From: zanussi@kernel.org
To: LKML <linux-kernel@vger.kernel.org>,
linux-rt-users <linux-rt-users@vger.kernel.org>,
Steven Rostedt <rostedt@goodmis.org>,
Thomas Gleixner <tglx@linutronix.de>,
Carsten Emde <C.Emde@osadl.org>, John Kacur <jkacur@redhat.com>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Daniel Wagner <wagi@monom.org>, Tom Zanussi <zanussi@kernel.org>
Subject: [PATCH RT 16/23] sched: migrate_enable: Use select_fallback_rq()
Date: Thu, 27 Feb 2020 08:33:27 -0600 [thread overview]
Message-ID: <e39f1b40d8f989b76f0ca0e86b4bf42258dce04e.1582814004.git.zanussi@kernel.org> (raw)
In-Reply-To: <cover.1582814004.git.zanussi@kernel.org>
In-Reply-To: <cover.1582814004.git.zanussi@kernel.org>
From: Scott Wood <swood@redhat.com>
v4.14.170-rt75-rc2 stable review patch.
If anyone has any objections, please let me know.
-----------
[ Upstream commit adfa969d4cfcc995a9d866020124e50f1827d2d1 ]
migrate_enable() currently open-codes a variant of select_fallback_rq().
However, it does not have the "No more Mr. Nice Guy" fallback and thus
it will pass an invalid CPU to the migration thread if cpus_mask only
contains a CPU that is !active.
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
---
kernel/sched/core.c | 25 ++++++++++---------------
1 file changed, 10 insertions(+), 15 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 189e6f08575e..46324d2099e3 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -7008,6 +7008,7 @@ void migrate_enable(void)
if (p->migrate_disable_update) {
struct rq *rq;
struct rq_flags rf;
+ int cpu = task_cpu(p);
rq = task_rq_lock(p, &rf);
update_rq_clock(rq);
@@ -7017,21 +7018,15 @@ void migrate_enable(void)
p->migrate_disable_update = 0;
- WARN_ON(smp_processor_id() != task_cpu(p));
- if (!cpumask_test_cpu(task_cpu(p), &p->cpus_mask)) {
- const struct cpumask *cpu_valid_mask = cpu_active_mask;
- struct migration_arg arg;
- unsigned int dest_cpu;
-
- if (p->flags & PF_KTHREAD) {
- /*
- * Kernel threads are allowed on online && !active CPUs
- */
- cpu_valid_mask = cpu_online_mask;
- }
- dest_cpu = cpumask_any_and(cpu_valid_mask, &p->cpus_mask);
- arg.task = p;
- arg.dest_cpu = dest_cpu;
+ WARN_ON(smp_processor_id() != cpu);
+ if (!cpumask_test_cpu(cpu, &p->cpus_mask)) {
+ struct migration_arg arg = { p };
+ struct rq_flags rf;
+
+ rq = task_rq_lock(p, &rf);
+ update_rq_clock(rq);
+ arg.dest_cpu = select_fallback_rq(cpu, p);
+ task_rq_unlock(rq, p, &rf);
unpin_current_cpu();
preempt_lazy_enable();
--
2.14.1
next prev parent reply other threads:[~2020-02-27 14:35 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-27 14:33 [PATCH RT 00/23] Linux v4.14.170-rt75-rc2 zanussi
2020-02-27 14:33 ` [PATCH RT 01/23] Fix wrong-variable use in irq_set_affinity_notifier zanussi
2020-02-27 14:33 ` [PATCH RT 02/23] i2c: exynos5: Remove IRQF_ONESHOT zanussi
2020-02-27 14:33 ` [PATCH RT 03/23] i2c: hix5hd2: " zanussi
2020-02-27 14:33 ` [PATCH RT 04/23] x86: preempt: Check preemption level before looking at lazy-preempt zanussi
2020-02-27 14:33 ` [PATCH RT 05/23] sched: migrate_dis/enable: Use sleeping_lock…() to annotate sleeping points zanussi
2020-02-27 14:33 ` [PATCH RT 06/23] sched: __set_cpus_allowed_ptr: Check cpus_mask, not cpus_ptr zanussi
2020-02-27 14:33 ` [PATCH RT 07/23] sched: Remove dead __migrate_disabled() check zanussi
2020-02-27 14:33 ` [PATCH RT 08/23] sched: migrate disable: Protect cpus_ptr with lock zanussi
2020-02-27 14:33 ` [PATCH RT 09/23] lib/smp_processor_id: Don't use cpumask_equal() zanussi
2020-02-27 14:33 ` [PATCH RT 10/23] futex: Make the futex_hash_bucket spinlock_t again and bring back its old state zanussi
2020-02-27 14:33 ` [PATCH RT 11/23] locking/rtmutex: Clean ->pi_blocked_on in the error case zanussi
2020-02-27 14:33 ` [PATCH RT 12/23] lib/ubsan: Don't seralize UBSAN report zanussi
2020-02-27 14:33 ` [PATCH RT 13/23] kmemleak: Change the lock of kmemleak_object to raw_spinlock_t zanussi
2020-02-27 14:33 ` [PATCH RT 14/23] Revert "ARM: Initialize split page table locks for vector page" zanussi
2020-02-27 14:33 ` [PATCH RT 15/23] locking: Make spinlock_t and rwlock_t a RCU section on RT zanussi
2020-02-27 14:33 ` zanussi [this message]
2020-02-27 14:33 ` [PATCH RT 17/23] sched: Lazy migrate_disable processing zanussi
2020-02-27 14:33 ` [PATCH RT 18/23] sched: migrate_enable: Use stop_one_cpu_nowait() zanussi
2020-02-27 14:33 ` [PATCH RT 19/23] sched/core: migrate_enable() must access takedown_cpu_task on !HOTPLUG_CPU zanussi
2020-02-27 14:33 ` [PATCH RT 20/23] lib/smp_processor_id: Adjust check_preemption_disabled() zanussi
2020-02-27 14:33 ` [PATCH RT 21/23] sched: migrate_enable: Busy loop until the migration request is completed zanussi
2020-03-03 19:56 ` Scott Wood
2020-03-03 20:39 ` Tom Zanussi
2020-03-03 21:19 ` Scott Wood
2020-03-03 21:54 ` Steven Rostedt
2020-03-05 13:38 ` David Laight
2020-03-05 17:58 ` Tom Zanussi
2020-02-27 14:33 ` [PATCH RT 22/23] sched/deadline: Ensure inactive_timer runs in hardirq context zanussi
2020-02-27 14:33 ` [PATCH RT 23/23] Linux 4.14.170-rt75-rc2 zanussi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e39f1b40d8f989b76f0ca0e86b4bf42258dce04e.1582814004.git.zanussi@kernel.org \
--to=zanussi@kernel.org \
--cc=C.Emde@osadl.org \
--cc=bigeasy@linutronix.de \
--cc=jkacur@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-users@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=wagi@monom.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).