From: shiva.linuxworks@gmail.com
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Shivamurthy Shastri <sshivamurthy@micron.com>
Subject: [PATCH v5 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names
Date: Fri, 28 Feb 2020 16:03:06 +0100 [thread overview]
Message-ID: <20200228150311.12184-2-sshivamurthy@micron.com> (raw)
In-Reply-To: <20200228150311.12184-1-sshivamurthy@micron.com>
From: Shivamurthy Shastri <sshivamurthy@micron.com>
In order to add new Micron SPI NAND devices, we generalized the OOB
layout structure and function names.
Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/mtd/nand/spi/micron.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 7d7b1f7fcf71..c028d0d7e236 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -34,38 +34,38 @@ static SPINAND_OP_VARIANTS(update_cache_variants,
SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
SPINAND_PROG_LOAD(false, 0, NULL, 0));
-static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *region)
+static int micron_8_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
{
if (section)
return -ERANGE;
- region->offset = 64;
- region->length = 64;
+ region->offset = mtd->oobsize / 2;
+ region->length = mtd->oobsize / 2;
return 0;
}
-static int mt29f2g01abagd_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *region)
+static int micron_8_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
{
if (section)
return -ERANGE;
/* Reserve 2 bytes for the BBM. */
region->offset = 2;
- region->length = 62;
+ region->length = (mtd->oobsize / 2) - 2;
return 0;
}
-static const struct mtd_ooblayout_ops mt29f2g01abagd_ooblayout = {
- .ecc = mt29f2g01abagd_ooblayout_ecc,
- .free = mt29f2g01abagd_ooblayout_free,
+static const struct mtd_ooblayout_ops micron_8_ooblayout = {
+ .ecc = micron_8_ooblayout_ecc,
+ .free = micron_8_ooblayout_free,
};
-static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
- u8 status)
+static int micron_8_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
{
switch (status & MICRON_STATUS_ECC_MASK) {
case STATUS_ECC_NO_BITFLIPS:
@@ -98,8 +98,8 @@ static const struct spinand_info micron_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
- mt29f2g01abagd_ecc_get_status)),
+ SPINAND_ECCINFO(µn_8_ooblayout,
+ micron_8_ecc_get_status)),
};
static int micron_spinand_detect(struct spinand_device *spinand)
--
2.17.1
next prev parent reply other threads:[~2020-02-28 15:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 15:03 [PATCH v5 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
2020-02-28 15:03 ` shiva.linuxworks [this message]
2020-02-28 15:03 ` [PATCH v5 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices shiva.linuxworks
2020-02-28 15:03 ` [PATCH v5 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies shiva.linuxworks
2020-03-09 10:32 ` [PATCH v5 0/6] Add new series Micron SPI NAND devices Miquel Raynal
2020-03-09 10:35 ` [EXT] " Shivamurthy Shastri (sshivamurthy)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200228150311.12184-2-sshivamurthy@micron.com \
--to=shiva.linuxworks@gmail.com \
--cc=bbrezillon@kernel.org \
--cc=frieder.schrempf@kontron.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=sshivamurthy@micron.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).