From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
vkoul@kernel.org, daniel.lezcano@linaro.org,
bjorn.andersson@linaro.org, sivaa@codeaurora.org,
Andy Gross <agross@kernel.org>, Zhang Rui <rui.zhang@intel.com>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding
Date: Fri, 28 Feb 2020 12:02:40 +0530 [thread overview]
Message-ID: <8309e39737c480b0835454cbc6db345c5a27ecd4.1582871139.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1582871139.git.amit.kucheria@linaro.org>
The qcom-tsens binding requires a SoC-specific and a TSENS
family-specific binding to be specified in the compatible string.
Since qcom,sc7180-tsens is not listed in the YAML binding, we see the
following warnings in 'make dtbs_check'. Fix them.
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a8..13e294328932 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@ properties:
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- qcom,sdm845-tsens
+ - qcom,sc7180-tsens
- const: qcom,tsens-v2
reg:
--
2.20.1
next prev parent reply other threads:[~2020-02-28 6:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 6:32 [PATCH v4 0/3] Cleanup dtbs_check warnings for tsens Amit Kucheria
2020-02-28 6:32 ` Amit Kucheria [this message]
2020-03-03 1:28 ` [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding Rob Herring
2020-03-03 8:05 ` Daniel Lezcano
2020-03-03 8:52 ` Amit Kucheria
2020-02-28 6:32 ` [PATCH v4 2/3] arm64: dts: qcom: msm8916:: Add qcom,tsens-v0_1 to msm8916.dtsi compatible Amit Kucheria
2020-02-28 6:32 ` [PATCH v4 3/3] arm64: dts: qcom: msm8996:: Add qcom,tsens-v2 to msm8996.dtsi compatible Amit Kucheria
2020-02-28 6:45 ` [PATCH v4 0/3] Cleanup dtbs_check warnings for tsens Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8309e39737c480b0835454cbc6db345c5a27ecd4.1582871139.git.amit.kucheria@linaro.org \
--to=amit.kucheria@linaro.org \
--cc=agross@kernel.org \
--cc=amit.kucheria@verdurent.com \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
--cc=sivaa@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).