From: rentao.bupt@gmail.com
To: Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Colin Ian King <colin.king@canonical.com>,
Stephen Boyd <swboyd@chromium.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
taoren@fb.com
Cc: Tao Ren <rentao.bupt@gmail.com>
Subject: [PATCH v4 3/7] usb: gadget: aspeed: add ast2600 vhub support
Date: Wed, 26 Feb 2020 15:03:42 -0800 [thread overview]
Message-ID: <20200226230346.672-4-rentao.bupt@gmail.com> (raw)
In-Reply-To: <20200226230346.672-1-rentao.bupt@gmail.com>
From: Tao Ren <rentao.bupt@gmail.com>
Add AST2600 support in aspeed-vhub driver. There are 3 major differences
between AST2500 and AST2600 vhub:
- AST2600 supports 7 downstream ports while AST2500 supports 5.
- AST2600 supports 21 generic endpoints while AST2500 supports 15.
- EP0 data buffer's 8-byte DMA alignment restriction is removed from
AST2600.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
No Change in v3/v4.
Changes in v2:
- removed "ast_vhub_config" related logic.
drivers/usb/gadget/udc/aspeed-vhub/Kconfig | 4 ++--
drivers/usb/gadget/udc/aspeed-vhub/core.c | 3 +++
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig
index 83ba8a2eb6af..605500b19cf3 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig
+++ b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig
@@ -4,5 +4,5 @@ config USB_ASPEED_VHUB
depends on ARCH_ASPEED || COMPILE_TEST
depends on USB_LIBCOMPOSITE
help
- USB peripheral controller for the Aspeed AST2500 family
- SoCs supporting the "vHub" functionality and USB2.0
+ USB peripheral controller for the Aspeed AST2400, AST2500 and
+ AST2600 family SoCs supporting the "vHub" functionality and USB2.0
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index f8ab8e012f34..f8d35dd60c34 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -423,6 +423,9 @@ static const struct of_device_id ast_vhub_dt_ids[] = {
{
.compatible = "aspeed,ast2500-usb-vhub",
},
+ {
+ .compatible = "aspeed,ast2600-usb-vhub",
+ },
{ }
};
MODULE_DEVICE_TABLE(of, ast_vhub_dt_ids);
--
2.17.1
next prev parent reply other threads:[~2020-02-26 23:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-26 23:03 [PATCH v4 0/7] aspeed-g6: enable usb support rentao.bupt
2020-02-26 23:03 ` [PATCH v4 1/7] usb: gadget: aspeed: support per-vhub usb descriptors rentao.bupt
2020-02-27 4:01 ` Benjamin Herrenschmidt
2020-02-26 23:03 ` [PATCH v4 2/7] usb: gadget: aspeed: read vhub properties from device tree rentao.bupt
2020-02-27 4:09 ` Benjamin Herrenschmidt
2020-02-27 22:29 ` Tao Ren
2020-02-26 23:03 ` rentao.bupt [this message]
2020-02-27 4:09 ` [PATCH v4 3/7] usb: gadget: aspeed: add ast2600 vhub support Benjamin Herrenschmidt
2020-02-26 23:03 ` [PATCH v4 4/7] ARM: dts: aspeed-g6: add usb functions rentao.bupt
2020-02-27 4:10 ` Benjamin Herrenschmidt
2020-02-27 5:54 ` Joel Stanley
2020-02-26 23:03 ` [PATCH v4 5/7] ARM: dts: aspeed-g5: add vhub port and endpoint properties rentao.bupt
2020-02-27 4:10 ` Benjamin Herrenschmidt
2020-02-27 5:54 ` Joel Stanley
2020-02-26 23:03 ` [PATCH v4 6/7] ARM: dts: aspeed-g4: " rentao.bupt
2020-02-27 4:10 ` Benjamin Herrenschmidt
2020-02-27 5:54 ` Joel Stanley
2020-02-27 22:34 ` Tao Ren
2020-02-26 23:03 ` [PATCH v4 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub rentao.bupt
2020-02-27 4:04 ` Benjamin Herrenschmidt
2020-02-27 5:52 ` Joel Stanley
2020-02-27 16:55 ` Rob Herring
2020-02-27 22:42 ` Tao Ren
2020-02-27 23:10 ` Tao Ren
2020-02-28 2:17 ` Tao Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200226230346.672-4-rentao.bupt@gmail.com \
--to=rentao.bupt@gmail.com \
--cc=andrew@aj.id.au \
--cc=balbi@kernel.org \
--cc=benh@kernel.crashing.org \
--cc=chunfeng.yun@mediatek.com \
--cc=colin.king@canonical.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=taoren@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).