From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Stefan Wahren <stefan.wahren@i2se.com>,
Eric Anholt <eric@anholt.net>
Cc: wahrenst@gmx.net, devicetree@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: dts: bcm283x: Use firmware PM driver for V3D
Date: Tue, 3 Mar 2020 18:32:16 +0100 [thread overview]
Message-ID: <20200303173217.3987-1-nsaenzjulienne@suse.de> (raw)
The register based driver turned out to be unstable, specially on RPi3a+
but not limited to it. While a fix is being worked on, we roll back to
using firmware based scheme.
Fixes: e1dc2b2e1bef ("ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
See https://github.com/raspberrypi/linux/issues/3046 for more reference.
Note: I tested this on RPi3b, RPi3a+ and RPi2b.
arch/arm/boot/dts/bcm2835-common.dtsi | 1 -
arch/arm/boot/dts/bcm2835-rpi-common.dtsi | 12 ++++++++++++
arch/arm/boot/dts/bcm2835.dtsi | 1 +
arch/arm/boot/dts/bcm2836.dtsi | 1 +
arch/arm/boot/dts/bcm2837.dtsi | 1 +
5 files changed, 15 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm2835-rpi-common.dtsi
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index 2b1d9d4c0cde..4119271c979d 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -130,7 +130,6 @@ v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
- power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
};
vc4: gpu {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..b78a57534611
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&v3d {
+ power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 53bf4579cc22..0549686134ea 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 82d6c4662ae4..b390006aef79 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2836";
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 9e95fee78e19..0199ec98cd61 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -1,5 +1,6 @@
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2837";
--
2.25.1
next reply other threads:[~2020-03-03 17:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 17:32 Nicolas Saenz Julienne [this message]
2020-03-03 18:17 ` [PATCH] ARM: dts: bcm283x: Use firmware PM driver for V3D Stefan Wahren
2020-03-03 18:37 ` Nicolas Saenz Julienne
2020-03-03 19:24 ` Stefan Wahren
2020-03-05 10:44 ` Nicolas Saenz Julienne
2020-03-06 20:33 ` Stefan Wahren
2020-03-09 15:41 ` Stefan Wahren
2020-03-09 19:22 ` Nicolas Saenz Julienne
2020-03-13 13:59 ` Stefan Wahren
2020-03-26 12:24 ` Nicolas Saenz Julienne
2020-03-26 17:24 ` Stefan Wahren
2020-03-27 0:35 ` Florian Fainelli
2020-03-27 10:41 ` Nicolas Saenz Julienne
2020-03-27 11:24 ` Stefan Wahren
2020-03-27 12:58 ` Nicolas Saenz Julienne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200303173217.3987-1-nsaenzjulienne@suse.de \
--to=nsaenzjulienne@suse.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=eric@anholt.net \
--cc=f.fainelli@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=stefan.wahren@i2se.com \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).