[02/11] EDAC/ghes: Setup DIMM label from DMI and use it in error reports
diff mbox series

Message ID 20200306151318.17422-3-rrichter@marvell.com
State New
Headers show
Series
  • EDAC/ghes: Cleanup, rework and improvement of memory reporting
Related show

Commit Message

Robert Richter March 6, 2020, 3:13 p.m. UTC
The ghes driver reports errors with 'unknown label' even if the actual
DIMM label is known, e.g.:

 EDAC MC0: 1 CE Single-bit ECC on unknown label (node:0 card:0
   module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM location:N0 DIMM_A0
   page:0x966a9b3 offset:0x0 grain:1 syndrome:0x0 - APEI location:
   node:0 card:0 module:0 rank:1 bank:0 col:13 bit_pos:16 DIMM
   location:N0 DIMM_A0 status(0x0000000000000400): Storage error in
   DRAM memory)

Fix this by using struct dimm_info's label string in error reports:

 EDAC MC0: 1 CE Single-bit ECC on N0 DIMM_A0 (node:0 card:0 module:0
   rank:1 bank:515 col:14 bit_pos:16 DIMM location:N0 DIMM_A0
   page:0x99223d8 offset:0x0 grain:1 syndrome:0x0 - APEI location:
   node:0 card:0 module:0 rank:1 bank:515 col:14 bit_pos:16 DIMM
   location:N0 DIMM_A0 status(0x0000000000000400): Storage error in
   DRAM memory)

The labels are initialized by reading the bank and device strings from
DMI. Now, the label information can also read from sysfs. E.g. a
ThunderX2 system will show the following:

 /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:N0 DIMM_A0
 /sys/devices/system/edac/mc/mc0/dimm1/dimm_label:N0 DIMM_B0
 /sys/devices/system/edac/mc/mc0/dimm2/dimm_label:N0 DIMM_C0
 /sys/devices/system/edac/mc/mc0/dimm3/dimm_label:N0 DIMM_D0
 /sys/devices/system/edac/mc/mc0/dimm4/dimm_label:N0 DIMM_E0
 /sys/devices/system/edac/mc/mc0/dimm5/dimm_label:N0 DIMM_F0
 /sys/devices/system/edac/mc/mc0/dimm6/dimm_label:N0 DIMM_G0
 /sys/devices/system/edac/mc/mc0/dimm7/dimm_label:N0 DIMM_H0
 /sys/devices/system/edac/mc/mc0/dimm8/dimm_label:N1 DIMM_I0
 /sys/devices/system/edac/mc/mc0/dimm9/dimm_label:N1 DIMM_J0
 /sys/devices/system/edac/mc/mc0/dimm10/dimm_label:N1 DIMM_K0
 /sys/devices/system/edac/mc/mc0/dimm11/dimm_label:N1 DIMM_L0
 /sys/devices/system/edac/mc/mc0/dimm12/dimm_label:N1 DIMM_M0
 /sys/devices/system/edac/mc/mc0/dimm13/dimm_label:N1 DIMM_N0
 /sys/devices/system/edac/mc/mc0/dimm14/dimm_label:N1 DIMM_O0
 /sys/devices/system/edac/mc/mc0/dimm15/dimm_label:N1 DIMM_P0

Since dimm_labels can be rewritten, that label will be used in a later
error report:

 # echo foobar >/sys/devices/system/edac/mc/mc0/dimm0/dimm_label
 # # some error injection here
 # dmesg | grep foobar
 [ 2119.784489] EDAC MC0: 1 CE Single-bit ECC on foobar (node:0 card:0
 module:0 rank:0 bank:769 col:1 bit_pos:16 DIMM location:foobar
 page:0x94d027 offset:0x0 grain:1 syndrome:0x0 - APEI location: node:0
 card:0 module:0 rank:0 bank:769 col:1 bit_pos:16 DIMM location:foobar
 status(0x0000000000000400): Storage error in DRAM memory)

Signed-off-by: Robert Richter <rrichter@marvell.com>
---
 drivers/edac/ghes_edac.c | 44 +++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 16 deletions(-)

Patch
diff mbox series

diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index cb3dab56a875..07fa3867cba1 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -87,16 +87,32 @@  static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg)
 		(*num_dimm)++;
 }
 
-static int get_dimm_smbios_index(struct mem_ctl_info *mci, u16 handle)
+static struct dimm_info *find_dimm_by_handle(struct mem_ctl_info *mci,
+					u16 handle)
 {
 	struct dimm_info *dimm;
 
 	mci_for_each_dimm(mci, dimm) {
 		if (dimm->smbios_handle == handle)
-			return dimm->idx;
+			return dimm;
 	}
 
-	return -1;
+	return NULL;
+}
+
+static void ghes_dimm_setup_label(struct dimm_info *dimm, u16 handle)
+{
+	const char *bank = NULL, *device = NULL;
+
+	dmi_memdev_name(handle, &bank, &device);
+
+	/* both strings must be non-zero */
+	if (bank && *bank && device && *device)
+		snprintf(dimm->label, sizeof(dimm->label),
+			"%s %s", bank, device);
+	else
+		snprintf(dimm->label, sizeof(dimm->label),
+			"unknown memory (handle: 0x%.4x)", handle);
 }
 
 static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
@@ -179,9 +195,7 @@  static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
 		dimm->dtype = DEV_UNKNOWN;
 		dimm->grain = 128;		/* Likely, worse case */
 
-		/*
-		 * FIXME: It shouldn't be hard to also fill the DIMM labels
-		 */
+		ghes_dimm_setup_label(dimm, entry->handle);
 
 		if (dimm->nr_pages) {
 			edac_dbg(1, "DIMM%i: %s size = %d MB%s\n",
@@ -344,19 +358,17 @@  void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
 	if (mem_err->validation_bits & CPER_MEM_VALID_BIT_POSITION)
 		p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos);
 	if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) {
-		const char *bank = NULL, *device = NULL;
-		int index = -1;
+		struct dimm_info *dimm;
 
-		dmi_memdev_name(mem_err->mem_dev_handle, &bank, &device);
-		if (bank != NULL && device != NULL)
-			p += sprintf(p, "DIMM location:%s %s ", bank, device);
-		else
+		dimm = find_dimm_by_handle(mci, mem_err->mem_dev_handle);
+		if (dimm) {
+			e->top_layer = dimm->idx;
+			strcpy(e->label, dimm->label);
+			p += sprintf(p, "DIMM location:%s ", dimm->label);
+		} else {
 			p += sprintf(p, "DIMM DMI handle: 0x%.4x ",
 				     mem_err->mem_dev_handle);
-
-		index = get_dimm_smbios_index(mci, mem_err->mem_dev_handle);
-		if (index >= 0)
-			e->top_layer = index;
+		}
 	}
 	if (p > e->location)
 		*(p - 1) = '\0';