From: Matthias Kaehlcke <mka@chromium.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Dikshita Agarwal <dikshita@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Matthias Kaehlcke <mka@chromium.org>
Subject: [PATCH v2] arm64: dts: sc7180: Move venus node to the correct position
Date: Wed, 26 Feb 2020 13:04:55 -0800 [thread overview]
Message-ID: <20200226130438.v2.1.I15e0f7eff0c67a2b49d4992f9d80fc1d2fdadf63@changeid> (raw)
Per convention device nodes for SC7180 should be ordered by address.
This is currently not the case for the venus node, move it to the
correct position.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Excuses for sending v2 so shortly after v1, it seems ok in this case
since v1 is obviously wrong and the patch is not likely to be
controversial otherwise.
Changes in v2:
- insert the venus node *after* the usb@a6f8800 node, not before
arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++--------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 253274d5f04c..5f97945e16a4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1332,6 +1332,32 @@ system-cache-controller@9200000 {
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ venus: video-codec@aa00000 {
+ compatible = "qcom,sc7180-venus";
+ reg = <0 0x0aa00000 0 0xff000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&videocc VENUS_GDSC>,
+ <&videocc VCODEC0_GDSC>;
+ power-domain-names = "venus", "vcodec0";
+ clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+ <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+ <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+ clock-names = "core", "iface", "bus",
+ "vcodec0_core", "vcodec0_bus";
+ iommus = <&apps_smmu 0x0c00 0x60>;
+ memory-region = <&venus_mem>;
+
+ video-decoder {
+ compatible = "venus-decoder";
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ };
+ };
+
usb_1: usb@a6f8800 {
compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
@@ -1538,32 +1564,6 @@ dispcc: clock-controller@af00000 {
#power-domain-cells = <1>;
};
- venus: video-codec@aa00000 {
- compatible = "qcom,sc7180-venus";
- reg = <0 0x0aa00000 0 0xff000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&videocc VENUS_GDSC>,
- <&videocc VCODEC0_GDSC>;
- power-domain-names = "venus", "vcodec0";
- clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
- <&videocc VIDEO_CC_VENUS_AHB_CLK>,
- <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
- <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
- <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
- clock-names = "core", "iface", "bus",
- "vcodec0_core", "vcodec0_bus";
- iommus = <&apps_smmu 0x0c00 0x60>;
- memory-region = <&venus_mem>;
-
- video-decoder {
- compatible = "venus-decoder";
- };
-
- video-encoder {
- compatible = "venus-encoder";
- };
- };
-
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7180-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
--
2.25.1.481.gfbce0eb801-goog
next reply other threads:[~2020-02-26 21:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-26 21:04 Matthias Kaehlcke [this message]
2020-02-26 22:06 ` [PATCH v2] arm64: dts: sc7180: Move venus node to the correct position Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200226130438.v2.1.I15e0f7eff0c67a2b49d4992f9d80fc1d2fdadf63@changeid \
--to=mka@chromium.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dikshita@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).