From: Yoshio Furuyama <ytc-mb-yfuruyama7@kioxia.com>
To: miquel.raynal@bootlin.com, vigneshr@ti.com
Cc: linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org
Subject: [PATCH v2 2/2] mtd: spinand: toshiba: Support for new Kioxia Serial NAND
Date: Fri, 28 Feb 2020 12:12:04 +0900 [thread overview]
Message-ID: <9080db5a16d0fae0b0e04245e8aacc774107222c.1582603241.git.ytc-mb-yfuruyama7@kioxia.com> (raw)
In-Reply-To: <cover.1582603241.git.ytc-mb-yfuruyama7@kioxia.com>
Add support for new Kioxia products.
The new Kioxia products support program load x4 command, and have
HOLD_D bit which is equivalent to QE bit.
Signed-off-by: Yoshio Furuyama <ytc-mb-yfuruyama7@kioxia.com>
---
changelog[v2]:Split 2 patches.
drivers/mtd/nand/spi/toshiba.c | 119 +++++++++++++++++++++++++++++++++++------
1 file changed, 103 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index 700d86f..505f9f5 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -19,6 +19,18 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+static SPINAND_OP_VARIANTS(write_cache_x4_variants,
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_x4_variants,
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+/**
+ * Backward compatibility for 1st generation Serial NAND devices
+ * which don't support Quad Program Load operation.
+ */
static SPINAND_OP_VARIANTS(write_cache_variants,
SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -94,7 +106,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
}
static const struct spinand_info toshiba_spinand_table[] = {
- /* 3.3V 1Gb */
+ /* 3.3V 1Gb (1st generation) */
SPINAND_INFO("TC58CVG0S3HRAIG", 0xC2,
NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(8, 512),
@@ -104,7 +116,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
0,
SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
tx58cxgxsxraix_ecc_get_status)),
- /* 3.3V 2Gb */
+ /* 3.3V 2Gb (1st generation) */
SPINAND_INFO("TC58CVG1S3HRAIG", 0xCB,
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
@@ -114,7 +126,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
0,
SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
tx58cxgxsxraix_ecc_get_status)),
- /* 3.3V 4Gb */
+ /* 3.3V 4Gb (1st generation) */
SPINAND_INFO("TC58CVG2S0HRAIG", 0xCD,
NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
@@ -124,17 +136,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
0,
SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
tx58cxgxsxraix_ecc_get_status)),
- /* 3.3V 4Gb */
- SPINAND_INFO("TC58CVG2S0HRAIJ", 0xED,
- NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
- NAND_ECCREQ(8, 512),
- SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
- &write_cache_variants,
- &update_cache_variants),
- 0,
- SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
- tx58cxgxsxraix_ecc_get_status)),
- /* 1.8V 1Gb */
+ /* 1.8V 1Gb (1st generation) */
SPINAND_INFO("TC58CYG0S3HRAIG", 0xB2,
NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(8, 512),
@@ -144,7 +146,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
0,
SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
tx58cxgxsxraix_ecc_get_status)),
- /* 1.8V 2Gb */
+ /* 1.8V 2Gb (1st generation) */
SPINAND_INFO("TC58CYG1S3HRAIG", 0xBB,
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
@@ -154,7 +156,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
0,
SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
tx58cxgxsxraix_ecc_get_status)),
- /* 1.8V 4Gb */
+ /* 1.8V 4Gb (1st generation) */
SPINAND_INFO("TC58CYG2S0HRAIG", 0xBD,
NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
NAND_ECCREQ(8, 512),
@@ -164,6 +166,91 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
0,
SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
tx58cxgxsxraix_ecc_get_status)),
+
+ /*
+ * 2nd generation serial nand has HOLD_D which is equivalent to
+ * QE_BIT.
+ */
+ /* 3.3V 1Gb (2nd generation) */
+ SPINAND_INFO("TC58CVG0S3HRAIJ", 0xE2,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_x4_variants,
+ &update_cache_x4_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+ tx58cxgxsxraix_ecc_get_status)),
+ /* 3.3V 2Gb (2nd generation) */
+ SPINAND_INFO("TC58CVG1S3HRAIJ", 0xEB,
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_x4_variants,
+ &update_cache_x4_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+ tx58cxgxsxraix_ecc_get_status)),
+ /* 3.3V 4Gb (2nd generation) */
+ SPINAND_INFO("TC58CVG2S0HRAIJ", 0xED,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_x4_variants,
+ &update_cache_x4_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+ tx58cxgxsxraix_ecc_get_status)),
+ /* 3.3V 8Gb (2nd generation) */
+ SPINAND_INFO("TH58CVG3S0HRAIJ", 0xE4,
+ NAND_MEMORG(1, 4096, 256, 64, 4096, 80, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_x4_variants,
+ &update_cache_x4_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+ tx58cxgxsxraix_ecc_get_status)),
+ /* 1.8V 1Gb (2nd generation) */
+ SPINAND_INFO("TC58CYG0S3HRAIJ", 0xD2,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_x4_variants,
+ &update_cache_x4_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+ tx58cxgxsxraix_ecc_get_status)),
+ /* 1.8V 2Gb (2nd generation) */
+ SPINAND_INFO("TC58CYG1S3HRAIJ", 0xDB,
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_x4_variants,
+ &update_cache_x4_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+ tx58cxgxsxraix_ecc_get_status)),
+ /* 1.8V 4Gb (2nd generation) */
+ SPINAND_INFO("TC58CYG2S0HRAIJ", 0xDD,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_x4_variants,
+ &update_cache_x4_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+ tx58cxgxsxraix_ecc_get_status)),
+ /* 1.8V 8Gb (2nd generation) */
+ SPINAND_INFO("TH58CYG3S0HRAIJ", 0xD4,
+ NAND_MEMORG(1, 4096, 256, 64, 4096, 80, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_x4_variants,
+ &update_cache_x4_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&tx58cxgxsxraix_ooblayout,
+ tx58cxgxsxraix_ecc_get_status)),
};
static int toshiba_spinand_detect(struct spinand_device *spinand)
--
1.9.1
next prev parent reply other threads:[~2020-02-28 3:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 3:11 [PATCH v2 0/2] mtd: spinand: toshiba: Support for new Kioxia Serial NAND Yoshio Furuyama
2020-02-28 3:11 ` [PATCH v2 1/2] mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit) Yoshio Furuyama
2020-03-02 8:02 ` Schrempf Frieder
2020-03-02 9:12 ` Miquel Raynal
2020-03-05 2:43 ` Yoshio Furuyama
2020-02-28 3:12 ` Yoshio Furuyama [this message]
2020-03-02 8:03 ` [PATCH v2 2/2] mtd: spinand: toshiba: Support for new Kioxia Serial NAND Schrempf Frieder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9080db5a16d0fae0b0e04245e8aacc774107222c.1582603241.git.ytc-mb-yfuruyama7@kioxia.com \
--to=ytc-mb-yfuruyama7@kioxia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).