	ubfx	\tmpreg, \tmpreg, #ID_AA64PFR0_AMU_SHIFT, #4
+	cbz	\tmpreg, .Lskip_\@		// Skip if no AMU present
+	msr_s	SYS_AMUSERENR_EL0, xzr		// Disable AMU access from EL0
+.Lskip_\@:
+	.endm
 /*
  * copy_page - copy src to dest using temp registers t1-t8
  */
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index aafed6902411..7103027b4e64 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -131,6 +131,7 @@ alternative_endif
 	ubfx	x11, x11, #1, #1
 	msr	oslar_el1, x11
 	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
+	reset_amuserenr_el0 x0			// Disable AMU access from EL0
 
 alternative_if ARM64_HAS_RAS_EXTN
 	msr_s	SYS_DISR_EL1, xzr
@@ -423,6 +424,8 @@ SYM_FUNC_START(__cpu_setup)
 	isb					// Unmask debug exceptions now,
 	enable_dbg				// since this is per-cpu
 	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
+	reset_amuserenr_el0 x0			// Disable AMU access from EL0
+
 	/*
 	 * Memory region attributes
 	 */
-- 
2.17.1


  parent reply	other threads:[~2020-02-26 13:30 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-26 13:29 [PATCH v5 0/7] arm64: ARMv8.4 Activity Monitors support Ionela Voinescu
2020-02-26 13:29 ` [PATCH v5 1/7] arm64: add support for the AMU extension v1 Ionela Voinescu
2020-02-28 10:32   ` Catalin Marinas
2020-03-02 14:23     ` Ionela Voinescu
2020-03-03 16:58       ` Catalin Marinas
2020-03-04  0:24         ` Ionela Voinescu
2020-02-26 13:29 ` Ionela Voinescu [this message]
2020-02-28 16:44   ` [PATCH v5 2/7] arm64: trap to EL1 accesses to AMU counters from EL0 James Morse
2020-03-04  0:29     ` Ionela Voinescu
2020-02-26 13:29 ` [PATCH v5 3/7] arm64/kvm: disable access to AMU registers from kvm guests Ionela Voinescu
2020-02-27 19:58   ` Marc Zyngier
2020-03-02 14:32     ` Ionela Voinescu
2020-03-09 14:25     ` Ionela Voinescu
2020-03-09 14:57       ` Marc Zyngier
2020-02-26 13:29 ` [PATCH v5 4/7] Documentation: arm64: document support for the AMU extension Ionela Voinescu
2020-02-26 13:29 ` [PATCH v5 5/7] cpufreq: add function to get the hardware max frequency Ionela Voinescu
2020-02-26 13:29 ` [PATCH v5 6/7] arm64: use activity monitors for frequency invariance Ionela Voinescu
2020-02-27  8:43   ` Lukasz Luba
2020-02-26 13:29 ` [PATCH v5 7/7] clocksource/drivers/arm_arch_timer: validate arch_timer_rate Ionela Voinescu
2020-02-26 18:24 ` [PATCH v5 0/7] arm64: ARMv8.4 Activity Monitors support Valentin Schneider

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200226132947.29738-3-ionela.voinescu@arm.com \
    --to=ionela.voinescu@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=dietmar.eggemann@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lukasz.luba@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=pkondeti@codeaurora.org \
    --cc=rjw@rjwysocki.net \
    --cc=steve.capper@arm.com \
    --cc=sudeep.holla@arm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=valentin.schneider@arm.com \
    --cc=vincent.guittot@linaro.org \
    --cc=viresh.kumar@linaro.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).